[ English | Deutsch | español | Indonesia | English (United Kingdom) | русский ]

HAProxy and Keepalived in LXC containers

There can be a usecase where you might want to run HAProxy and Keepalived inside LXC containers. For instance, running these services on bare metal assumes that a default route for hosts should be set towards a public network. This scenario might be un-preferable for some deployments, especially in cases where you do not have standalone Load-Balancing hosts, but they’re co-located with other infra services instead.

Inventory overrides

In order to tell dynamic_inventory to generate a set of containers for haproxy, you need to create a file /etc/openstack_deploy/env.d/haproxy.yml with the following content:

container_skel:
  haproxy_container:
    properties:
      is_metal: false

Defining host networking

In order to make a public network available, you need to ensure having a corresponsive bridge on your hosts to which HAProxy containers will be plugged in with one side of a veth pair. The bridge should also contain a VLAN interface providing «public» connectivity.

You can create a bridge manually or leverage our systemd_networkd role which is capable of configuring required networking on hosts.

For the example below, let’s name our bridge br-public-api and public vlan with ID 40. In your user_variables.yml define the following variables:

_systemd_networkd_generic_devices:
  - NetDev:
      Name: bond0
      Kind: bond
    Bond:
      Mode: 802.3ad
      TransmitHashPolicy: layer3+4
      LACPTransmitRate: fast
      MIIMonitorSec: 100
    filename: 05-generic-bond0

_systemd_networkd_public_api_devices:
  - NetDev:
      Name: vlan-public-api
      Kind: vlan
    VLAN:
      Id: 40
    filename: 10-openstack-vlan-public-api
  - NetDev:
      Name: br-public-api
      Kind: bridge
    Bridge:
      ForwardDelaySec: 0
      HelloTimeSec: 2
      MaxAgeSec: 12
      STP: off
    filename: 11-openstack-br-public-api

openstack_hosts_systemd_networkd_devices: |-
  {% set devices = [] %}
  {% if is_metal %}
  {%   set _ = devices.extend(_systemd_networkd_generic_devices) %}
  {%   if inventory_hostname in groups['haproxy_hosts'] %}
  {%     set _ = devices.extend(_systemd_networkd_public_api_devices) %}
  {%   endif %}
  {% endif %}
  {{ devices }}

_systemd_networkd_bonded_networks:
  - interface: ens3
    filename: 05-generic-ens3
    bond: bond0
    link_config_overrides:
      Match:
        MACAddress: df:25:83:e1:77:c8
  - interface: ens6
    filename: 05-generic-ens6
    bond: bond0
    link_config_overrides:
      Match:
        MACAddress: df:25:83:e1:77:c9
  - interface: bond0
    filename: 05-general-bond0
    vlan:
      - vlan-public-api

_systemd_networkd_public_api_networks:
  - interface: "vlan-public-api"
    bridge: "br-public-api"
    filename: 10-openstack-vlan-public-api
  - interface: "br-pub-api"
    filename: "11-openstack-br-public-api"

openstack_hosts_systemd_networkd_networks: |-
  {% set networks = [] %}
  {% if is_metal %}
  {%   set _ = networks.extend(_systemd_networkd_bonded_networks) %}
  {%   if inventory_hostname in groups['haproxy_hosts'] %}
  {%     set _ = networks.extend(_systemd_networkd_public_api_networks) %}
  {%   endif %}
  {% endif %}
  {{ networks }}

Defining container networking

In case of deploying HAProxy inside LXC you need to ensure connectivity with a public network and that haproxy_bind_external_lb_vip_address will be present inside the container as well as external_lb_vip_address is reachable.

For that we need to do the following series of changes in the openstack_user_config.yml file.

  1. In cidr_networks add a network which should be used as «public» network for accessing APIs. For example we will be using 203.0.113.128/28:

cidr_networks:
  ...
  public_api: 203.0.113.128/28
  1. In used_ips you need to reserve IP address for your gateway and haproxy_keepalived_external_vip_cidr/external_lb_vip_address

    used_ips:
      ...
      - "203.0.113.129"
      - "203.0.113.140-203.0.113.142"
    
  2. In provider_networks you need to define a new container network and assign it to HAproxy group.

    global_overrides:
      ...
      provider_networks:
        ...
        - network:
          group_binds:
            - haproxy
          type: "raw"
          container_bridge: "br-public-api"
          container_interface: "eth20"
          container_type: "veth"
          ip_from_q: public_api
          static_routes:
            - cidr: 0.0.0.0/0
              gateway: 203.0.113.129
    

While these are all changes, that need to be done in openstack_user_config.yml, there is one more override that needs to be applied.

As you might have spotted, we are defining a default route for the container through eth20. However, by default all containers have their default route through eth0, which is a local LXC bridge where address is recieved through DHCP. In order to avoid a conflict, you need to ensure that the default route will not be set for eth0 inside the container. For that, create a file /etc/openstack_deploy/group_vars/haproxy with the following content:

lxc_container_networks:
  lxcbr0_address:
    bridge: "{{ lxc_net_bridge | default('lxcbr0') }}"
    bridge_type: "{{ lxc_net_bridge_type | default('linuxbridge') }}"
    interface: eth0
    type: veth
    dhcp_use_routes: False

Configuring HAProxy binding inside containers

As IP provisioning is quite random inside containers, it may not always be handy to bind HAProxy to a specific IP address. If that’s the case, you can bind HAProxy to an interface instead, since we always know the interface names inside containers. With that keepalived public/internal VIPs are supposed to be added in used_ips, so you still can define them freely.

Example bellow shows a possible content in user_variables.yml:

haproxy_bind_external_lb_vip_interface: eth20
haproxy_bind_internal_lb_vip_interface: eth1
haproxy_bind_external_lb_vip_address: "*"
haproxy_bind_internal_lb_vip_address: "*"
haproxy_keepalived_external_vip_cidr: 203.0.113.140/32
haproxy_keepalived_internal_vip_cidr: 172.29.236.9/32
haproxy_keepalived_external_interface: "{{ haproxy_bind_external_lb_vip_interface }}"
haproxy_keepalived_internal_interface: "{{ haproxy_bind_internal_lb_vip_interface }}"

Alternatively, you can detect IPs used inside your containers to configure haproxy binds. This can be done by reffering to container_networks mapping:

haproxy_bind_external_lb_vip_address: "{{ container_networks['public_api_address']['address'] }}"
haproxy_bind_internal_lb_vip_address: "{{ container_networks['management_address']['address'] }}"

Creating containers

Once all steps above are accomplished, it’s time to create our new haproxy containers. For that run the following command:

# openstack-ansible playbooks/lxc-containers-create.yml --limit haproxy,lxc_hosts