Trove Configuration Options

The following is an overview of all available configuration options in Trove. To see sample configuration file, see Trove Sample Configuration File.

DEFAULT

debug

Type:

boolean

Default:

False

Mutable:

This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append

Type:

string

Default:

<None>

Mutable:

This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations

Group	Name
DEFAULT	log-config
DEFAULT	log_config

log_date_format

Type:

string

Default:

%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file

Type:

string

Default:

<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations

Group	Name
DEFAULT	logfile

log_dir

Type:

string

Default:

<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations

Group	Name
DEFAULT	logdir

watch_log_file

Type:

boolean

Default:

False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

This function is known to have bene broken for long time, and depends on the unmaintained library

use_syslog

Type:

boolean

Default:

False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal

Type:

boolean

Default:

False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility

Type:

string

Default:

LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json

Type:

boolean

Default:

False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr

Type:

boolean

Default:

False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog

Type:

boolean

Default:

False

Log output to Windows Event Log.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Windows support is no longer maintained.

log_color

Type:

boolean

Default:

False

(Optional) Set the ‘color’ key according to log levels. This option takes effect only when logging to stderr or stdout is used. This option is ignored if log_config_append is set.

log_rotate_interval

Type:

integer

Default:

1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.

log_rotate_interval_type

Type:

string

Default:

days

Valid Values:

Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count

Type:

integer

Default:

30

Maximum number of rotated log files.

max_logfile_size_mb

Type:

integer

Default:

200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type

Type:

string

Default:

none

Valid Values:

interval, size, none

Log rotation type.

Possible values

interval

Rotate logs at predefined time intervals.

size

Rotate logs once they reach a predefined size.

none

Do not rotate log files.

logging_context_format_string

Type:

string

Default:

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string

Type:

string

Default:

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix

Type:

string

Default:

%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix

Type:

string

Default:

%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format

Type:

string

Default:

%(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels

Type:

list

Default:

['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors

Type:

boolean

Default:

False

Enables or disables publication of error events.

instance_format

Type:

string

Default:

"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format

Type:

string

Default:

"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval

Type:

integer

Default:

0

Interval, number of seconds, of log rate limiting.

rate_limit_burst

Type:

integer

Default:

0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level

Type:

string

Default:

CRITICAL

Valid Values:

CRITICAL, ERROR, INFO, WARNING, DEBUG, ‘’

Log level name used by rate limiting. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations

Type:

boolean

Default:

False

Enables or disables fatal status of deprecations.

rpc_conn_pool_size

Type:

integer

Default:

30

Minimum Value:

1

Size of RPC connection pool.

Deprecated Variations

Group	Name
DEFAULT	rpc_conn_pool_size

conn_pool_min_size

Type:

integer

Default:

2

The pool size limit for connections expiration policy

conn_pool_ttl

Type:

integer

Default:

1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size

Type:

integer

Default:

64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations

Group	Name
DEFAULT	rpc_thread_pool_size

rpc_response_timeout

Type:

integer

Default:

60

Seconds to wait for a response from a call.

transport_url

Type:

string

Default:

rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange

Type:

string

Default:

openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

rpc_ping_enabled

Type:

boolean

Default:

False

Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping

cache

config_prefix

Type:

string

Default:

cache.oslo

Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.

expiration_time

Type:

integer

Default:

600

Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.

backend

Type:

string

Default:

dogpile.cache.null

Valid Values:

oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.pymemcache, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.redis_sentinel, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null

Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.

backend_argument

Type:

multi-valued

Default:

''

Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.

proxies

Type:

list

Default:

[]

Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.

enabled

Type:

boolean

Default:

False

Global toggle for caching.

debug_cache_backend

Type:

boolean

Default:

False

Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.

memcache_servers

Type:

list

Default:

['localhost:11211']

Memcache servers in the format of “host:port”. This is used by backends dependent on Memcached.If dogpile.cache.memcached or oslo_cache.memcache_pool is used and a given host refer to an IPv6 or a given domain refer to IPv6 then you should prefix the given address with the address family (inet6) (e.g inet6[::1]:11211, inet6:[fd12:3456:789a:1::1]:11211, inet6:[controller-0.internalapi]:11211). If the address family is not given then these backends will use the default inet address family which corresponds to IPv4

memcache_dead_retry

Type:

integer

Default:

300

Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_socket_timeout

Type:

floating point

Default:

1.0

Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_pool_maxsize

Type:

integer

Default:

10

Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).

memcache_pool_unused_timeout

Type:

integer

Default:

60

Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).

memcache_pool_connection_get_timeout

Type:

integer

Default:

10

Number of seconds that an operation will wait to get a memcache client connection.

memcache_pool_flush_on_reconnect

Type:

boolean

Default:

False

Global toggle if memcache will be flushed on reconnect. (oslo_cache.memcache_pool backend only).

memcache_sasl_enabled

Type:

boolean

Default:

False

Enable the SASL(Simple Authentication and SecurityLayer) if the SASL_enable is true, else disable.

memcache_username

Type:

string

Default:

<None>

the user name for the memcached which SASL enabled

memcache_password

Type:

string

Default:

<None>

the password for the memcached which SASL enabled

redis_server

Type:

string

Default:

localhost:6379

Redis server in the format of “host:port”

redis_db

Type:

integer

Default:

0

Minimum Value:

0

Database id in Redis server

redis_username

Type:

string

Default:

<None>

the user name for redis

redis_password

Type:

string

Default:

<None>

the password for redis

redis_sentinels

Type:

list

Default:

['localhost:26379']

Redis sentinel servers in the format of “host:port”

redis_socket_timeout

Type:

floating point

Default:

1.0

Timeout in seconds for every call to a server. (dogpile.cache.redis and dogpile.cache.redis_sentinel backends only).

redis_sentinel_service_name

Type:

string

Default:

mymaster

Service name of the redis sentinel cluster.

tls_enabled

Type:

boolean

Default:

False

Global toggle for TLS usage when communicating with the caching servers. Currently supported by dogpile.cache.bmemcache, dogpile.cache.pymemcache, oslo_cache.memcache_pool, dogpile.cache.redis and dogpile.cache.redis_sentinel.

tls_cafile

Type:

string

Default:

<None>

Path to a file of concatenated CA certificates in PEM format necessary to establish the caching servers’ authenticity. If tls_enabled is False, this option is ignored.

tls_certfile

Type:

string

Default:

<None>

Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.

tls_keyfile

Type:

string

Default:

<None>

Path to a single file containing the client’s private key in. Otherwise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.

tls_allowed_ciphers

Type:

string

Default:

<None>

Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available. Currently supported by dogpile.cache.bmemcache, dogpile.cache.pymemcache and oslo_cache.memcache_pool.

enable_socket_keepalive

Type:

boolean

Default:

False

Global toggle for the socket keepalive of dogpile’s pymemcache backend

socket_keepalive_idle

Type:

integer

Default:

1

Minimum Value:

0

The time (in seconds) the connection needs to remain idle before TCP starts sending keepalive probes. Should be a positive integer most greater than zero.

socket_keepalive_interval

Type:

integer

Default:

1

Minimum Value:

0

The time (in seconds) between individual keepalive probes. Should be a positive integer greater than zero.

socket_keepalive_count

Type:

integer

Default:

1

Minimum Value:

0

The maximum number of keepalive probes TCP should send before dropping the connection. Should be a positive integer greater than zero.

enable_retry_client

Type:

boolean

Default:

False

Enable retry client mechanisms to handle failure. Those mechanisms can be used to wrap all kind of pymemcache clients. The wrapper allows you to define how many attempts to make and how long to wait between attemots.

retry_attempts

Type:

integer

Default:

2

Minimum Value:

1

Number of times to attempt an action before failing.

retry_delay

Type:

floating point

Default:

0

Number of seconds to sleep between each attempt.

hashclient_retry_attempts

Type:

integer

Default:

2

Minimum Value:

1

Amount of times a client should be tried before it is marked dead and removed from the pool in the HashClient’s internal mechanisms.

hashclient_retry_delay

Type:

floating point

Default:

1

Time in seconds that should pass between retry attempts in the HashClient’s internal mechanisms.

dead_timeout

Type:

floating point

Default:

60

Time in seconds before attempting to add a node back in the pool in the HashClient’s internal mechanisms.

enforce_fips_mode

Type:

boolean

Default:

False

Global toggle for enforcing the OpenSSL FIPS mode. This feature requires Python support. This is available in Python 3.9 in all environments and may have been backported to older Python versions on select environments. If the Python executable used does not support OpenSSL FIPS mode, an exception will be raised. Currently supported by dogpile.cache.bmemcache, dogpile.cache.pymemcache and oslo_cache.memcache_pool.

cors

allowed_origin

Type:

list

Default:

<None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials

Type:

boolean

Default:

True

Indicate that the actual request can include user credentials

expose_headers

Type:

list

Default:

[]

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age

Type:

integer

Default:

3600

Maximum cache age of CORS preflight requests.

allow_methods

Type:

list

Default:

['OPTIONS', 'GET', 'HEAD', 'POST', 'PUT', 'DELETE', 'TRACE', 'PATCH']

Indicate which methods can be used during the actual request.

allow_headers

Type:

list

Default:

[]

Indicate which header field names may be used during the actual request.

database

sqlite_synchronous

Type:

boolean

Default:

True

If True, SQLite uses synchronous mode.

backend

Type:

string

Default:

sqlalchemy

The back end to use for the database.

connection

Type:

string

Default:

<None>

The SQLAlchemy connection string to use to connect to the database.

slave_connection

Type:

string

Default:

<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode

Type:

string

Default:

TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_wsrep_sync_wait

Type:

integer

Default:

<None>

For Galera only, configure wsrep_sync_wait causality checks on new connections. Default is None, meaning don’t configure any setting.

connection_recycle_time

Type:

integer

Default:

3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

max_pool_size

Type:

integer

Default:

5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries

Type:

integer

Default:

10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

retry_interval

Type:

integer

Default:

10

Interval between retries of opening a SQL connection.

max_overflow

Type:

integer

Default:

50

If set, use this value for max_overflow with SQLAlchemy.

connection_debug

Type:

integer

Default:

0

Minimum Value:

0

Maximum Value:

100

Verbosity of SQL debugging information: 0=None, 100=Everything.

connection_trace

Type:

boolean

Default:

False

Add Python stack traces to SQL as comment strings.

pool_timeout

Type:

integer

Default:

<None>

If set, use this value for pool_timeout with SQLAlchemy.

use_db_reconnect

Type:

boolean

Default:

False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval

Type:

integer

Default:

1

Seconds between retries of a database transaction.

db_inc_retry_interval

Type:

boolean

Default:

True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval

Type:

integer

Default:

10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries

Type:

integer

Default:

20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters

Type:

string

Default:

''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

healthcheck

path

Type:

string

Default:

/healthcheck

The path to respond to healtcheck requests on.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

detailed

Type:

boolean

Default:

False

Show more detailed information as part of the response. Security note: Enabling this option may expose sensitive details about the service being monitored. Be sure to verify that it will not violate your security policies.

backends

Type:

list

Default:

[]

Additional backends that can perform health checks and report that information back as part of a request.

allowed_source_ranges

Type:

list

Default:

[]

A list of network addresses to limit source ip allowed to access healthcheck information. Any request from ip outside of these network addresses are ignored.

ignore_proxied_requests

Type:

boolean

Default:

False

Ignore requests with proxy headers.

disable_by_file_path

Type:

string

Default:

<None>

Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.

disable_by_file_paths

Type:

list

Default:

[]

Check the presence of a file based on a port to determine if an application is running on a port. Expects a “port:path” list of strings. Used by DisableByFilesPortsHealthcheck plugin.

enable_by_file_paths

Type:

list

Default:

[]

Check the presence of files. Used by EnableByFilesHealthcheck plugin.

oslo_messaging_amqp

container_name

Type:

string

Default:

<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations

Group	Name
amqp1	container_name

idle_timeout

Type:

integer

Default:

0

Timeout for inactive connections (in seconds)

Deprecated Variations

Group	Name
amqp1	idle_timeout

trace

Type:

boolean

Default:

False

Debug: dump AMQP frames to stdout

Deprecated Variations

Group	Name
amqp1	trace

ssl

Type:

boolean

Default:

False

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file

Type:

string

Default:

''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations

Group	Name
amqp1	ssl_ca_file

ssl_cert_file

Type:

string

Default:

''

Self-identifying certificate PEM file for client authentication

Deprecated Variations

Group	Name
amqp1	ssl_cert_file

ssl_key_file

Type:

string

Default:

''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations

Group	Name
amqp1	ssl_key_file

ssl_key_password

Type:

string

Default:

<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations

Group	Name
amqp1	ssl_key_password

ssl_verify_vhost

Type:

boolean

Default:

False

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms

Type:

string

Default:

''

Space separated list of acceptable SASL mechanisms

Deprecated Variations

Group	Name
amqp1	sasl_mechanisms

sasl_config_dir

Type:

string

Default:

''

Path to directory that contains the SASL configuration

Deprecated Variations

Group	Name
amqp1	sasl_config_dir

sasl_config_name

Type:

string

Default:

''

Name of configuration file (without .conf suffix)

Deprecated Variations

Group	Name
amqp1	sasl_config_name

sasl_default_realm

Type:

string

Default:

''

SASL realm to use if no realm present in username

connection_retry_interval

Type:

integer

Default:

1

Minimum Value:

1

Seconds to pause before attempting to re-connect.

connection_retry_backoff

Type:

integer

Default:

2

Minimum Value:

0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max

Type:

integer

Default:

30

Minimum Value:

1

Maximum limit for connection_retry_interval + connection_retry_backoff

link_retry_delay

Type:

integer

Default:

10

Minimum Value:

1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry

Type:

integer

Default:

0

Minimum Value:

-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout

Type:

integer

Default:

30

Minimum Value:

5

The deadline for an rpc reply message delivery.

default_send_timeout

Type:

integer

Default:

30

Minimum Value:

5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout

Type:

integer

Default:

30

Minimum Value:

5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout

Type:

integer

Default:

600

Minimum Value:

1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode

Type:

string

Default:

dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost

Type:

boolean

Default:

True

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix

Type:

string

Default:

exclusive

address prefix used when sending to a specific server

Deprecated Variations

Group	Name
amqp1	server_request_prefix

broadcast_prefix

Type:

string

Default:

broadcast

address prefix used when broadcasting to all servers

Deprecated Variations

Group	Name
amqp1	broadcast_prefix

group_request_prefix

Type:

string

Default:

unicast

address prefix when sending to any server in group

Deprecated Variations

Group	Name
amqp1	group_request_prefix

rpc_address_prefix

Type:

string

Default:

openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix

Type:

string

Default:

openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address

Type:

string

Default:

multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address

Type:

string

Default:

unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address

Type:

string

Default:

anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange

Type:

string

Default:

<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange

Type:

string

Default:

<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

reply_link_credit

Type:

integer

Default:

200

Minimum Value:

1

Window size for incoming RPC Reply messages.

rpc_server_credit

Type:

integer

Default:

100

Minimum Value:

1

Window size for incoming RPC Request messages

notify_server_credit

Type:

integer

Default:

100

Minimum Value:

1

Window size for incoming Notification messages

pre_settled

Type:

multi-valued

Default:

rpc-cast

Default:

rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka

kafka_max_fetch_bytes

Type:

integer

Default:

1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout

Type:

floating point

Default:

1.0

Default timeout(s) for Kafka consumers

pool_size

Type:

integer

Default:

10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Driver no longer uses connection pool.

conn_pool_min_size

Type:

integer

Default:

2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Driver no longer uses connection pool.

conn_pool_ttl

Type:

integer

Default:

1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Driver no longer uses connection pool.

consumer_group

Type:

string

Default:

oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout

Type:

floating point

Default:

0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size

Type:

integer

Default:

16384

Size of batch for the producer async send

compression_codec

Type:

string

Default:

none

Valid Values:

none, gzip, snappy, lz4, zstd

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

enable_auto_commit

Type:

boolean

Default:

False

Enable asynchronous consumer commits

max_poll_records

Type:

integer

Default:

500

The maximum number of records returned in a poll call

security_protocol

Type:

string

Default:

PLAINTEXT

Valid Values:

PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism

Type:

string

Default:

PLAIN

Mechanism when security protocol is SASL

ssl_cafile

Type:

string

Default:

''

CA certificate PEM file used to verify the server certificate

ssl_client_cert_file

Type:

string

Default:

''

Client certificate PEM file used for authentication.

ssl_client_key_file

Type:

string

Default:

''

Client key PEM file used for authentication.

ssl_client_key_password

Type:

string

Default:

''

Client key password file used for authentication.

oslo_messaging_notifications

driver

Type:

multi-valued

Default:

''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations

Group	Name
DEFAULT	notification_driver

transport_url

Type:

string

Default:

<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations

Group	Name
DEFAULT	notification_transport_url

topics

Type:

list

Default:

['notifications']

AMQP topic used for OpenStack notifications.

Deprecated Variations

Group	Name
rpc_notifier2	topics
DEFAULT	notification_topics

retry

Type:

integer

Default:

-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit

amqp_durable_queues

Type:

boolean

Default:

False

Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be durable and this value will be ignored.

amqp_auto_delete

Type:

boolean

Default:

False

Auto-delete queues in AMQP.

Deprecated Variations

Group	Name
DEFAULT	amqp_auto_delete

ssl

Type:

boolean

Default:

False

Connect over SSL.

Deprecated Variations

Group	Name
oslo_messaging_rabbit	rabbit_use_ssl

ssl_version

Type:

string

Default:

''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations

Group	Name
oslo_messaging_rabbit	kombu_ssl_version

ssl_key_file

Type:

string

Default:

''

SSL key file (valid only if SSL enabled).

Deprecated Variations

Group	Name
oslo_messaging_rabbit	kombu_ssl_keyfile

ssl_cert_file

Type:

string

Default:

''

SSL cert file (valid only if SSL enabled).

Deprecated Variations

Group	Name
oslo_messaging_rabbit	kombu_ssl_certfile

ssl_ca_file

Type:

string

Default:

''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations

Group	Name
oslo_messaging_rabbit	kombu_ssl_ca_certs

ssl_enforce_fips_mode

Type:

boolean

Default:

False

Global toggle for enforcing the OpenSSL FIPS mode. This feature requires Python support. This is available in Python 3.9 in all environments and may have been backported to older Python versions on select environments. If the Python executable used does not support OpenSSL FIPS mode, an exception will be raised.

heartbeat_in_pthread

Type:

boolean

Default:

False

(DEPRECATED) It is recommend not to use this option anymore. Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread. This option should be set to True only for the wsgi services.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

The option is related to Eventlet which will be removed. In addition this has never worked as expected with services using eventlet for core service framework.

kombu_reconnect_delay

Type:

floating point

Default:

1.0

Minimum Value:

0.0

Maximum Value:

4.5

How long to wait (in seconds) before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations

Group	Name
DEFAULT	kombu_reconnect_delay

kombu_compression

Type:

string

Default:

<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout

Type:

integer

Default:

60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations

Group	Name
oslo_messaging_rabbit	kombu_reconnect_timeout

kombu_failover_strategy

Type:

string

Default:

round-robin

Valid Values:

round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method

Type:

string

Default:

AMQPLAIN

Valid Values:

PLAIN, AMQPLAIN, EXTERNAL, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations

Group	Name
DEFAULT	rabbit_login_method

rabbit_retry_interval

Type:

integer

Default:

1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff

Type:

integer

Default:

2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations

Group	Name
DEFAULT	rabbit_retry_backoff

rabbit_interval_max

Type:

integer

Default:

30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues

Type:

boolean

Default:

False

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations

Group	Name
DEFAULT	rabbit_ha_queues

rabbit_quorum_queue

Type:

boolean

Default:

False

Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a modern queue type for RabbitMQ implementing a durable, replicated FIFO queue based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0. If set this option will conflict with the HA queues (rabbit_ha_queues) aka mirrored queues, in other words the HA queues should be disabled. Quorum queues are also durable by default so the amqp_durable_queues option is ignored when this option is enabled.

rabbit_transient_quorum_queue

Type:

boolean

Default:

False

Use quorum queues for transients queues in RabbitMQ. Enabling this option will then make sure those queues are also using quorum kind of rabbit queues, which are HA by default.

rabbit_quorum_delivery_limit

Type:

integer

Default:

0

Each time a message is redelivered to a consumer, a counter is incremented. Once the redelivery count exceeds the delivery limit the message gets dropped or dead-lettered (if a DLX exchange has been configured) Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.

rabbit_quorum_max_memory_length

Type:

integer

Default:

0

By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of messages in the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.

Deprecated Variations

Group	Name
oslo_messaging_rabbit	rabbit_quroum_max_memory_length

rabbit_quorum_max_memory_bytes

Type:

integer

Default:

0

By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of memory bytes used by the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.

Deprecated Variations

Group	Name
oslo_messaging_rabbit	rabbit_quroum_max_memory_bytes

rabbit_transient_queues_ttl

Type:

integer

Default:

1800

Minimum Value:

0

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues. Setting 0 as value will disable the x-expires. If doing so, make sure you have a rabbitmq policy to delete the queues or you deployment will create an infinite number of queue over time.

rabbit_qos_prefetch_count

Type:

integer

Default:

0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold

Type:

integer

Default:

60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

heartbeat_rate

Type:

integer

Default:

3

How often times during the heartbeat_timeout_threshold we check the heartbeat.

direct_mandatory_flag

Type:

boolean

Default:

True

(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Mandatory flag no longer deactivable.

enable_cancel_on_failover

Type:

boolean

Default:

False

Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down

use_queue_manager

Type:

boolean

Default:

False

Should we use consistant queue names or random ones

hostname

Type:

string

Default:

node1.example.com

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Hostname used by queue manager. Defaults to the value returned by socket.gethostname().

processname

Type:

string

Default:

sphinx-build

Process name used by queue manager

rabbit_stream_fanout

Type:

boolean

Default:

False

Use stream queues in RabbitMQ (x-queue-type: stream). Streams are a new persistent and replicated data structure (“queue type”) in RabbitMQ which models an append-only log with non-destructive consumer semantics. It is available as of RabbitMQ 3.9.0. If set this option will replace all fanout queues with only one stream queue.

oslo_middleware

enable_proxy_headers_parsing

Type:

boolean

Default:

False

Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.

oslo_policy

enforce_scope

Type:

boolean

Default:

True

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

This configuration was added temporarily to facilitate a smooth transition to the new RBAC. OpenStack will always enforce scope checks. This configuration option is deprecated and will be removed in the 2025.2 cycle.

enforce_new_defaults

Type:

boolean

Default:

True

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together. If False, the deprecated policy check string is logically OR’d with the new policy check string, allowing for a graceful upgrade experience between releases with new policies, which is the default behavior.

policy_file

Type:

string

Default:

policy.json

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations

Group	Name
DEFAULT	policy_file

policy_default_rule

Type:

string

Default:

default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations

Group	Name
DEFAULT	policy_default_rule

policy_dirs

Type:

multi-valued

Default:

policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations

Group	Name
DEFAULT	policy_dirs

remote_content_type

Type:

string

Default:

application/x-www-form-urlencoded

Valid Values:

application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt

Type:

boolean

Default:

False

server identity verification for REST based policy check

remote_ssl_ca_crt_file

Type:

string

Default:

<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file

Type:

string

Default:

<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file

Type:

string

Default:

<None>

Absolute path client key file REST based policy check

profiler

enabled

Type:

boolean

Default:

False

Enable the profiling for all services on this node.

Default value is False (fully disable the profiling feature).

Possible values:

• True: Enables the feature

• False: Disables the feature. The profiling cannot be started via this project operations. If the profiling is triggered by another project, this project part will be empty.

Deprecated Variations

Group	Name
profiler	profiler_enabled

trace_sqlalchemy

Type:

boolean

Default:

False

Enable SQL requests profiling in services.

Default value is False (SQL requests won’t be traced).

Possible values:

• True: Enables SQL requests profiling. Each SQL query will be part of the trace and can the be analyzed by how much time was spent for that.

• False: Disables SQL requests profiling. The spent time is only shown on a higher level of operations. Single SQL queries cannot be analyzed this way.

trace_requests

Type:

boolean

Default:

False

Enable python requests package profiling.

Supported drivers: jaeger+otlp

Default value is False.

Possible values:

• True: Enables requests profiling.

• False: Disables requests profiling.

hmac_keys

Type:

string

Default:

SECRET_KEY

Secret key(s) to use for encrypting context data for performance profiling.

This string value should have the following format: <key1>[,<key2>,…<keyn>], where each key is some random string. A user who triggers the profiling via the REST API has to set one of these keys in the headers of the REST API call to include profiling results of this node for this particular project.

Both “enabled” flag and “hmac_keys” config options should be set to enable profiling. Also, to generate correct profiling information across all services at least one key needs to be consistent between OpenStack projects. This ensures it can be used from client side to generate the trace, containing information from all possible resources.

connection_string

Type:

string

Default:

messaging://

Connection string for a notifier backend.

Default value is messaging:// which sets the notifier to oslo_messaging.

Examples of possible values:

• messaging:// - use oslo_messaging driver for sending spans.

• redis://127.0.0.1:6379 - use redis driver for sending spans.

• mongodb://127.0.0.1:27017 - use mongodb driver for sending spans.

• elasticsearch://127.0.0.1:9200 - use elasticsearch driver for sending spans.

• jaeger://127.0.0.1:6831 - use jaeger tracing as driver for sending spans.

es_doc_type

Type:

string

Default:

notification

Document type for notification indexing in elasticsearch.

es_scroll_time

Type:

string

Default:

2m

This parameter is a time value parameter (for example: es_scroll_time=2m), indicating for how long the nodes that participate in the search will maintain relevant resources in order to continue and support it.

es_scroll_size

Type:

integer

Default:

10000

Elasticsearch splits large requests in batches. This parameter defines maximum size of each batch (for example: es_scroll_size=10000).

socket_timeout

Type:

floating point

Default:

0.1

Redissentinel provides a timeout option on the connections. This parameter defines that timeout (for example: socket_timeout=0.1).

sentinel_service_name

Type:

string

Default:

mymaster

Redissentinel uses a service name to identify a master redis service. This parameter defines the name (for example: sentinal_service_name=mymaster).

filter_error_trace

Type:

boolean

Default:

False

Enable filter traces that contain error/exception to a separated place.

Default value is set to False.

Possible values:

• True: Enable filter traces that contain error/exception.

• False: Disable the filter.

profiler_jaeger

service_name_prefix

Type:

string

Default:

<None>

Set service name prefix to Jaeger service name.

process_tags

Type:

dict

Default:

{}

Set process tracer tags.

profiler_otlp

service_name_prefix

Type:

string

Default:

<None>

Set service name prefix to OTLP exporters.