Installation Guide¶
Now the Tricircle can be played with Devstack for all-in-one single pod and multi-pod. You can build different Tricircle environments with Devstack according to your needs. In the near future there will be a manual installation guide in this installation guide that discussing how to install the Tricircle step by step without DevStack for users who install OpenStack manually.
Single pod installation with DevStack¶
Now the Tricircle can be played with all-in-one single pod DevStack. For the resource requirement to setup single pod DevStack, please refer to All-In-One Single Machine for installing DevStack in bare metal server or All-In-One Single VM for installing DevStack in virtual machine.
1 Install DevStack. Please refer to DevStack document on how to install DevStack into single VM or bare metal server.
2 In DevStack folder, create a file local.conf, and copy the content of https://github.com/openstack/tricircle/blob/master/devstack/local.conf.sample to local.conf, change password in the file if needed.
3 Run DevStack. In DevStack folder, run:
./stack.sh
4 After DevStack successfully starts, we need to create environment variables for the user (admin user as example in this document). In DevStack folder:
source openrc admin admin
5 Unset the region name environment variable, so that the command can be issued to specified region in following commands as needed:
unset OS_REGION_NAME
6 Check if services have been correctly registered. Run:
openstack --os-region-name=RegionOne endpoint list
you should get output looks like as following:
+----------------------------------+---------------+--------------+----------------+ | ID | Region | Service Name | Service Type | +----------------------------------+---------------+--------------+----------------+ | 3944592550764e349d0e82dba19a8e64 | RegionOne | cinder | volume | | 2ce48c73cca44e66a558ad69f1aa4436 | CentralRegion | tricircle | Tricircle | | d214b688923a4348b908525266db66ed | RegionOne | nova_legacy | compute_legacy | | c5dd60f23f2e4442865f601758a73982 | RegionOne | keystone | identity | | a99d5742c76a4069bb8621e0303c6004 | RegionOne | cinderv3 | volumev3 | | 8a3c711a24b2443a9a4420bcc302ed2c | RegionOne | glance | image | | e136af00d64a4cdf8b6b367210476f49 | RegionOne | nova | compute | | 4c3e5d52a90e493ab720213199ab22cd | RegionOne | neutron | network | | 8a1312afb6944492b47c5a35f1e5caeb | RegionOne | cinderv2 | volumev2 | | e0a5530abff749e1853a342b5747492e | CentralRegion | neutron | network | +----------------------------------+---------------+--------------+----------------+
“CentralRegion” is the region you set in local.conf via CENTRAL_REGION_NAME, whose default value is “CentralRegion”, we use it as the region for the central Neutron server and Tricircle Admin API(ID is 2ce48c73cca44e66a558ad69f1aa4436 in the above list). “RegionOne” is the normal OpenStack region which includes Nova, Cinder, Neutron.
7 Get token for the later commands. Run:
openstack --os-region-name=RegionOne token issue
8 Create pod instances for the Tricircle to manage the mapping between availability zone and OpenStack instances, the “$token” is obtained in the step 7:
curl -X POST http://127.0.0.1/tricircle/v1.0/pods -H "Content-Type: application/json" \ -H "X-Auth-Token: $token" -d '{"pod": {"region_name": "CentralRegion"}}' curl -X POST http://127.0.0.1/tricircle/v1.0/pods -H "Content-Type: application/json" \ -H "X-Auth-Token: $token" -d '{"pod": {"region_name": "RegionOne", "az_name": "az1"}}'
Pay attention to “region_name” parameter we specify when creating pod. Pod name should exactly match the region name registered in Keystone. In the above commands, we create pods named “CentralRegion” and “RegionOne”.
9 Create necessary resources in central Neutron server:
neutron --os-region-name=CentralRegion net-create net1 neutron --os-region-name=CentralRegion subnet-create net1 10.0.0.0/24
Please note that the net1 ID will be used in later step to boot VM.
10 Get image ID and flavor ID which will be used in VM booting:
glance --os-region-name=RegionOne image-list nova --os-region-name=RegionOne flavor-list
11 Boot a virtual machine:
nova --os-region-name=RegionOne boot --flavor 1 --image $image_id --nic net-id=$net_id vm1
12 Verify the VM is connected to the net1:
neutron --os-region-name=CentralRegion port-list neutron --os-region-name=RegionOne port-list nova --os-region-name=RegionOne list
The IP address of the VM could be found in local Neutron server and central Neutron server. The port has same uuid in local Neutron server and central Neutron Server.
Multi-pod Installation with DevStack¶
Introduction¶
In the single pod installation guide, we discuss how to deploy the Tricircle in one single pod with DevStack. Besides the Tricircle API and the central Neutron server, only one pod(one pod means one OpenStack instance) is running. Network is created with the default network type: local. Local type network will be only presented in one pod. If a local type network is already hosting virtual machines in one pod, you can not use it to boot virtual machine in another pod. That is to say, local type network doesn’t support cross-pod l2 networking.
With multi-pod installation of the Tricircle, you can try out cross-pod l2 networking and cross-pod l3 networking features.
To support cross-pod l2 networking, we have added both VLAN and VxLAN network type to the Tricircle. When a VLAN type network created via the central Neutron server is used to boot virtual machines in different pods, local Neutron server in each pod will create a VLAN type network with the same VLAN ID and physical network as the central network, so each pod should be configured with the same VLAN allocation pool and physical network. Then virtual machines in different pods can communicate with each other in the same physical network with the same VLAN tag. Similarly, for VxLAN network type, each pod should be configured with the same VxLAN allocation pool, so local Neutron server in each pod can create a VxLAN type network with the same VxLAN ID as is allocated by the central Neutron server.
Cross-pod l3 networking is supported in two ways in the Tricircle. If two networks connected to the router are of local type, we utilize a shared VLAN or VxLAN network to achieve cross-pod l3 networking. When a subnet is attached to a router via the central Neutron server, the Tricircle not only creates corresponding subnet and router in the pod, but also creates a “bridge” network. Both tenant network and “bridge” network are attached to the router. Each tenant will have one allocated VLAN or VxLAN ID, which is shared by the tenant’s “bridge” networks across pods. The CIDRs of “bridge” networks for one tenant are also the same, so the router interfaces in “bridge” networks across different pods can communicate with each other. By adding an extra route as following:
destination: CIDR of tenant network in another pod
nexthop: "bridge" network interface ip in another pod
When a virtual machine sends a packet whose receiver is in another network and in another pod, the packet first goes to router, then is forwarded to the router in another pod according to the extra route, at last the packet is sent to the target virtual machine. This route configuration job is triggered when user attaches a subnet to a router via the central Neutron server and the job is finished asynchronously.
If one of the network connected to the router is not local type, meaning that cross-pod l2 networking is supported in this network(like VLAN type), and the l2 network can be stretched into current pod, packets sent to the virtual machine in this network will not pass through the “bridge” network. Instead, packets first go to router, then are directly forwarded to the target virtual machine via the l2 network. A l2 network’s presence scope is determined by the network’s availability zone hint. If the l2 network is not able to be stretched into the current pod, the packets will still pass through the “bridge network”. For example, let’s say we have two pods, pod1 and pod2, and two availability zones, az1 and az2. Pod1 belongs to az1 and pod2 belongs to az2. If the availability zone hint of one VLAN type network is set to az1, this network can not be stretched to pod2. So packets sent from pod2 to virtual machines in this network still need to pass through the “bridge network”.
Prerequisite¶
In this guide we take two nodes deployment as an example. One node to run the Tricircle API, the central Neutron server and one pod, the other one node to run another pod. For VLAN network, both nodes should have two network interfaces, which are connected to the management network and provider VLAN network. The physical network infrastructure should support VLAN tagging. For VxLAN network, you can combine the management plane and data plane, in this case, only one network interface is needed. If you would like to try north-south networking, too, you should prepare one more network interface in the second node for the external network. In this guide, the external network is also VLAN type, so the local.conf sample is based on VLAN type external network setup. For the resource requirements to setup each node, please refer to All-In-One Single Machine for installing DevStack in bare metal server and All-In-One Single VM for installing DevStack in virtual machine.
Setup¶
In pod1 in node1 for Tricircle service, central Neutron and OpenStack RegionOne,
1 Install DevStack. Please refer to DevStack document on how to install DevStack into single VM or bare metal server.
2 In DevStack folder, create a file local.conf, and copy the content of local.conf node1 sample to local.conf, change password in the file if needed.
3 Change the following options according to your environment
change HOST_IP to your management interface ip:
HOST_IP=10.250.201.24
the format of Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS is (network_vlan_ranges=<physical network name>:<min vlan>:<max vlan>), you can change physical network name, but remember to adapt your change to the commands showed in this guide; also, change min VLAN and max vlan to adapt the VLAN range your physical network supports. You need to additionally specify the physical network “extern” to ensure the central neutron can create “extern” physical network which located in other pods:
Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS=(network_vlan_ranges=bridge:2001:3000,extern:3001:4000)
if you would like to also configure vxlan network, you can set Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS. the format of it is (vni_ranges=<min vxlan>:<max vxlan>):
Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS=(vni_ranges=1001:2000)
the format of OVS_BRIDGE_MAPPINGS is <physical network name>:<ovs bridge name>, you can change these names, but remember to adapt your change to the commands showed in this guide. You do not need specify the bridge mapping for “extern”, because this physical network is located in other pods:
OVS_BRIDGE_MAPPINGS=bridge:br-vlan
this option can be omitted if only VxLAN networks are needed
set TRICIRCLE_START_SERVICES to True to install the Tricircle service and central Neutron in node1:
TRICIRCLE_START_SERVICES=True
4 Create OVS bridge and attach the VLAN network interface to it
sudo ovs-vsctl add-br br-vlan sudo ovs-vsctl add-port br-vlan eth1
br-vlan is the OVS bridge name you configure on OVS_PHYSICAL_BRIDGE, eth1 is the device name of your VLAN network interface, this step can be omitted if only VxLAN networks are provided to tenants.
5 Run DevStack. In DevStack folder, run
./stack.sh
6 After DevStack successfully starts, begin to setup node2.
In pod2 in node2 for OpenStack RegionTwo,
1 Install DevStack. Please refer to DevStack document on how to install DevStack into single VM or bare metal server.
2 In DevStack folder, create a file local.conf, and copy the content of local.conf node2 sample to local.conf, change password in the file if needed.
3 Change the following options according to your environment
change HOST_IP to your management interface ip:
HOST_IP=10.250.201.25
change KEYSTONE_SERVICE_HOST to management interface ip of node1:
KEYSTONE_SERVICE_HOST=10.250.201.24
change KEYSTONE_AUTH_HOST to management interface ip of node1:
KEYSTONE_AUTH_HOST=10.250.201.24
the format of Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS is (network_vlan_ranges=<physical network name>:<min vlan>:<max vlan>), you can change physical network name, but remember to adapt your change to the commands showed in this guide; also, change min vlan and max vlan to adapt the vlan range your physical network supports:
Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS=(network_vlan_ranges=bridge:2001:3000,extern:3001:4000)
if you would like to also configure vxlan network, you can set Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS. the format of it is (vni_ranges=<min vxlan>:<max vxlan>):
Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS=(vni_ranges=1001:2000)
the format of OVS_BRIDGE_MAPPINGS is <physical network name>:<ovs bridge name>, you can change these names, but remember to adapt your change to the commands showed in this guide:
OVS_BRIDGE_MAPPINGS=bridge:br-vlan,extern:br-ext
if you only use vlan network for external network, it can be configured like:
OVS_BRIDGE_MAPPINGS=extern:br-ext
set TRICIRCLE_START_SERVICES to False(it’s True by default) so Tricircle services and central Neutron will not be started in node2:
TRICIRCLE_START_SERVICES=False
In this guide, we define two physical networks in node2, one is “bridge” for bridge network, the other one is “extern” for external network. If you do not want to try l3 north-south networking, you can simply remove the “extern” part. The external network type we use in the guide is VLAN, if you want to use other network type like flat, please refer to DevStack document.
4 Create OVS bridge and attach the VLAN network interface to it
sudo ovs-vsctl add-br br-vlan sudo ovs-vsctl add-port br-vlan eth1 sudo ovs-vsctl add-br br-ext sudo ovs-vsctl add-port br-ext eth2
br-vlan and br-ext are the OVS bridge names you configure on OVS_PHYSICAL_BRIDGE, eth1 and eth2 are the device names of your VLAN network interfaces, for the “bridge” network and the external network. Omit br-vlan if you only use vxlan network as tenant network.
5 Run DevStack. In DevStack folder, run
./stack.sh
6 After DevStack successfully starts, the setup is finished.
Note
In the newest version of codes, we may fail to boot an instance in node2. The reason is that Apache configuration file of Nova placement API doesn’t grant access right to the placement API bin folder. You can use “screen -r” to check placement API is working well or not. If placement API is in stuck status, manually update “/etc/apache2/sites-enabled/placement-api.conf” placement API configuration file in node2 to add the following section:
<Directory /usr/local/bin>
Require all granted
</Directory>
After update, restart Apache service first, and then placement API.
How to play¶
1 After DevStack successfully starts, we need to create environment variables for the user (admin user as example in this guide). In DevStack folder
source openrc admin admin
2 Unset the region name environment variable, so that the command can be issued to specified region in following commands as needed
unset OS_REGION_NAME
3 Check if services have been correctly registered. Run
openstack --os-region-name=RegionOne endpoint list
you should get output looks like as following
+----------------------------------+---------------+--------------+----------------+ | ID | Region | Service Name | Service Type | +----------------------------------+---------------+--------------+----------------+ | 4adaab1426d94959be46314b4bd277c2 | RegionOne | glance | image | | 5314a11d168042ed85a1f32d40030b31 | RegionTwo | nova_legacy | compute_legacy | | ea43c53a8ab7493dacc4db079525c9b1 | RegionOne | keystone | identity | | a1f263473edf4749853150178be1328d | RegionOne | neutron | network | | ebea16ec07d94ed2b5356fb0a2a3223d | RegionTwo | neutron | network | | 8d374672c09845f297755117ec868e11 | CentralRegion | tricircle | Tricircle | | e62e543bb9cf45f593641b2d00d72700 | RegionOne | nova_legacy | compute_legacy | | 540bdedfc449403b9befef3c2bfe3510 | RegionOne | nova | compute | | d533429712954b29b9f37debb4f07605 | RegionTwo | glance | image | | c8bdae9506cd443995ee3c89e811fb45 | CentralRegion | neutron | network | | 991d304dfcc14ccf8de4f00271fbfa22 | RegionTwo | nova | compute | +----------------------------------+---------------+--------------+----------------+
“CentralRegion” is the region you set in local.conf via CENTRAL_REGION_NAME, whose default value is “CentralRegion”, we use it as the region for the Tricircle API and central Neutron server. “RegionOne” and “RegionTwo” are the normal OpenStack regions which includes Nova, Neutron and Glance. Shared Keystone service is registered in “RegionOne”.
4 Get token for the later commands. Run
openstack --os-region-name=RegionOne token issue
5 Create pod instances for the Tricircle to manage the mapping between availability zones and OpenStack instances, “$token” is obtained in step 4
curl -X POST http://127.0.0.1/tricircle/v1.0/pods -H "Content-Type: application/json" \ -H "X-Auth-Token: $token" -d '{"pod": {"region_name": "CentralRegion"}}' curl -X POST http://127.0.0.1/tricircle/v1.0/pods -H "Content-Type: application/json" \ -H "X-Auth-Token: $token" -d '{"pod": {"region_name": "RegionOne", "az_name": "az1"}}' curl -X POST http://127.0.0.1/tricircle/v1.0/pods -H "Content-Type: application/json" \ -H "X-Auth-Token: $token" -d '{"pod": {"region_name": "RegionTwo", "az_name": "az2"}}'
Pay attention to “region_name” parameter we specify when creating pod. Pod name should exactly match the region name registered in Keystone. In the above commands, we create pods named “CentralRegion”, “RegionOne” and “RegionTwo”.
6 Create necessary resources in central Neutron server
neutron --os-region-name=CentralRegion net-create net1 neutron --os-region-name=CentralRegion subnet-create net1 10.0.1.0/24 neutron --os-region-name=CentralRegion net-create net2 neutron --os-region-name=CentralRegion subnet-create net2 10.0.2.0/24
Please note that the net1 and net2 ID will be used in later step to boot VM.
7 Get image ID and flavor ID which will be used in VM booting
glance --os-region-name=RegionOne image-list nova --os-region-name=RegionOne flavor-list glance --os-region-name=RegionTwo image-list nova --os-region-name=RegionTwo flavor-list
8 Boot virtual machines
nova --os-region-name=RegionOne boot --flavor 1 --image $image1_id --nic net-id=$net1_id vm1 nova --os-region-name=RegionTwo boot --flavor 1 --image $image2_id --nic net-id=$net2_id vm2
9 Verify the VMs are connected to the networks
neutron --os-region-name=CentralRegion port-list neutron --os-region-name=RegionOne port-list nova --os-region-name=RegionOne list neutron --os-region-name=RegionTwo port-list nova --os-region-name=RegionTwo list
The ip address of each VM could be found in local Neutron server and central Neutron server. The port has same uuid in local Neutron server and central Neutron Server.
10 Create external network and subnet
curl -X POST http://127.0.0.1:20001/v2.0/networks -H "Content-Type: application/json" \ -H "X-Auth-Token: $token" \ -d '{"network": {"name": "ext-net", "admin_state_up": true, "router:external": true, "provider:network_type": "vlan", "provider:physical_network": "extern", "availability_zone_hints": ["RegionTwo"]}}' neutron --os-region-name=CentralRegion subnet-create --name ext-subnet --disable-dhcp ext-net 163.3.124.0/24
Pay attention that when creating external network, we need to pass “availability_zone_hints” parameter, which is the name of the pod that will host external network.
Currently external network needs to be created before attaching subnet to the router, because plugin needs to utilize external network information to setup bridge network when handling interface adding operation. This limitation will be removed later.
11 Create router and attach subnets in central Neutron server
neutron --os-region-name=CentralRegion router-create router neutron --os-region-name=CentralRegion router-interface-add router $subnet1_id neutron --os-region-name=CentralRegion router-interface-add router $subnet2_id
12 Set router external gateway in central Neutron server
neutron --os-region-name=CentralRegion router-gateway-set router ext-net
Now virtual machine in the subnet attached to the router should be able to ping machines in the external network. In our test, we use hypervisor tool to directly start a virtual machine in the external network to check the network connectivity.
13 Launch VNC console and test connection
nova --os-region-name=RegionOne get-vnc-console vm1 novnc nova --os-region-name=RegionTwo get-vnc-console vm2 novnc
You should be able to ping vm1 from vm2 and vice versa.
14 Create floating ip in central Neutron server
neutron --os-region-name=CentralRegion floatingip-create ext-net
15 Associate floating ip
neutron --os-region-name=CentralRegion floatingip-list neutron --os-region-name=CentralRegion port-list neutron --os-region-name=CentralRegion floatingip-associate $floatingip_id $port_id
Now you should be able to access virtual machine with floating ip bound from the external network.
Manual Installation¶
The Tricircle works with Neutron to provide networking automation functionality across Neutron in multi-region OpenStack deployment. In this guide we discuss how to manually install the Tricircle with local and central Neutron server.
Local Neutron server, running with the Tricircle local plugin, is responsible for triggering cross-Neutron networking automation. Every OpenStack instance has one local Neutron service, registered in the same region with other core services like Nova, Cinder, Glance, etc. Central Neutron server, running with the Tricircle central plugin, is responsible for unified resource allocation and cross-Neutron networking building. Besides regions for each OpenStack instance, we also need one specific region for central Neutron service. Only the Tricircle administrator service needs to be registered in this region along with central Neutron service while other core services are not mandatory.
Installation with Central Neutron Server¶
1 Install the Tricircle package:
git clone https://github.com/openstack/tricircle.git cd tricircle pip install -e .
2 Register the Tricircle administrator API to Keystone:
openstack user create tricircle --password password openstack role add --project service --user tricircle service openstack service create tricircle --name tricircle --description "Cross Neutron Networking Automation Service" service_id=$(openstack service show tricircle -f value -c id) service_host=162.3.124.201 service_port=19999 service_region=CentralRegion service_url=http://$service_host:$service_port/v1.0 openstack endpoint create $service_id --publicurl $service_url --adminurl $service_url --internalurl $service_url --region $service_region
change password, service_host, service_port and service_region in the above commands to adapt your deployment. OpenStack CLI tool will automatically find the endpoints to send to registration requests. If you would like to specify the region for endpoints, use:
openstack --os-region-name <region_name> <command>
3 Generate the Tricircle configuration sample:
cd tricircle oslo-config-generator --config-file=etc/api-cfg-gen.conf oslo-config-generator --config-file=etc/xjob-cfg-gen.conf
The generated sample files are located in tricircle/etc
4 Configure the Tricircle administrator API:
cd tricircle/etc cp api.conf.sample api.conf
Edit etc/api.conf, for detail configuration information, please refer to the configuration guide. Below only options necessary to be changed are listed.
| Option | Description | Example |
|---|---|---|
| [DEFAULT] tricircle_db_connection | database connection string for tricircle | mysql+pymysql://root:password@ 127.0.0.1/tricircle?charset=utf8 |
| [keystone_authtoken] auth_type | authentication method | password |
| [keystone_authtoken] auth_url | keystone authorization url | http://$keystone_service_host/identity_admin |
| [keystone_authtoken] username | username of service account, needed for password authentication | tricircle |
| [keystone_authtoken] password | password of service account, needed for password authentication | password |
| [keystone_authtoken] user_domain_name | user domain name of service account, needed for password authentication | Default |
| [keystone_authtoken] project_name | project name of service account, needed for password authentication | service |
| [keystone_authtoken] project_domain_name | project domain name of service account, needed for password authentication | Default |
| [keystone_authtoken] auth_uri | complete public Identity API endpoint | http://$keystone_service_host/identity |
| [keystone_authtoken] cafile | A PEM encoded Certificate Authority to use when verifying HTTPs | /opt/stack/data/ca-bundle.pem |
| [keystone_authtoken] signing_dir | Directory used to cache files related to PKI tokens | /var/cache/tricircle |
| [keystone_authtoken] memcached_servers | Optionally specify a list of memcached server(s) to use for caching | $keystone_service_host:11211 |
| [client] auth_url | keystone authorization url | http://$keystone_service_host:5000/v3 |
| [client] identity_url | keystone service url | http://$keystone_service_host:35357/v3 |
| [client] auto_refresh_endpoint | if set to True, endpoint will be automatically refreshed if timeout accessing | True |
| [client] top_region_name | name of central region which client needs to access | CentralRegion |
| [client] admin_username | username of admin account | admin |
| [client] admin_password | password of admin account | password |
| [client] admin_tenant | project name of admin account | demo |
| [client] admin_user_domain_name | user domain name of admin account | Default |
| [client] admin_tenant_domain_name | project name of admin account | Default |
Note
The Tricircle utilizes the Oslo library to setup service, database, log and RPC, please refer to the configuration guide of the corresponding Oslo library if you need further configuration of these modules. Change keystone_service_host to the address of Keystone service.
5 Create the Tricircle database(take mysql as an example):
mysql -uroot -p -e "create database tricircle character set utf8;" cd tricircle tricircle-db-manage --config-file etc/api.conf db_sync
6 Start the Tricircle administrator API:
sudo mkdir /var/cache/tricircle sudo chown $(whoami) /var/cache/tricircle/ cd tricircle tricircle-api --config-file etc/api.conf
7 Configure the Tricircle Xjob daemon:
cd tricircle/etc cp xjob.conf.sample xjob.conf
Edit etc/xjob.conf, for detail configuration information, please refer to the configuration guide. Below only options necessary to be changed are listed.
| Option | Description | Example |
|---|---|---|
| [DEFAULT] tricircle_db_connection | database connection string for tricircle | mysql+pymysql://root:password@ 127.0.0.1/tricircle?charset=utf8 |
| [client] auth_url | keystone authorization url | http://$keystone_service_host:5000/v3 |
| [client] identity_url | keystone service url | http://$keystone_service_host:35357/v3 |
| [client] auto_refresh_endpoint | if set to True, endpoint will be automatically refreshed if timeout accessing | True |
| [client] top_region_name | name of central region which client needs to access | CentralRegion |
| [client] admin_username | username of admin account | admin |
| [client] admin_password | password of admin account | password |
| [client] admin_tenant | project name of admin account | demo |
| [client] admin_user_domain_name | user domain name of admin account | Default |
| [client] admin_tenant_domain_name | project name of admin account | Default |
Note
The Tricircle utilizes the Oslo library to setup service, database, log and RPC, please refer to the configuration guide of the corresponding Oslo library if you need further configuration of these modules. Change keystone_service_host to the address of Keystone service.
8 Start the Tricircle Xjob daemon:
cd tricircle tricircle-xjob --config-file etc/xjob.conf
9 Setup central Neutron server
In this guide we assume readers are familiar with how to install Neutron server, so we just briefly discuss the steps and extra configuration needed by central Neutron server. For detail information about the configuration options in “client” and “tricircle” groups, please refer to the configuration guide. Neutron server can be installed alone, or you can install a full OpenStack instance then remove or stop other services.
install Neutron package
configure central Neutron server
edit neutron.conf
Option Description Example [database] connection database connection string for central Neutron server mysql+pymysql://root:password@ 127.0.0.1/neutron?charset=utf8 [DEFAULT] bind_port Port central Neutron server binds to change to a different value rather than 9696 if you run central and local Neutron server in the same host [DEFAULT] core_plugin core plugin central Neutron server uses tricircle.network.central_plugin.TricirclePlugin [DEFAULT] service_plugins service plugin central Neutron server uses (leave empty) [DEFAULT] tricircle_db_connection database connection string for tricircle mysql+pymysql://root:password@ 127.0.0.1/tricircle?charset=utf8 [client] auth_url keystone authorization url http://$keystone_service_host:5000/v3 [client] identity_url keystone service url http://$keystone_service_host:35357/v3 [client] auto_refresh_endpoint if set to True, endpoint will be automatically refreshed if timeout accessing True [client] top_region_name name of central region which client needs to access CentralRegion [client] admin_username username of admin account admin [client] admin_password password of admin account password [client] admin_tenant project name of admin account demo [client] admin_user_domain_name user domain name of admin account Default [client] admin_tenant_domain_name project name of admin account Default [tricircle] type_drivers list of network type driver entry points to be loaded local,vlan,vxlan [tricircle] tenant_network_types ordered list of network_types to allocate as tenant networks local,vlan,vxlan [tricircle] network_vlan_ranges physical_network names and VLAN tags range usable of VLAN provider bridge:2001:3000 [tricircle] vni_ranges VxLAN VNI range 1001:2000 [tricircle] bridge_network_type l3 bridge network type which is enabled in tenant_network_types and is not local type vxlan [tricircle] default_region_for_external_network Default Region where the external network belongs to RegionOne [tricircle] enable_api_gateway whether the API gateway is enabled False Note
Change keystone_service_host to the address of Keystone service.
- create database for central Neutron server
- register central Neutron server endpoint in Keystone, central Neutron should be registered in the same region with the Tricircle
- start central Neutron server
Installation with Local Neutron Server¶
1 Install the Tricircle package:
git clone https://github.com/openstack/tricircle.git cd tricircle pip install -e .
2 Setup local Neutron server
In this guide we assume readers have already installed a complete OpenStack instance running services like Nova, Cinder, Neutron, etc, so we just discuss how to configure Neutron server to work with the Tricircle. For detail information about the configuration options in “client” and “tricircle” groups, please refer to the configuration guide. After the change, you just restart the Neutron server.
configure local Neutron server
edit neutron.conf.
Note
Pay attention to the service_plugins configuration item, make sure the plugin which is configured can support associating a floating ip to a port whose network is not directly attached to the router. TricircleL3Plugin is inherited from Neutron original L3RouterPlugin, and overrides the original “get_router_for_floatingip” implementation to allow associating a floating ip to a port whose network is not directly attached to the router. If you want to configure local Neutron to use original L3RouterPlugin, then you need to patch the function “get_router_for_floatingip” as what has been done in TricircleL3Plugin.
If only cross Neutron L2 networking is needed in the deployment, it’s not necessary to configure the service plugins.
Option Description Example [DEFAULT] core_plugin core plugin local Neutron server uses tricircle.network.local_plugin.TricirclePlugin [DEFAULT] service_plugins service plugins local Neutron server uses tricircle.network.local_l3_plugin.TricircleL3Plugin [client] auth_url keystone authorization url http://$keystone_service_host:5000/v3 [client] identity_url keystone service url http://$keystone_service_host:35357/v3 [client] auto_refresh_endpoint if set to True, endpoint will be automatically refreshed if timeout accessing True [client] top_region_name name of central region which client needs to access CentralRegion [client] admin_username username of admin account admin [client] admin_password password of admin account password [client] admin_tenant project name of admin account demo [client] admin_user_domain_name user domain name of admin account Default [client] admin_tenant_domain_name project name of admin account Default [tricircle] real_core_plugin the core plugin the Tricircle local plugin invokes neutron.plugins.ml2.plugin.Ml2Plugin [tricircle] central_neutron_url central Neutron server url http://$neutron_service_host:9696 Note
Change keystone_service_host to the address of Keystone service, and neutron_service_host to the address of central Neutron service.