ETSI NFV-SOL CNF (Containerized VNF) Deployment

This section covers how to deploy ETSI NFV-SOL containerized VNF in Tacker using Kubernetes VIM.

Overview

The following figure shows an overview of the CNF deployment.

  1. Request create VNF

    A user requests tacker-server to create a VNF with tacker-client by uploading a VNF Package and requesting create VNF. The VNF Package should contain CNF Definition in addition to VNFD. The detailed explanation of CNF Definition and VNFD can be found in 2. Create a Kubernetes Object File and 5. Create VNFD, respectively.

  2. Request instantiate VNF

    A user requests tacker-server to instantiate the created VNF by requesting instantiate VNF with instantiate parameters.

  3. Call Kubernetes API

    Upon receiving a request from tacker-client, tacker-server redirects it to tacker-conductor. In tacker-conductor, the request is redirected again to an appropriate infra-driver (in this case Kubernetes infra-driver) according to the contents of the instantiate parameters. Then, Kubernetes infra-driver calls Kubernetes APIs to create a Pod as a VNF.

  4. Create a Pod

    Kubernetes Master creates a Pod according to the API calls.

../_images/etsi_containerized_vnf_usage_guide.png

Prepare Kubernetes VIM

1. Create a Config File

Before register a Kubernetes VIM to tacker, we should create config file. The following vim-k8s.yaml file provides necessary information to register a Kubernetes VIM. This sample specifies the values of the bearer_token and ssl_ca_cert parameters that can be obtained from the Kubernetes Master-node. For specific methods of obtaining “bearer_token” and “ssl_ca_cert”, please refer to [1].

$ cat vim-k8s.yaml
auth_url: "https://192.168.33.100:6443"
project_name: "default"
bearer_token: "eyJhbGciOiJSUzI1NiIsImtpZCI6IlBRVDgxQkV5VDNVR1M1WGEwUFYxSXFkZFhJWDYzNklvMEp2WklLMnNFdk0ifQ.eyJpc3MiOiJrdWJlcm5ldGVzL3NlcnZpY2VhY2NvdW50Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9uYW1lc3BhY2UiOiJrdWJlLXN5c3RlbSIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VjcmV0Lm5hbWUiOiJhZG1pbi10b2tlbi12cnpoaiIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VydmljZS1hY2NvdW50Lm5hbWUiOiJhZG1pbiIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VydmljZS1hY2NvdW50LnVpZCI6ImNhY2VmMzEzLTMzYjYtNDQ5MS1iMWUyLTg0NmQ2N2E0OTdkNSIsInN1YiI6InN5c3RlbTpzZXJ2aWNlYWNjb3VudDprdWJlLXN5c3RlbTphZG1pbiJ9.R76VIWVZnQxa9NG02HIqux1xTJG4i7dkXsp52T4UU8bvNfsfi18kW_p3ZvaNTxw0yABBcmkYZoOBe4MNP5cTP6TtR_ERZoA5QCViasW_u36rSTBT0-MHRPbkXjJYetzYaFYUO-DlJd3194yOtVHtrxUd8D31qw0f1FlP8BHxblDjZkYlgYSjHCxcwEdwlnYaa0SiH2kl6_oCBRFg8cUfXDeTOmH9XEfdrJ6ubJ4OyqG6YjfiKDDiEHgIehy7s7vZGVwVIPy6EhT1YSOIhY5aF-G9nQSg-GK1V9LIq7petFoW_MIEt0yfNQVXy2D1tBhdJEa1bgtVsLmdlrNVf-m3uA"
ssl_ca_cert: "-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----"
type: "kubernetes"

2. Register Kubernetes VIM

We could register Kubernetes VIM to tacker by running the following command:

$ openstack vim register --config-file CONFIG_FILE KUBERNETES_VIM_NAME --fit-width

Config file in chapter 1 need to be input by parameter –config-file. After successful execution, VIM information will be displayed. For example, id. We can also use authentication methods such as username and password to register Kubernetes VIM. For details, please refer to the hyperlink in the [1. Create a config file] chapter.

$ openstack vim register --config-file vim-k8s.yaml test-vim-k8s --fit-width
+----------------+-----------------------------------------------------------------------------------------------------------------+
| Field          | Value                                                                                                           |
+----------------+-----------------------------------------------------------------------------------------------------------------+
| auth_cred      | {                                                                                                               |
|                |     "bearer_token": "***",                                                                                      |
|                |     "ssl_ca_cert": "b'gAAAAABfknE_feCVMPWTYZsvrifP0C3j-OQAy17n1CQ8CuTNsg1zGdHKSGW-YmOtHaRvma3pib3gLPjYlrybWxm_W |
|                | IEtXedP1M11TJb1NbNJclbNgw8-anW3RTO3gahXNvt5yU6iD3XOnG_PtrXydDtcoVBqa3Ry4MhK3bbMMD92PN-                          |
|                | veqQV_pV2xza1WJdE8YhAWevsEWaQPaxjxDdS9PWGg-_n5DtVulCrxGJNmEIi8p8cqnFiFuC4I1b1I0MjDt5f5khE1uKtGvhqBf8RpWS_tvZUo4 |
|                | TCkeqCeh6TxU1q2xDLZM5T8wWXaHDviYt4qmUVQhPsEi2LoO4kipoR2j7cBfOtr6H82HRpaRyiMM46g6BubTylW-qFaxAmX6SuQzJhjwmXM-62r |
|                | w8pmUvpDO1RKkyGj76XjcsaDwNUkrl3IVFPVsJAaMgDX3-R4adDqmfVSzXRiA0aF91PAuiOlaAMQY8xFjRxqwZKkXq7rN9uKLo8lH0yBPhWgpq7 |
|                | 6kZpXprlGaHrgKRnswrnMbBqew3W0sTrTW1hm39-jcVrMomNcXLe0b3Ebru-VKfRloW1c6_jDHZ3lKUo6xNg_2Wy52mrryrRqK3xN9itAuXFM5P |
|                | Cm2bYXIyb4XfQGR4f6fuJU-6j_lEImjr9xY7bXylNDYKjt9c6AUJSPAxGCraPNrjNjmeXSbI3di_yfqzbzk78XaD4u7vcPNUyiWJj5jJB5tOWIZ |
|                | gnNPdB5mM4H0-sE2eCwDnrZDRqGCskLTnXHpssROZiZYXGkPaRFQS9XAnswL2oTP5I9kOdVlmI89c63bIJwtgPZmUnIdoy9VyDsACO7cf_b4lMr |
|                | kZYY1VmQRIhJ0pGY_CbZHrwP1V41g9xQAWDar-ezxFypI_lQqjlcaPA0W1ZDNmoJDVrGQJbqprRGW76JhU2qdZR_GRG-                    |
|                | DnyWPpmAHjIjtG_6d9d_CGtGs24UTL-Di2B2aLCVaHTGd6ugW7av15ymPgXsXaTox4NVBrU-4l4GgiUN9oE65NF3xfvZ3b2t_bTAxXgCd9gVMgm |
|                | NGyp8DbdgN9yUuLCBfA2x_KYIBDyQIQv0pevTDaDO3Mfntsq5_KQ0y4A07EKtXkQ7b4qbKoDpksKqlhLJmDm5qsjx3QcybaGXAJ8CTmg0F3vMV8 |
|                | _mOIkwgj1zegjyUhm0oO-MUr-abuuKg-prejLOzDQpNTYzEnmuvUY4_l4Y3zYm1OlkGoU2yzWOd8vTV7GW9IFSZ76RG9IrrsFLNEXdVlt5ASPaV |
|                | 1q5CUcsv8mttAEs9HaQe1hPM0Eyigd1xF4u3yPh--                                                                       |
|                | kYlMFNJkNS8m8vtjPMY7oBfVE0KCeIx7SldYTI_xHuadD6n6w0hBSzS4_F_MujKkysmxZ3rq3WOkDdDaNk80IaT1CfYjiSPpXVPqKgJAPK0ChB- |
|                | JGkN8vDQfkYLuxypOZBXJt3Q=='",                                                                                   |
|                |     "auth_url": "https://192.168.33.100:6443",                                                                  |
|                |     "username": "None",                                                                                         |
|                |     "key_type": "barbican_key",                                                                                 |
|                |     "secret_uuid": "***",                                                                                       |
|                |     "password": "***"                                                                                           |
|                | }                                                                                                               |
| auth_url       | https://192.168.33.100:6443                                                                                     |
| created_at     | 2020-10-19 08:08:12.116040                                                                                      |
| description    |                                                                                                                 |
| id             | 8d8373fe-6977-49ff-83ac-7756572ed186                                                                            |
| is_default     | False                                                                                                           |
| name           | test-vim-k8s                                                                                                    |
| placement_attr | {                                                                                                               |
|                |     "regions": [                                                                                                |
|                |         "default",                                                                                              |
|                |         "kube-node-lease",                                                                                      |
|                |         "kube-public",                                                                                          |
|                |         "kube-system"                                                                                           |
|                |     ]                                                                                                           |
|                | }                                                                                                               |
| project_id     | 2a505a8efb7a4569af73594bd9904834                                                                                |
| status         | PENDING                                                                                                         |
| type           | kubernetes                                                                                                      |
| updated_at     | None                                                                                                            |
| vim_project    | {                                                                                                               |
|                |     "name": "default"                                                                                           |
|                | }                                                                                                               |
+----------------+-----------------------------------------------------------------------------------------------------------------+

Also we can check if the status of VIM is REACHABLE by openstack vim list command.

$ openstack vim list
+--------------------------------------+----------------+----------------------------------+------------+------------+-----------+
| ID                                   | Name           | Tenant_id                        | Type       | Is Default | Status    |
+--------------------------------------+----------------+----------------------------------+------------+------------+-----------+
| 8d8373fe-6977-49ff-83ac-7756572ed186 | test-vim-k8s   | 2a505a8efb7a4569af73594bd9904834 | kubernetes | False      | REACHABLE |
+--------------------------------------+----------------+----------------------------------+------------+------------+-----------+

Prepare VNF Package

1. Create Directories of VNF Package

TOSCA YAML CSAR file is an archive file using the ZIP file format whose structure complies with the TOSCA Simple Profile YAML v1.2 Specification. Here is a sample of building a VNF Package CSAR directory:

$ mkdir -p deployment/{TOSCA-Metadata,Definitions,Files/kubernetes}

2. Create a Kubernetes Object File

A CSAR VNF package shall have a object file that defines Kubernetes resources to be deployed. The file name shall have an extension of “.yaml”. Different Kubernetes api resources can be created according to the content of different yaml files.

Note

Please refer to Kubernetes api resource [2] for an example yaml file of each resource.

For the types of resources that can be deployed in Victoria, please refer to following link Kubernetes resource kind support [3].

The following is a simple example of deployment resource.

$ cat ./deployment/Files/kubernetes/deployment.yaml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: curry-probe-test001
  namespace: default
spec:
  replicas: 1
  selector:
    matchLabels:
      selector: curry-probe-test001
  template:
    metadata:
      labels:
        selector: curry-probe-test001
        app: webserver
    spec:
      containers:
      - name: nginx-liveness-probe
        image: nginx
        imagePullPolicy: IfNotPresent
        ports:
        - containerPort: 80
          protocol: TCP
      - image: celebdor/kuryr-demo
        imagePullPolicy: IfNotPresent
        name: kuryr-demo-readiness-probe
        ports:
        - containerPort: 8080
          protocol: TCP

Note

metadata.name in this file should be the same as properties.name of the corresponding VDU in the deployment flavor definition file. For the example in this procedure, metadata.name is same as topology_template.node_templates.VDU1.properties.name in the helloworld3_df_simple.yaml file.

3. Create a TOSCA.meta File

The TOSCA.Meta file contains version information for the TOSCA.Meta file, CSAR, Definitions file, and artifact file. Name, content-Type, encryption method, and hash value of the Artifact file are required in the TOSCA.Meta file. Here is an example of a TOSCA.meta file:

$ cat ./deployment/TOSCA-Metadata/TOSCA.meta
TOSCA-Meta-File-Version: 1.0
Created-by: dummy_user
CSAR-Version: 1.1
Entry-Definitions: Definitions/helloworld3_top.vnfd.yaml

Name: Files/kubernetes/deployment.yaml
Content-Type: application/yaml
Algorithm: SHA-256
Hash: 6a40dfb06764394fb604ae807d1198bc2e2ee8aece3b9483dfde48e53f316a58

4. Download ETSI Definition File

Download official documents. ETSI GS NFV-SOL 001 [i.4] specifies the structure and format of the VNFD based on TOSCA specifications.

$ cd deployment/Definitions
$ wget https://forge.etsi.org/rep/nfv/SOL001/raw/v2.6.1/etsi_nfv_sol001_common_types.yaml
$ wget https://forge.etsi.org/rep/nfv/SOL001/raw/v2.6.1/etsi_nfv_sol001_vnfd_types.yaml

5. Create VNFD

How to create VNFD composed of plural deployment flavours is described in VNF Descriptor (VNFD) based on ETSI NFV-SOL001 [4].

VNFD will not contain any Kubernetes resource information such as VDU, Connection points, Virtual links because all required components of CNF will be specified in Kubernetes resource files.

Following is an example of a VNFD file includes the definition of VNF.

$ cat helloworld3_top.vnfd.yaml
tosca_definitions_version: tosca_simple_yaml_1_2

description: Sample VNF

imports:
  - etsi_nfv_sol001_common_types.yaml
  - etsi_nfv_sol001_vnfd_types.yaml
  - helloworld3_types.yaml
  - helloworld3_df_simple.yaml

topology_template:
  inputs:
    selected_flavour:
      type: string
      description: VNF deployment flavour selected by the consumer. It is provided in the API

  node_templates:
    VNF:
      type: company.provider.VNF
      properties:
        flavour_id: { get_input: selected_flavour }
        descriptor_id: b1bb0ce7-ebca-4fa7-95ed-4840d7000003
        provider: Company
        product_name: Sample VNF
        software_version: '1.0'
        descriptor_version: '1.0'
        vnfm_info:
          - Tacker
      requirements:
        #- virtual_link_external # mapped in lower-level templates
        #- virtual_link_internal # mapped in lower-level templates

The helloworld3_types.yaml file defines the parameter types and default values of the VNF.

$ cat helloworld3_types.yaml
tosca_definitions_version: tosca_simple_yaml_1_2

description: VNF type definition

imports:
  - etsi_nfv_sol001_common_types.yaml
  - etsi_nfv_sol001_vnfd_types.yaml

node_types:
  company.provider.VNF:
    derived_from: tosca.nodes.nfv.VNF
    properties:
      descriptor_id:
        type: string
        constraints: [ valid_values: [ b1bb0ce7-ebca-4fa7-95ed-4840d7000003 ] ]
        default: b1bb0ce7-ebca-4fa7-95ed-4840d7000003
      descriptor_version:
        type: string
        constraints: [ valid_values: [ '1.0' ] ]
        default: '1.0'
      provider:
        type: string
        constraints: [ valid_values: [ 'Company' ] ]
        default: 'Company'
      product_name:
        type: string
        constraints: [ valid_values: [ 'Sample VNF' ] ]
        default: 'Sample VNF'
      software_version:
        type: string
        constraints: [ valid_values: [ '1.0' ] ]
        default: '1.0'
      vnfm_info:
        type: list
        entry_schema:
          type: string
          constraints: [ valid_values: [ Tacker ] ]
        default: [ Tacker ]
      flavour_id:
        type: string
        constraints: [ valid_values: [ simple ] ]
        default: simple
      flavour_description:
        type: string
        default: "falvour"
    requirements:
      - virtual_link_external:
          capability: tosca.capabilities.nfv.VirtualLinkable
      - virtual_link_internal:
          capability: tosca.capabilities.nfv.VirtualLinkable

helloworld3_df_simple.yaml defines the parameter type of VNF input.

$ cat helloworld3_df_simple.yaml
tosca_definitions_version: tosca_simple_yaml_1_2

description: Simple deployment flavour for Sample VNF

imports:
  - etsi_nfv_sol001_common_types.yaml
  - etsi_nfv_sol001_vnfd_types.yaml
  - helloworld3_types.yaml

topology_template:
  inputs:
    descriptor_id:
      type: string
    descriptor_version:
      type: string
    provider:
      type: string
    product_name:
      type: string
    software_version:
      type: string
    vnfm_info:
      type: list
      entry_schema:
        type: string
    flavour_id:
      type: string
    flavour_description:
      type: string

  substitution_mappings:
    node_type: company.provider.VNF
    properties:
      flavour_id: simple
    requirements:
      virtual_link_external: []

  node_templates:
    VNF:
      type: company.provider.VNF
      properties:
        flavour_description: A simple flavour

    VDU1:
      type: tosca.nodes.nfv.Vdu.Compute
      properties:
        name: curry-probe-test001
        description: kubernetes controller resource as VDU
        vdu_profile:
          min_number_of_instances: 1
          max_number_of_instances: 3

  policies:
    - scaling_aspects:
        type: tosca.policies.nfv.ScalingAspects
        properties:
          aspects:
            vdu1_aspect:
              name: vdu1_aspect
              description: vdu1 scaling aspect
              max_scale_level: 2
              step_deltas:
                - delta_1

    - vdu1_initial_delta:
        type: tosca.policies.nfv.VduInitialDelta
        properties:
          initial_delta:
            number_of_instances: 1
        targets: [ VDU1 ]

    - vdu1_scaling_aspect_deltas:
        type: tosca.policies.nfv.VduScalingAspectDeltas
        properties:
          aspect: vdu1_aspect
          deltas:
            delta_1:
              number_of_instances: 1
        targets: [ VDU1 ]

    - instantiation_levels:
        type: tosca.policies.nfv.InstantiationLevels
        properties:
          levels:
            instantiation_level_1:
              description: Smallest size
              scale_info:
                vdu1_aspect:
                  scale_level: 0
            instantiation_level_2:
              description: Largest size
              scale_info:
                vdu1_aspect:
                  scale_level: 2
          default_level: instantiation_level_1

    - vdu1_instantiation_levels:
        type: tosca.policies.nfv.VduInstantiationLevels
        properties:
          levels:
            instantiation_level_1:
              number_of_instances: 1
            instantiation_level_2:
              number_of_instances: 3
        targets: [ VDU1 ]

Note

VDU1.properties.name should be same as metadata.name that defined in Kubernetes object file. Therefore, VDU1.properties.name should be followed naming rules of Kubernetes resource name. About detail of naming rules, please refer to Kubernetes document [5].

6. Compress VNF Package

CSAR Package should be compressed into a ZIP file for uploading. Following commands are an example of compressing a VNF Package:

$ cd -
$ cd ./deployment
$ zip deployment.zip -r Definitions/ Files/ TOSCA-Metadata/
$ ls deployment
deployment.zip    Definitions    Files    TOSCA-Metadata

Create and Upload VNF Package

We need to create an empty VNF package object in tacker and upload compressed VNF package created in previous section.

1. Create VNF Package

An empty vnf package could be created by command openstack vnf package create. After create a VNF Package successfully, some information including ID, Links, Onboarding State, Operational State, and Usage State will be returned. When the Onboarding State is CREATED, the Operational State is DISABLED, and the Usage State is NOT_IN_USE, indicate the creation is successful.

$ openstack vnf package create
+-------------------+-------------------------------------------------------------------------------------------------+
| Field             | Value                                                                                           |
+-------------------+-------------------------------------------------------------------------------------------------+
| ID                | 08d00a5c-e8aa-4219-9412-411458eaa7d2                                                            |
| Links             | {                                                                                               |
|                   |     "self": {                                                                                   |
|                   |         "href": "/vnfpkgm/v1/vnf_packages/08d00a5c-e8aa-4219-9412-411458eaa7d2"                 |
|                   |     },                                                                                          |
|                   |     "packageContent": {                                                                         |
|                   |         "href": "/vnfpkgm/v1/vnf_packages/08d00a5c-e8aa-4219-9412-411458eaa7d2/package_content" |
|                   |     }                                                                                           |
|                   | }                                                                                               |
| Onboarding State  | CREATED                                                                                         |
| Operational State | DISABLED                                                                                        |
| Usage State       | NOT_IN_USE                                                                                      |
| User Defined Data | {}                                                                                              |
+-------------------+-------------------------------------------------------------------------------------------------+

2. Upload VNF Package

Upload the VNF package created above in to the VNF Package by running the following command openstack vnf package upload –path <path of vnf package> <vnf package ID> Here is an example of upload VNF package:

$ openstack vnf package upload --path deployment.zip 08d00a5c-e8aa-4219-9412-411458eaa7d2
Upload request for VNF package 08d00a5c-e8aa-4219-9412-411458eaa7d2 has been accepted.

3. Check VNF Package Status

Check the VNF Package Status by openstack vnf package list command. Find the item which the id is same as the created vnf package id, when the Onboarding State is ONBOARDED, and the Operational State is ENABLED, and the Usage State is NOT_IN_USE, indicate the VNF Package is uploaded successfully.

$ openstack vnf package list
+--------------------------------------+------------------+------------------+-------------+-------------------+-------------------------------------------------------------------------------------------------+
| Id                                   | Vnf Product Name | Onboarding State | Usage State | Operational State | Links                                                                                           |
+--------------------------------------+------------------+------------------+-------------+-------------------+-------------------------------------------------------------------------------------------------+
| 08d00a5c-e8aa-4219-9412-411458eaa7d2 | Sample VNF       | ONBOARDED        | NOT_IN_USE  | ENABLED           | {                                                                                               |
|                                      |                  |                  |             |                   |     "self": {                                                                                   |
|                                      |                  |                  |             |                   |         "href": "/vnfpkgm/v1/vnf_packages/08d00a5c-e8aa-4219-9412-411458eaa7d2"                 |
|                                      |                  |                  |             |                   |     },                                                                                          |
|                                      |                  |                  |             |                   |     "packageContent": {                                                                         |
|                                      |                  |                  |             |                   |         "href": "/vnfpkgm/v1/vnf_packages/08d00a5c-e8aa-4219-9412-411458eaa7d2/package_content" |
|                                      |                  |                  |             |                   |     }                                                                                           |
|                                      |                  |                  |             |                   | }                                                                                               |
+--------------------------------------+------------------+------------------+-------------+-------------------+-------------------------------------------------------------------------------------------------+

Create VNF

1. Get VNFD ID

The VNFD ID of a uploaded vnf package could be found by openstack vnf package show <VNF package ID> command. Here is an example of checking VNFD-ID value:

$ openstack vnf package show 08d00a5c-e8aa-4219-9412-411458eaa7d2
+----------------------+------------------------------------------------------------------------------------------------------------------------------------------------+
| Field                | Value                                                                                                                                          |
+----------------------+------------------------------------------------------------------------------------------------------------------------------------------------+
| Additional Artifacts | [                                                                                                                                              |
|                      |     {                                                                                                                                          |
|                      |         "artifactPath": "Files/kubernetes/deployment.yaml",                                                                                    |
|                      |         "checksum": {                                                                                                                          |
|                      |             "algorithm": "SHA-256",                                                                                                            |
|                      |             "hash": "6a40dfb06764394fb604ae807d1198bc2e2ee8aece3b9483dfde48e53f316a58"                                                         |
|                      |         },                                                                                                                                     |
|                      |         "metadata": {}                                                                                                                         |
|                      |     }                                                                                                                                          |
|                      | ]                                                                                                                                              |
| Checksum             | {                                                                                                                                              |
|                      |     "algorithm": "sha512",                                                                                                                     |
|                      |     "hash": "f51de874f4dd831986aff19b4d74b8e30009681683ff2d25b2969a2c679ae3a78f6bd79cc131d00e92a5e264cd8df02e2decb8b3f2acc6e877161977cdbdd304" |
|                      | }                                                                                                                                              |
| ID                   | 08d00a5c-e8aa-4219-9412-411458eaa7d2                                                                                                           |
| Links                | {                                                                                                                                              |
|                      |     "self": {                                                                                                                                  |
|                      |         "href": "/vnfpkgm/v1/vnf_packages/08d00a5c-e8aa-4219-9412-411458eaa7d2"                                                                |
|                      |     },                                                                                                                                         |
|                      |     "packageContent": {                                                                                                                        |
|                      |         "href": "/vnfpkgm/v1/vnf_packages/08d00a5c-e8aa-4219-9412-411458eaa7d2/package_content"                                                |
|                      |     }                                                                                                                                          |
|                      | }                                                                                                                                              |
| Onboarding State     | ONBOARDED                                                                                                                                      |
| Operational State    | ENABLED                                                                                                                                        |
| Software Images      |                                                                                                                                                |
| Usage State          | NOT_IN_USE                                                                                                                                     |
| User Defined Data    | {}                                                                                                                                             |
| VNF Product Name     | Sample VNF                                                                                                                                     |
| VNF Provider         | Company                                                                                                                                        |
| VNF Software Version | 1.0                                                                                                                                            |
| VNFD ID              | b1bb0ce7-ebca-4fa7-95ed-4840d7000003                                                                                                           |
| VNFD Version         | 1.0                                                                                                                                            |
+----------------------+------------------------------------------------------------------------------------------------------------------------------------------------+

2. Execute Create VNF Command

We could create VNF by running openstack vnflcm create <VNFD ID>. After the command is executed, the generated ID is VNF instance ID.

$ openstack vnflcm create b1bb0ce7-ebca-4fa7-95ed-4840d7000003
+--------------------------+---------------------------------------------------------------------------------------------+
| Field                    | Value                                                                                       |
+--------------------------+---------------------------------------------------------------------------------------------+
| ID                       | 92cf0ccb-e575-46e2-9c0d-30c67e75aaf6                                                        |
| Instantiation State      | NOT_INSTANTIATED                                                                            |
| Links                    | {                                                                                           |
|                          |     "self": {                                                                               |
|                          |         "href": "/vnflcm/v1/vnf_instances/92cf0ccb-e575-46e2-9c0d-30c67e75aaf6"             |
|                          |     },                                                                                      |
|                          |     "instantiate": {                                                                        |
|                          |         "href": "/vnflcm/v1/vnf_instances/92cf0ccb-e575-46e2-9c0d-30c67e75aaf6/instantiate" |
|                          |     }                                                                                       |
|                          | }                                                                                           |
| VNF Instance Description | None                                                                                        |
| VNF Instance Name        | None                                                                                        |
| VNF Product Name         | Sample VNF                                                                                  |
| VNF Provider             | Company                                                                                     |
| VNF Software Version     | 1.0                                                                                         |
| VNFD ID                  | b1bb0ce7-ebca-4fa7-95ed-4840d7000003                                                        |
| VNFD Version             | 1.0                                                                                         |
+--------------------------+---------------------------------------------------------------------------------------------+

Instantiate VNF

1. Set the Value to the Request Parameter File

Get the ID of target VIM.

$ openstack vim list
+--------------------------------------+----------------+----------------------------------+------------+------------+-----------+
| ID                                   | Name           | Tenant_id                        | Type       | Is Default | Status    |
+--------------------------------------+----------------+----------------------------------+------------+------------+-----------+
| 8d8373fe-6977-49ff-83ac-7756572ed186 | test-vim-k8s   | 2a505a8efb7a4569af73594bd9904834 | kubernetes | False      | REACHABLE |
+--------------------------------------+----------------+----------------------------------+------------+------------+-----------+

A json file includes path of Kubernetes resource definition file and Kubernetes VIM information should be provided while instantiating a containerized VNF. Here is an example of json file:

additionalParams includes path of Kubernetes resource definition file, notice that lcm-kubernetes-def-files should be a list. The vimConnectionInfo includes id whose value can be defined autonomously, vimId and vimType.

$ cat ./instance_kubernetes.json
{
  "flavourId": "simple",
  "additionalParams": {
    "lcm-kubernetes-def-files": [
      "Files/kubernetes/deployment.yaml"
    ]
  },
  "vimConnectionInfo": [
    {
      "id": "8a3adb69-0784-43c7-833e-aab0b6ab4470",
      "vimId": "8d8373fe-6977-49ff-83ac-7756572ed186",
      "vimType": "kubernetes"
    }
  ]
}

2. Execute the Instantiation Command

Run openstack vnflcm instantiate <VNF instance ID> <json file> to instantiate a VNF.

The VNF instance ID is the ID generated after the openstack vnflcm create command is executed. We can find it in the [2. Execute Create VNF command] chapter.

$ openstack vnflcm instantiate 92cf0ccb-e575-46e2-9c0d-30c67e75aaf6 instance_kubernetes.json
Instantiate request for VNF Instance 92cf0ccb-e575-46e2-9c0d-30c67e75aaf6 has been accepted.

3. Check the Instantiation State

We could check the Instantiation State by running the following command. When the Instantiation State is INSTANTIATED, indicate the instantiation is successful.

$ openstack vnflcm show 92cf0ccb-e575-46e2-9c0d-30c67e75aaf6
+--------------------------+-------------------------------------------------------------------------------------------+
| Field                    | Value                                                                                     |
+--------------------------+-------------------------------------------------------------------------------------------+
| ID                       | 92cf0ccb-e575-46e2-9c0d-30c67e75aaf6                                                      |
| Instantiated Vnf Info    | {                                                                                         |
|                          |     "flavourId": "simple",                                                                |
|                          |     "vnfState": "STARTED",                                                                |
|                          |     "scaleStatus": [                                                                      |
|                          |         {                                                                                 |
|                          |             "aspectId": "vdu1_aspect",                                                    |
|                          |             "scaleLevel": 0                                                               |
|                          |         }                                                                                 |
|                          |     ],                                                                                    |
|                          |     "extCpInfo": [],                                                                      |
|                          |     "vnfcResourceInfo": [                                                                 |
|                          |         {                                                                                 |
|                          |             "id": "686b356f-8096-4e24-99e5-3c81d36341be",                                 |
|                          |             "vduId": "VDU1",                                                              |
|                          |             "computeResource": {                                                          |
|                          |                 "vimConnectionId": null,                                                  |
|                          |                 "resourceId": "curry-probe-test001-766bdd79bf-wgc7m",                     |
|                          |                 "vimLevelResourceType": "Deployment"                                      |
|                          |             },                                                                            |
|                          |             "storageResourceIds": []                                                      |
|                          |         }                                                                                 |
|                          |     ],                                                                                    |
|                          |     "additionalParams": {}                                                                |
|                          | }                                                                                         |
| Instantiation State      | INSTANTIATED                                                                              |
| Links                    | {                                                                                         |
|                          |     "self": {                                                                             |
|                          |         "href": "/vnflcm/v1/vnf_instances/92cf0ccb-e575-46e2-9c0d-30c67e75aaf6"           |
|                          |     },                                                                                    |
|                          |     "terminate": {                                                                        |
|                          |         "href": "/vnflcm/v1/vnf_instances/92cf0ccb-e575-46e2-9c0d-30c67e75aaf6/terminate" |
|                          |     },                                                                                    |
|                          |     "heal": {                                                                             |
|                          |         "href": "/vnflcm/v1/vnf_instances/92cf0ccb-e575-46e2-9c0d-30c67e75aaf6/heal"      |
|                          |     }                                                                                     |
|                          | }                                                                                         |
| VIM Connection Info      | [                                                                                         |
|                          |     {                                                                                     |
|                          |         "id": "8a3adb69-0784-43c7-833e-aab0b6ab4470",                                     |
|                          |         "vimId": "8d8373fe-6977-49ff-83ac-7756572ed186",                                  |
|                          |         "vimType": "kubernetes",                                                          |
|                          |         "interfaceInfo": {},                                                              |
|                          |         "accessInfo": {}                                                                  |
|                          |     }                                                                                     |
|                          | ]                                                                                         |
| VNF Instance Description | None                                                                                      |
| VNF Instance Name        | None                                                                                      |
| VNF Product Name         | Sample VNF                                                                                |
| VNF Provider             | Company                                                                                   |
| VNF Software Version     | 1.0                                                                                       |
| VNFD ID                  | b1bb0ce7-ebca-4fa7-95ed-4840d7000003                                                      |
| VNFD Version             | 1.0                                                                                       |
+--------------------------+-------------------------------------------------------------------------------------------+

4. Check the Deployment in Kubernetes

To test a containerized VNF is running in target Kubernetes VIM environment, we can check by running the following command. When the READY is 1/1, indicate the deployment is created successfully.

$ kubectl get deploy
NAME                  READY   UP-TO-DATE   AVAILABLE   AGE
curry-probe-test001   1/1     1            1           8m43s

References