BMP

BGP Monitoring Protocol draft-ietf-grow-bmp-07

class os_ken.lib.packet.bmp.BMPInitiation(info, type_=4, len_=None, version=3)

BMP Initiation Message

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
info	One or more piece of information encoded as a TLV

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

class os_ken.lib.packet.bmp.BMPMessage(type_, len_=None, version=3)

Base class for BGP Monitoring Protocol messages.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

serialize()

Encode a protocol header.

This method is used only when encoding a packet.

Encode a protocol header. Returns a bytearray which contains the header.

payload is the rest of the packet which will immediately follow this header.

prev is a packet_base.PacketBase subclass for the outer protocol header. prev is None if the current header is the outer-most. For example, prev is ipv4 or ipv6 for tcp.serialize.

class os_ken.lib.packet.bmp.BMPPeerDownNotification(reason, data, peer_type, is_post_policy, peer_distinguisher, peer_address, peer_as, peer_bgp_id, timestamp, version=3, type_=2, len_=None, is_adj_rib_out=False)

BMP Peer Down Notification Message

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
reason	Reason indicates why the session was closed.
data	vary by the reason.

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

class os_ken.lib.packet.bmp.BMPPeerMessage(peer_type, is_post_policy, peer_distinguisher, peer_address, peer_as, peer_bgp_id, timestamp, version=3, type_=None, len_=None, is_adj_rib_out=False)

BMP Message with Per Peer Header

Following BMP Messages contain Per Peer Header after Common BMP Header.

• BMP_MSG_TYPE_ROUTE_MONITRING

• BMP_MSG_TYPE_STATISTICS_REPORT

• BMP_MSG_PEER_UP_NOTIFICATION

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
peer_type	The type of the peer.
is_post_policy	Indicate the message reflects the post-policy
is_adj_rib_out	Indicate the message reflects Adj-RIB-Out (defaults to Adj-RIB-In)
peer_distinguisher	Use for L3VPN router which can have multiple instance.
peer_address	The remote IP address associated with the TCP session.
peer_as	The Autonomous System number of the peer.
peer_bgp_id	The BGP Identifier of the peer
timestamp	The time when the encapsulated routes were received.

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

class os_ken.lib.packet.bmp.BMPPeerUpNotification(local_address, local_port, remote_port, sent_open_message, received_open_message, peer_type, is_post_policy, peer_distinguisher, peer_address, peer_as, peer_bgp_id, timestamp, version=3, type_=3, len_=None, is_adj_rib_out=False)

BMP Peer Up Notification Message

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
peer_type	The type of the peer.
peer_flags	Provide more information about the peer.
peer_distinguisher	Use for L3VPN router which can have multiple instance.
peer_address	The remote IP address associated with the TCP session.
peer_as	The Autonomous System number of the peer.
peer_bgp_id	The BGP Identifier of the peer
timestamp	The time when the encapsulated routes were received.
local_address	The local IP address associated with the peering TCP session.
local_port	The local port number associated with the peering TCP session.
remote_port	The remote port number associated with the peering TCP session.
sent_open_message	The full OPEN message transmitted by the monitored router to its peer.
received_open_message	The full OPEN message received by the monitored router from its peer.

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

class os_ken.lib.packet.bmp.BMPRouteMonitoring(bgp_update, peer_type, is_post_policy, peer_distinguisher, peer_address, peer_as, peer_bgp_id, timestamp, version=3, type_=0, len_=None, is_adj_rib_out=False)

BMP Route Monitoring Message

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
peer_type	The type of the peer.
peer_flags	Provide more information about the peer.
peer_distinguisher	Use for L3VPN router which can have multiple instance.
peer_address	The remote IP address associated with the TCP session.
peer_as	The Autonomous System number of the peer.
peer_bgp_id	The BGP Identifier of the peer
timestamp	The time when the encapsulated routes were received.
bgp_update	BGP Update PDU

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

class os_ken.lib.packet.bmp.BMPStatisticsReport(stats, peer_type, is_post_policy, peer_distinguisher, peer_address, peer_as, peer_bgp_id, timestamp, version=3, type_=1, len_=None, is_adj_rib_out=False)

BMP Statistics Report Message

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
peer_type	The type of the peer.
peer_flags	Provide more information about the peer.
peer_distinguisher	Use for L3VPN router which can have multiple instance.
peer_address	The remote IP address associated with the TCP session.
peer_as	The Autonomous System number of the peer.
peer_bgp_id	The BGP Identifier of the peer
timestamp	The time when the encapsulated routes were received.
stats	Statistics (one or more stats encoded as a TLV)

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

class os_ken.lib.packet.bmp.BMPTermination(info, type_=5, len_=None, version=3)

BMP Termination Message

Attribute	Description
version	Version. this packet lib defines BMP ver. 3
len	Length field. Ignored when encoding.
type	Type field. one of BMP_MSG_ constants.
info	One or more piece of information encoded as a TLV

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.