Scenario - Using Open vSwitch

Overview

Operators can choose to utilize Open vSwitch instead of Linux Bridges for the neutron ML2 agent. This offers different capabilities and integration points with neutron. This document outlines how to set it up in your environment.

Prerequisites

All compute nodes must have bridges configured:

  • br-mgmt

  • br-vlan (optional - used for vlan networks)

  • br-vxlan (optional - used for vxlan tenant networks)

  • br-storage (optional - used for certain storage devices)

For more information see: https://docs.openstack.org/project-deploy-guide/openstack-ansible/newton/targethosts-networkconfig.html

These bridges may be configured as either a Linux Bridge (which would connect to the Open vSwitch controlled by neutron) or as an Open vSwitch.

Configuring bridges (Linux Bridge)

The following is an example of how to configure a bridge (example: br-mgmt) with a Linux Bridge on Ubuntu 16.04 LTS:

/etc/network/interfaces

auto lo
iface lo inet loopback

# Management network
auto eth0
iface eth0 inet manual

# VLAN network
auto eth1
iface eth1 inet manual

source /etc/network/interfaces.d/*.cfg

/etc/network/interfaces.d/br-mgmt.cfg

# OpenStack Management network bridge
auto br-mgmt
iface br-mgmt inet static
  bridge_stp off
  bridge_waitport 0
  bridge_fd 0
  bridge_ports eth0
  address MANAGEMENT_NETWORK_IP
  netmask 255.255.255.0

One br-<type>.cfg is required for each bridge. VLAN interfaces can be used to back the br-<type> bridges if there are limited physical adapters on the system.

Configuring bridges (Open vSwitch)

Another configuration method routes everything with Open vSwitch. The bridge (example: br-mgmt) can be an Open vSwitch itself.

The following is an example of how to configure a bridge (example: br-mgmt) with Open vSwitch on Ubuntu 16.04 LTS: *

/etc/network/interfaces

auto lo
iface lo inet loopback

source /etc/network/interfaces.d/*.cfg

# Management network
allow-br-mgmt eth0
iface eth0 inet manual
  ovs_bridge br-mgmt
  ovs_type OVSPort

# VLAN network
allow-br-vlan eth1
iface eth1 inet manual
  ovs_bridge br-vlan
  ovs_type OVSPort

/etc/network/interfaces.d/br-mgmt.cfg

# OpenStack Management network bridge
auto br-mgmt
allow-ovs br-mgmt
iface br-mgmt inet static
  address MANAGEMENT_NETWORK_IP
  netmask 255.255.255.0
  ovs_type OVSBridge
  ovs_ports eth0

One br-<type>.cfg is required for each bridge. VLAN interfaces can be used to back the br-<type> bridges if there are limited physical adapters on the system.

Warning: There is a bug in Ubuntu 16.04 LTS where the Open vSwitch service won’t start properly when using systemd. The bug and workaround are discussed here: http://www.opencloudblog.com/?p=240

OpenStack-Ansible user variables

Create a group var file for your network hosts /etc/openstack_deploy/group_vars/network_hosts. It has to include:

# Ensure the openvswitch kernel module is loaded
openstack_host_specific_kernel_modules:
  - name: "openvswitch"
    pattern: "CONFIG_OPENVSWITCH"

Specify provider network definitions in your /etc/openstack_deploy/openstack_user_config.yml that define one or more Neutron provider bridges and related configuration:

Note

Bridges specified here will be created automatically. If network_interface is defined, the interface will be placed into the bridge automatically.

- network:
    container_bridge: "br-provider"
    container_type: "veth"
    type: "vlan"
    range: "101:200,301:400"
    net_name: "physnet1"
    network_interface: "bond1"
    group_binds:
      - neutron_openvswitch_agent
- network:
    container_bridge: "br-provider2"
    container_type: "veth"
    type: "vlan"
    range: "203:203,467:500"
    net_name: "physnet2"
    network_interface: "bond2"
    group_binds:
      - neutron_openvswitch_agent

When using flat provider networks, modify the network type accordingly:

- network:
    container_bridge: "br-publicnet"
    container_type: "veth"
    type: "flat"
    net_name: "flat"
    group_binds:
      - neutron_openvswitch_agent

Specify an overlay network definition in your /etc/openstack_deploy/openstack_user_config.yml that defines overlay network-related configuration:

Note

The bridge name should correspond to a pre-created Linux bridge or OVS bridge.

- network:
    container_bridge: "br-vxlan"
    container_type: "veth"
    container_interface: "eth10"
    ip_from_q: "tunnel"
    type: "vxlan"
    range: "1:1000"
    net_name: "vxlan"
    group_binds:
      - neutron_openvswitch_agent

Set the following user variables in your /etc/openstack_deploy/user_variables.yml:

neutron_plugin_type: ml2.ovs

neutron_ml2_drivers_type: "flat,vlan,vxlan"

The overrides are instructing Ansible to deploy the OVS mechanism driver and associated OVS components. This is done by setting neutron_plugin_type to ml2.ovs.

The neutron_ml2_drivers_type override provides support for all common type drivers supported by OVS.

If provider network overrides are needed on a global or per-host basis, the following format can be used in user_variables.yml or per-host in openstack_user_config.yml.

Note

These overrides are not normally required when defining global provider networks in the openstack_user_config.yml file.

# When configuring Neutron to support vxlan tenant networks and
# vlan provider networks the configuration may resemble the following:
neutron_provider_networks:
  network_types: "vxlan"
  network_vxlan_ranges: "1:1000"
  network_vlan_ranges: "physnet1:102:199"
  network_mappings: "physnet1:br-provider"
  network_interface_mappings: "br-provider:bond1"

# When configuring Neutron to support only vlan tenant networks and
# vlan provider networks the configuration may resemble the following:
neutron_provider_networks:
  network_types: "vlan"
  network_vlan_ranges: "physnet1:102:199"
  network_mappings: "physnet1:br-provider"
  network_interface_mappings: "br-provider:bond1"

# When configuring Neutron to support multiple vlan provider networks
# the configuration may resemble the following:
neutron_provider_networks:
  network_types: "vlan"
  network_vlan_ranges: "physnet1:102:199,physnet2:2000:2999"
  network_mappings: "physnet1:br-provider,physnet2:br-provider2"
  network_interface_mappings: "br-provider:bond1,br-provider2:bond2"

# When configuring Neutron to support multiple vlan and flat provider
# networks the configuration may resemble the following:
neutron_provider_networks:
  network_flat_networks: "*"
  network_types: "vlan"
  network_vlan_ranges: "physnet1:102:199,physnet2:2000:2999"
  network_mappings: "physnet1:br-provider,physnet2:br-provider2"
  network_interface_mappings: "br-provider:bond1,br-provider2:bond2"

Open Virtual Switch (OVS) commands

The following commands can be used to provide useful information about the state of Open vSwitch networking and configurations.

The ovs-vsctl show command provides information about the virtual switches and connected ports currently configured on the host:

root@infra01:~# ovs-vsctl show
4ef304ff-b803-4d09-95f5-59a076323949
    Manager "ptcp:6640:127.0.0.1"
        is_connected: true
    Bridge br-int
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port "tap2e7e0507-e4"
            tag: 2
            Interface "tap2e7e0507-e4"
                type: internal
        Port int-br-vlan
            Interface int-br-vlan
                type: patch
                options: {peer=phy-br-provider}
        Port br-int
            Interface br-int
                type: internal
        Port "tap7796ab3d-e9"
            tag: 5
            Interface "tap7796ab3d-e9"
                type: internal
        Port patch-tun
            Interface patch-tun
                type: patch
                options: {peer=patch-int}
    Bridge br-tun
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port "vxlan-ac1df015"
            Interface "vxlan-ac1df015"
                type: vxlan
                options: {df_default="true", in_key=flow, local_ip="172.29.240.20", out_key=flow, remote_ip="172.29.240.21"}
        Port patch-int
            Interface patch-int
                type: patch
                options: {peer=patch-tun}
        Port "vxlan-ac1df017"
            Interface "vxlan-ac1df017"
                type: vxlan
                options: {df_default="true", in_key=flow, local_ip="172.29.240.20", out_key=flow, remote_ip="172.29.240.23"}
        Port br-tun
            Interface br-tun
                type: internal
    Bridge br-provider
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port "ens192"
            Interface "ens192"
        Port br-provider
            Interface br-provider
                type: internal
        Port phy-br-provider
            Interface phy-br-provider
                type: patch
                options: {peer=int-br-provider}
    ovs_version: "2.10.0"

Additional commands can be found in upstream Open vSwitch documentation.

Notes

The neutron-openvswitch-agent service will check in as an agent and can be observed using the openstack network agent list command:

root@infra01-utility-container-ce1509fd:~# openstack network agent list --agent-type open-vswitch
+--------------------------------------+--------------------+-------------+-------------------+-------+-------+---------------------------+
| ID                                   | Agent Type         | Host        | Availability Zone | Alive | State | Binary                    |
+--------------------------------------+--------------------+-------------+-------------------+-------+-------+---------------------------+
| 4dcef710-ec0c-4925-a940-dc319cd6849f | Open vSwitch agent | compute03   | None              | :-)   | UP    | neutron-openvswitch-agent |
| 5e1f8670-b90e-49c3-84ff-e981aeccb171 | Open vSwitch agent | compute02   | None              | :-)   | UP    | neutron-openvswitch-agent |
| 78746672-d77a-4d8a-bb48-f659251fa246 | Open vSwitch agent | compute01   | None              | :-)   | UP    | neutron-openvswitch-agent |
| eebab5da-3ef5-4582-84c5-f29e2472a44a | Open vSwitch agent | infra01     | None              | :-)   | UP    | neutron-openvswitch-agent |
+--------------------------------------+--------------------+-------------+-------------------+-------+-------+---------------------------+