Scenario - Using the PLUMgrid Neutron plugin

Scenario - Using the PLUMgrid Neutron plugin

Installing source and host networking

  1. Clone the PLUMgrid Ansible repository in the /opt/ directory:

    # git clone -b TAG \
    https://github.com/plumgrid/plumgrid-ansible.git \
    /opt/plumgrid-ansible
    

    Replace ``TAG`` with the current stable release tag.

  2. PLUMgrid controls networking for the entire cluster. The bridges br-vxlan and br-vlan are present to prevent relevant containers from exiting with errors on infra hosts. They do not need to be attached to any host interface or a valid network.

  3. PLUMgrid requires two networks: a Management and a Fabric network. The Management network is typically shared through the standard br-mgmt bridge and the Fabric network must be specified in the PLUMgrid configuration file as described below. The Fabric interface must be untagged and unbridged.

Neutron configuration

To set up the neutron configuration to install PLUMgrid as the core neutron plugin, create a userspace variable file named /etc/openstack_deploy/user_pg_neutron.yml and insert the following parameters:

  1. Set the neutron_plugin_type parameter to plumgrid:

    # Neutron Plugins
    neutron_plugin_type: plumgrid
    
  2. In the same file, disable the installation of unnecessary neutron-agents in the neutron_services dictionary by setting their service_en parameters to False:

    neutron_metering: False
    neutron_l3: False
    neutron_lbaas: False
    neutron_lbaasv2: False
    neutron_vpnaas: False
    

PLUMgrid configuration

On the deployment host, create a PLUMgrid user variables file using the sample in /opt/plumgrid-ansible/etc/user_pg_vars.yml.example. Copy that file to /etc/openstack_deploy/user_pg_vars.yml. You must configure the following parameters:

  1. Replace PG_REPO_HOST with a valid repository URL hosting PLUMgrid packages:

    plumgrid_repo: PG_REPO_HOST
    
  2. Replace INFRA_IPs with comma-separated Infrastructure Node IPs and PG_VIP with an unallocated IP on the management network. This IP is used to access the PLUMgrid UI:

    plumgrid_ip: INFRA_IPs
    pg_vip: PG_VIP
    
  3. Replace FABRIC_IFC with the name of the interface to be used for PLUMgrid Fabric:

    Note

    PLUMgrid Fabric must be an untagged unbridged raw interface such as eth0.

    fabric_interface: FABRIC_IFC
    
  4. Fill in the fabric_ifc_override and mgmt_override dicts with node hostname: interface_name to override the default interface names.

  5. Obtain a PLUMgrid License file, rename to pg_license and place it under /var/lib/plumgrid/pg_license on the deployment host.

Gateway hosts

PLUMgrid-enabled OpenStack clusters contain one or more gateway nodes used for providing connectivity with external resources, such as external networks, bare-metal servers, or network service appliances. In addition to the Management and Fabric networks required by PLUMgrid nodes, gateways require dedicated external interfaces referred to as gateway_devs in the configuration files.

  1. Add a gateway_hosts section to /etc/openstack_deploy/openstack_user_config.yml:

    gateway_hosts:
      gateway1:
        ip: GW01_IP_ADDRESS
      gateway2:
        ip: GW02_IP_ADDRESS
    

    Replace *_IP_ADDRESS with the IP address of the br-mgmt container management bridge on each Gateway host.

  2. Add a gateway_hosts section to the end of the PLUMgrid user_pg_vars.yml file:

    Note

    This section must contain the hostnames and gateway_dev names for each gateway in the cluster.

    gateway_hosts:
     - hostname: gateway1
       gateway_devs:
       - eth3
       - eth4
    

Installation

  1. Run the PLUMgrid playbooks before running the openstack-setup.yml playbook:

    # cd /opt/plumgrid-ansible/plumgrid_playbooks
    # openstack-ansible plumgrid_all.yml
    

Note

Contact PLUMgrid at info@plumgrid.com for an Installation Pack. This pack includes a full trial commercial license, packages, deployment documentation, and automation scripts for the entire work flow.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.