.. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. =============================== Placement API Developer Notes =============================== Overview ======== The Nova project introduced the :doc:`placment service ` as part of the Newton release. The service provides an HTTP API to manage inventories of different classes of resources, such as disk or virtual cpus, made available by entities called resource providers. Information provided through the placement API is intended to enable more effective accounting of resources in an OpenStack deployment and better scheduling of various entities in the cloud. The document serves to explain the architecture of the system and to provide some guidance on how to maintain and extend the code. For more detail on why the system was created and how it does its job see :doc:`placement`. Big Picture =========== The placement service is straightforward: It is a `WSGI`_ application that sends and receives JSON, using an RDBMS (usually MySQL) for persistence. As state is managed solely in the DB, scaling the placement service is done by increasing the number of WSGI application instances and scaling the RDBMS using traditional database scaling techniques. For sake of consistency and because there was initially intent to make the entities in the placement service available over RPC, `versioned objects`_ are used to provide the interface between the HTTP application layer and the SQLAlchemy-driven persistence layer. Even without RPC, these objects provide useful structuring and separation of the code. Though the placement service doesn't aspire to be a `microservice` it does aspire to continue to be small and minimally complex. This means a relatively small amount of middleware that is not configurable, and a limited number of exposed resources where any given resource is represented by one (and only one) URL that expresses a noun that is a member of the system. Adding additional resources should be considered a significant change requiring robust review from many stakeholders. The set of HTTP resources represents a concise and constrained grammar for expressing the management of resource providers, inventories, resource classes and allocations. If a solution is initially designed to need more resources or a more complex grammar that may be a sign that we need to give our goals greater scrutiny. Is there a way to do what we want with what we have already? Can some other service help? Is a new collaborating service required? Minimal Framework ================= The API is set up to use a minimal framework that tries to keep the structure of the application as discoverable as possible and keeps the HTTP interaction near the surface. The goal of this is to make things easy to trace when debugging or adding functionality. Functionality which is required for every request is handled in raw WSGI middleware that is composed in the `nova.api.openstack.placement.deploy` module. Dispatch or routing is handled declaratively via the ``ROUTE_DECLARATIONS`` map defined in the `nova.api.openstack.placement.handler` module. Mapping is by URL plus request method. The destination is a complete WSGI application, using the `wsgify`_ method from `WebOb`_ to provide a `Request`_ object that provides convenience methods for accessing request headers, bodies, and query parameters and for generating responses. In the placement API these mini-applications are called `handlers`. This division between middleware, dispatch and handlers is supposed to provide clues on where a particular behavior or functionality should be implemented. Like most such systems, this doesn't always work but is a useful tool. Gotchas ======= This section tries to shed some light on some of the differences between the placement API and some of the nova APIs or on situations which may be surprising or unexpected. * The placement API is somewhat more strict about `Content-Type` and `Accept` headers in an effort to follow the HTTP RFCs. If a user-agent sends some JSON in a `PUT` or `POST` request without a `Content-Type` of `application/json` the request will result in an error. If a `GET` request is made without an `Accept` header, the response will default to being `application/json`. If a request is made with an explicit `Accept` header that does not include `application/json` then there will be an error and the error will attempt to be in the requested format (for example, `text/plain`). * If a URL exists, but a request is made using a method that that URL does not support, the API will respond with a `405` error. Sometimes in the nova APIs this can be a `404` (which is wrong, but understandable given the constraints of the code). * Because each handler is individually wrapped by the `wsgify`_ decorator any exception that is a subclass of `webob.exc.WSGIHTTPException` that is raised from within the handler, such as `webob.exc.HTTPBadRequest`, will be caught by WebOb and turned into a valid `Response`_ containing headers and body set by WebOb based on the information given when the exception was raised. It will not be seen as an exception by any of the middleware in the placement stack. In general this is a good thing, but it can lead to some confusion if, for example, you are trying to add some middleware that operates on exceptions. Other exceptions that are not from `WebOb`_ will raise outside the handlers where they will either be caught in the `__call__` method of the `PlacementHandler` app that is responsible for dispatch, or by the `FaultWrap` middleware. Microversions ============= The placement API makes use of `microversions`_ to allow the release of new features on an opt in basis. See :doc:`placement` for an up to date history of the available microversions. The rules around `when a microversion is needed`_ are the same as for the compute API. When adding a new microversion there are a few bits of required housekeeping that must be done in the code: * Update the ``VERSIONS`` list in `nova.api.openstack.placement.microversion` to indicate the new microversion and give a very brief summary of the added feature. * Update `nova/api/openstack/placement/rest_api_version_history.rst` to add a more detailed section describing the new microversion. * Add a `release note`_ announcing the new or changed feature and the microversion. * If the ``version_handler`` decorator (see below) has been used, increment ``TOTAL_VERSIONED_METHODS`` in `nova/tests/unit/api/openstack/placement/test_microversion.py`. This provides a confirmatory check just to make sure you're paying attention and as a helpful reminder to do the other things in this list. In the placement API, microversions only use the modern form of the version header:: OpenStack-API-Version: placement 1.2 If a valid microversion is present in a request it will be placed, as a ``Version`` object, into the WSGI environment with the ``placement.microversion`` key. Often, accessing this in handler code directly (to control branching) is the most explicit and granular way to have different behavior per microversion. A ``Version`` instance can be treated as a tuple of two ints and compared as such or there is a ``matches`` method. In other cases there are some helper methods in the microversion package: * The ``raise_404_if_not_version`` utility will cause a 404 if the requested microversion is not within a described version window. * The ``version_handler`` decorator makes it possible to have multiple different handler methods of the same (fully-qualified by package) name, each available for a different microversion window. If a request wants a microversion that's not available, a 404 response is returned. There is a unit test in place which will fail if there are version intersections. Adding a New Handler ==================== Adding a new URL or a new method (e.g, ``PATCH``) to an existing URL requires adding a new handler function. In either case a new microversion and release note is required. When adding an entirely new route a request for a lower microversion should return a ``404``. When adding a new method to an existing URL a request for a lower microversion should return a ``405``. In either case, the ``ROUTE_DECLARATIONS`` dictionary in the `nova.api.openstack.placement.handler` module should be updated to point to a function within a module that contains handlers for the type of entity identified by the URL. Collection and individual entity handlers of the same type should be in the same module. As mentioned above, the handler function should be decorated with ``@webob.dec.wsgify``, take a single argument ``req`` which is a WebOb `Request`_ object, and return a WebOb `Response`_. For ``PUT`` and ``POST`` methods, request bodies are expected to be JSON based on a content-type of ``application/json``. This may be enforced by using a decorator: ``@util.require_content('application/json')``. If the body is not `JSON`, a ``415`` response status is returned. Response bodies are usually `JSON`. A handler can check the `Accept` header provided in a request using another decorator: ``@util.check_accept('application/json')``. If the header does not allow `JSON`, a ``406`` response status is returned. `JSON` sent in a request should be validated against a JSON Schema. A ``util.extract_json`` method is available. This takes a request body and a schema. If multiple schema are used for different microversions of the same request, the caller is responsible for selecting the right one before calling ``extract_json``. When a handler needs to read or write the data store it should use methods on the objects found in the `nova.objects.resource_provider` package. Doing so requires a context which is provided to the handler method via the WSGI environment. It can be retrieved as follows:: context = req.environ['placement.context'] .. note:: If your change requires new methods or new objects in the `resource_provider` package, after you've made sure that you really do need those new methods or objects (you may not!) make those changes in a patch that is separate from and prior to the HTTP API change. Testing of handler code is described in the next section. Testing ======= Most of the handler code in the placement API is tested using `gabbi`_. Some utility code is tested with unit tests found in `nova/tests/unit/api/openstack/placement/`. The back-end objects are tested with a combination of unit and functional tests found in `nova/tests/unit/objects/test_resource_provider.py` and `nova/tests/functional/db`. Adding unit and non-gabbi functional tests is done in the same way as other aspects of nova. Using Gabbi ----------- Gabbi was developed in the `telemetry`_ project to provide a declarative way to test HTTP APIs that preserves visibility of both the request and response of the HTTP interaction. Tests are written in YAML files where each file is an ordered suite of tests. Fixtures (such as a database) are set up and torn down at the beginning and end of each file, not each test. JSON response bodies can be evaluated with `JSONPath`_. The placement WSGI application is run via `wsgi-intercept`_, meaning that real HTTP requests are being made over a file handle that appears to Python to be a socket. In the placement API the YAML files (aka "gabbits") can be found in `nova/tests/functional/api/openstack/placement/gabbits`. Fixture definitions are in `fixtures.py` in the parent directory. Tests are currently grouped by handlers (e.g., `resource-provider.yaml` and `inventory.yaml`). This is not a requirement and as we increase the number of tests it makes sense to have more YAML files with fewer tests, divided up by the arc of API interaction that they test. The gabbi tests are integrated into the functional tox target, loaded via `nova/tests/functional/api/openstack/placement/test_placement_api.py`. If you want to run just the gabbi tests one way to do so is:: tox -efunctional test_placement_api If you want to run just one yaml file (in this example `inventory.yaml`):: tox -efunctional placement_api.inventory It is also possible to run just one test from within one file. When you do this every test prior to the one you asked for will also be run. This is because the YAML represents a sequence of dependent requests. Select the test by using the name in the yaml file, replacing space with ``_``:: tox -efunctional placement_api.inventory_post_new_ipv4_address_inventory .. note:: `.testr.conf` in the nova repository is configured such that each gabbi YAML is considered a group. Thus, all tests in the file will be run in the same process when running testr concurrently (the default). Writing More Gabbi Tests ------------------------ The docs for `gabbi`_ try to be complete and explain the `syntax`_ in some depth. Where something is missing or confusing, please log a `bug`_. While it is possible to test all aspects of a response (all the response headers, the status code, every attribute in a JSON structure) in one single test, doing so will likely make the test harder to read and will certainly make debugging more challenging. If there are multiple things that need to be asserted, making multiple requests is reasonable. Since database set up is only happening once per file (instead of once per test) and since there's no TCP overhead, the tests run quickly. While `fixtures`_ can be used to establish entities that are required for tests, creating those entities via the HTTP API results in tests which are more descriptive. For example the `inventory.yaml` file creates the resource provider to which it will then add inventory. This makes it easy to explore a sequence of interactions and a variety of responses with the tests: * create a resource provider * confirm it has empty inventory * add inventory to the resource provider (in a few different ways) * confirm the resource provider now has inventory * modify the inventory * delete the inventory * confirm the resource provider now has empty inventory Nothing special is required to add a new set of tests: create a YAML file with a unique name in the same directory as the others. The other files can provide examples. Gabbi can provide a useful way of doing test driven development of a new handler: create a YAML file that describes the desired URLs and behavior and write the code to make it pass. It's also possible to use gabbi against a running placement service, for example in devstack. See `gabbi-run`_ to get started. Futures ======= Since before it was created there has been a long term goal for the placement service to be extracted to its own repository and operate as its own independent service. There are many reasons for this, but two main ones are: * Multiple projects, not just nova, will eventually need to manage resource providers using the placement API. * A separate service helps to maintain and preserve a strong contract between the placement service and the consumers of the service. To lessen the pain of the eventual extraction of placement the service has been developed in a way to limit dependency on the rest of the nova codebase and be self-contained: * Most code is in `nova/api/openstack/placement` except for oslo versioned object code in `nova/objects/resource_provider.py`. * Database query code is kept within the objects. * The methods on the objects are not remotable, as the only intended caller is the placement API code. There are some exceptions to the self-contained rule (which will have to be addressed if the extraction ever happens): * Exceptions unique to the placement API are still within the `nova.exceptions` package. * Code related to a resource class cache is within the `nova.db` package. * Database models, migrations and tables use the nova api database. * The nova `FaultWrapper` middleware is being used. * `nova.i18n` package provides the ``_`` and related functions. * `nova.conf` is used for configuration. * Unit and functional tests depend on fixtures and other functionality in base classes provided by nova. When creating new code for the placement service, please be aware of the plan for an eventual extraction and avoid creating unnecessary interdependencies. .. _WSGI: https://www.python.org/dev/peps/pep-3333/ .. _versioned objects: http://docs.openstack.org/developer/oslo.versionedobjects/ .. _wsgify: http://docs.webob.org/en/latest/api/dec.html .. _WebOb: http://docs.webob.org/en/latest/ .. _Request: http://docs.webob.org/en/latest/reference.html#request .. _Response: http://docs.webob.org/en/latest/#response .. _microversions: http://specs.openstack.org/openstack/api-wg/guidelines/microversion_specification.html .. _when a microversion is needed: http://docs.openstack.org/developer/nova/api_microversion_dev.html#when-do-i-need-a-new-microversion .. _release note: http://docs.openstack.org/developer/reno/usage.html .. _gabbi: https://gabbi.readthedocs.io/ .. _telemetry: http://specs.openstack.org/openstack/telemetry-specs/specs/kilo/declarative-http-tests.html .. _wsgi-intercept: http://wsgi-intercept.readthedocs.io/ .. _syntax: https://gabbi.readthedocs.io/en/latest/format.html .. _bug: https://github.com/cdent/gabbi/issues .. _fixtures: http://gabbi.readthedocs.io/en/latest/fixtures.html .. _JSONPath: http://goessner.net/articles/JsonPath/ .. _gabbi-run: http://gabbi.readthedocs.io/en/latest/runner.html