Open vSwitch Firewall Driver

The OVS driver has the same API as the current iptables firewall driver, keeping the state of security groups and ports inside of the firewall. Class SGPortMap was created to keep state consistent, and maps from ports to security groups and vice-versa. Every port and security group is represented by its own object encapsulating the necessary information.

Note: Open vSwitch firewall driver uses register 5 for marking flow related to port and register 6 which defines network and is used for conntrack zones.

Firewall API calls

There are two main calls performed by the firewall driver in order to either create or update a port with security groups - prepare_port_filter and update_port_filter. Both methods rely on the security group objects that are already defined in the driver and work similarly to their iptables counterparts. The definition of the objects will be described later in this document. prepare_port_filter must be called only once during port creation, and it defines the initial rules for the port. When the port is updated, all filtering rules are removed, and new rules are generated based on the available information about security groups in the driver.

Security group rules can be defined in the firewall driver by calling update_security_group_rules, which rewrites all the rules for a given security group. If a remote security group is changed, then update_security_group_members is called to determine the set of IP addresses that should be allowed for this remote security group. Calling this method will not have any effect on existing instance ports. In other words, if the port is using security groups and its rules are changed by calling one of the above methods, then no new rules are generated for this port. update_port_filter must be called for the changes to take effect.

All the machinery above is controlled by security group RPC methods, which mean the firewall driver doesn’t have any logic of which port should be updated based on the provided changes, it only accomplishes actions when called from the controller.

OpenFlow rules

At first, every connection is split into ingress and egress processes based on the input or output port respectively. Each port contains the initial hardcoded flows for ARP, DHCP and established connections, which are accepted by default. To detect established connections, a flow must by marked by conntrack first with an action=ct() rule. An accepted flow means that ingress packets for the connection are directly sent to the port, and egress packets are left to be normally switched by the integration bridge.

Connections that are not matched by the above rules are sent to either the ingress or egress filtering table, depending on its direction. The reason the rules are based on security group rules in separate tables is to make it easy to detect these rules during removal.

The firewall driver method create_rules_generator_for_port creates a generator that builds a single security group rule either from rules belonging to a given group, or rules allowing connections to remote groups. Every rule is then expanded into several OpenFlow rules by the method create_flows_from_rule_and_port.

Rules example with explanation:

The following example presents two ports on the same host. They have different security groups and there is icmp traffic allowed from first security group to the second security group. Ports have following attributes:

Port 1
  - plugged to the port 1 in OVS bridge
  - ip address: 192.168.0.1
  - mac address: fa:16:3e:a4:22:10
  - security group 1: can send icmp packets out
  - allowed address pair: 10.0.0.1/32, fa:16:3e:8c:84:13

Port 2
  - plugged to the port 2 in OVS bridge
  - ip address: 192.168.0.2
  - mac address: fa:16:3e:24:57:c7
  - security group 2: can receive icmp packets from security group 1
  - allowed address pair: 10.1.0.0/24, fa:16:3e:8c:84:14

The first table 0 distinguishes the traffic to ingress or egress and loads to register 5 value identifying port traffic. Ingress flow is determined by switch port number and egress flow is determined by destination mac address. register 6 contains

table=60,  priority=100,in_port=1 actions=load:0x1->NXM_NX_REG5[],load:0x284->NXM_NX_REG6[],resubmit(,71)
table=60,  priority=100,in_port=2 actions=load:0x2->NXM_NX_REG5[],load:0x284->NXM_NX_REG6[],resubmit(,71)
table=60,  priority=90,dl_dst=fa:16:3e:a4:22:10 actions=load:0x1->NXM_NX_REG5[],load:0x284->NXM_NX_REG6[],resubmit(,81)
table=60,  priority=90,dl_dst=fa:16:3e:8c:84:13 actions=load:0x1->NXM_NX_REG5[],load:0x284->NXM_NX_REG6[],resubmit(,81)
table=60,  priority=90,dl_dst=fa:16:3e:24:57:c7 actions=load:0x2->NXM_NX_REG5[],load:0x284->NXM_NX_REG6[],resubmit(,81)
table=60,  priority=90,dl_dst=fa:16:3e:8c:84:14 actions=load:0x2->NXM_NX_REG5[],load:0x284->NXM_NX_REG6[],resubmit(,81)
table=60,  priority=0 actions=NORMAL

Following table 71 implements arp spoofing protection, ip spoofing protection, allows traffic for obtaining ip addresses (dhcp, dhcpv6, slaac, ndp) for egress traffic and allows arp replies. Also identifies not tracked connections which are processed later with information obtained from conntrack. Notice the zone=NXM_NX_REG6[0..15] in actions when obtaining information from conntrack. It says every port has its own conntrack zone defined by value in register 6. It’s there to avoid accepting established traffic that belongs to different port with same conntrack parameters.

Rules below allow ICMPv6 traffic for multicast listeners, neighbour solicitation and neighbour advertisement.

table=71, priority=95,icmp6,reg5=0x1,in_port=1,icmp_type=130 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x1,in_port=1,icmp_type=131 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x1,in_port=1,icmp_type=132 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x1,in_port=1,icmp_type=135 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x1,in_port=1,icmp_type=136 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x2,in_port=2,icmp_type=130 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x2,in_port=2,icmp_type=131 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x2,in_port=2,icmp_type=132 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x2,in_port=2,icmp_type=135 actions=NORMAL
table=71, priority=95,icmp6,reg5=0x2,in_port=2,icmp_type=136 actions=NORMAL

Following rules implement arp spoofing protection

table=71, priority=95,arp,reg5=0x1,in_port=1,dl_src=fa:16:3e:a4:22:10,arp_spa=192.168.0.1 actions=NORMAL
table=71, priority=95,arp,reg5=0x1,in_port=1,dl_src=fa:16:3e:8c:84:13,arp_spa=10.0.0.1 actions=NORMAL
table=71, priority=95,arp,reg5=0x2,in_port=2,dl_src=fa:16:3e:24:57:c7,arp_spa=192.168.0.2 actions=NORMAL
table=71, priority=95,arp,reg5=0x2,in_port=2,dl_src=fa:16:3e:8c:84:14,arp_spa=10.1.0.0/24 actions=NORMAL

DHCP and DHCPv6 traffic is allowed to instance but DHCP servers are blocked on instances.

table=71, priority=80,udp,reg5=0x1,in_port=1,tp_src=68,tp_dst=67 actions=resubmit(,73)
table=71, priority=80,udp6,reg5=0x1,in_port=1,tp_src=546,tp_dst=547 actions=resubmit(,73)
table=71, priority=70,udp,reg5=0x1,in_port=1,tp_src=67,tp_dst=68 actions=drop
table=71, priority=70,udp6,reg5=0x1,in_port=1,tp_src=547,tp_dst=546 actions=drop
table=71, priority=80,udp,reg5=0x2,in_port=2,tp_src=68,tp_dst=67 actions=resubmit(,73)
table=71, priority=80,udp6,reg5=0x2,in_port=2,tp_src=546,tp_dst=547 actions=resubmit(,73)
table=71, priority=70,udp,reg5=0x2,in_port=2,tp_src=67,tp_dst=68 actions=drop
table=71, priority=70,udp6,reg5=0x2,in_port=2,tp_src=547,tp_dst=546 actions=drop

Flowing rules obtain conntrack information for valid ip and mac address combinations. All other packets are dropped.

table=71, priority=65,ct_state=-trk,ip,reg5=0x1,in_port=1,dl_src=fa:16:3e:a4:22:10,nw_src=192.168.0.1 actions=ct(table=72,zone=NXM_NX_REG6[0..15])
table=71, priority=65,ct_state=-trk,ip,reg5=0x1,in_port=1,dl_src=fa:16:3e:8c:84:13,nw_src=10.0.0.1 actions=ct(table=72,zone=NXM_NX_REG6[0..15])
table=71, priority=65,ct_state=-trk,ip,reg5=0x2,in_port=2,dl_src=fa:16:3e:24:57:c7,nw_src=192.168.0.2 actions=ct(table=72,zone=NXM_NX_REG6[0..15])
table=71, priority=65,ct_state=-trk,ip,reg5=0x2,in_port=2,dl_src=fa:16:3e:8c:84:14,nw_src=10.1.0.0/24 actions=ct(table=72,zone=NXM_NX_REG6[0..15])
table=71, priority=65,ct_state=-trk,ipv6,reg5=0x1,in_port=1,dl_src=fa:16:3e:a4:22:10,ipv6_src=fe80::f816:3eff:fea4:2210 actions=ct(table=72,zone=NXM_NX_REG6[0..15])
table=71, priority=65,ct_state=-trk,ipv6,reg5=0x2,in_port=2,dl_src=fa:16:3e:24:57:c7,ipv6_src=fe80::f816:3eff:fe24:57c7 actions=ct(table=72,zone=NXM_NX_REG6[0..15])
table=71, priority=10,ct_state=-trk,reg5=0x1,in_port=1 actions=drop
table=71, priority=10,ct_state=-trk,reg5=0x2,in_port=2 actions=drop
table=71, priority=0 actions=drop

table 72 accepts only established or related connections, and implements rules defined by the security group. As this egress connection might also be an ingress connection for some other port, it’s not switched yet but eventually processed by ingress pipeline.

All established or new connections defined by security group rule are accepted, which will be explained later. All invalid packets are dropped. In case below we allow all icmp egress traffic.

table=72, priority=70,ct_state=+est-rel-rpl,icmp,reg5=0x1, actions=resubmit(,73)
table=72, priority=70,ct_state=+new-est,icmp,reg5=0x1, actions=resubmit(,73)
table=72, priority=50,ct_state=+inv+trk actions=drop

Important on the flows below is the ct_mark=0x1. Such value have flows that were marked as not existing anymore by rule introduced later. Those are typically connections that were allowed by some security group rule and the rule was removed.

table=72, priority=50,ct_mark=0x1,reg5=0x1 actions=drop
table=72, priority=50,ct_mark=0x1,reg5=0x2 actions=drop

All other connections that are not marked and are established or related are allowed.

table=72, priority=50,ct_state=+est-rel+rpl,ct_zone=644,ct_mark=0,reg5=0x1 actions=NORMAL
table=72, priority=50,ct_state=+est-rel+rpl,ct_zone=644,ct_mark=0,reg5=0x2 actions=NORMAL
table=72, priority=50,ct_state=-new-est+rel-inv,ct_zone=644,ct_mark=0,reg5=0x1 actions=NORMAL
table=72, priority=50,ct_state=-new-est+rel-inv,ct_zone=644,ct_mark=0,reg5=0x2 actions=NORMAL

In the following flows are marked established connections that weren’t matched in the previous flows, which means they don’t have accepting security group rule anymore.

table=72, priority=40,ct_state=-est,reg5=0x1 actions=drop
table=72, priority=40,ct_state=+est,reg5=0x1 actions=ct(commit,zone=NXM_NX_REG6[0..15],exec(load:0x1->NXM_NX_CT_MARK[]))
table=72, priority=40,ct_state=-est,reg5=0x2 actions=drop
table=72, priority=40,ct_state=+est,reg5=0x2 actions=ct(commit,zone=NXM_NX_REG6[0..15],exec(load:0x1->NXM_NX_CT_MARK[]))
table=72, priority=0 actions=drop

In following table 73 are all detected ingress connections sent to ingress pipeline. Since the connection was already accepted by egress pipeline, all remaining egress connections are sent to normal switching.

table=73, priority=100,dl_dst=fa:16:3e:a4:22:10 actions=load:0x1->NXM_NX_REG5[],resubmit(,81)
table=73, priority=100,dl_dst=fa:16:3e:8c:84:13 actions=load:0x1->NXM_NX_REG5[],resubmit(,81)
table=73, priority=100,dl_dst=fa:16:3e:24:57:c7 actions=load:0x2->NXM_NX_REG5[],resubmit(,81)
table=73, priority=100,dl_dst=fa:16:3e:8c:84:14 actions=load:0x2->NXM_NX_REG5[],resubmit(,81)
table=73, priority=90,ct_state=+new-est,reg5=0x1 actions=ct(commit,zone=NXM_NX_REG6[0..15]),NORMAL
table=73, priority=90,ct_state=+new-est,reg5=0x2 actions=ct(commit,zone=NXM_NX_REG6[0..15]),NORMAL
table=73, priority=80,reg5=0x1 actions=NORMAL
table=73, priority=80,reg5=0x2 actions=NORMAL
table=73, priority=0 actions=drop

table 81 is similar to table 71, allows basic ingress traffic for obtaining ip address and arp queries. Note that vlan tag must be removed by adding strip_vlan to actions list, prior to injecting packet directly to port. Not tracked packets are sent to obtain conntrack information.

table=81, priority=100,arp,reg5=0x1 actions=strip_vlan,output:1
table=81, priority=100,arp,reg5=0x2 actions=strip_vlan,output:2
table=81, priority=100,icmp6,reg5=0x1,icmp_type=130 actions=strip_vlan,output:1
table=81, priority=100,icmp6,reg5=0x1,icmp_type=131 actions=strip_vlan,output:1
table=81, priority=100,icmp6,reg5=0x1,icmp_type=132 actions=strip_vlan,output:1
table=81, priority=100,icmp6,reg5=0x1,icmp_type=135 actions=strip_vlan,output:1
table=81, priority=100,icmp6,reg5=0x1,icmp_type=136 actions=strip_vlan,output:1
table=81, priority=100,icmp6,reg5=0x2,icmp_type=130 actions=strip_vlan,output:2
table=81, priority=100,icmp6,reg5=0x2,icmp_type=131 actions=strip_vlan,output:2
table=81, priority=100,icmp6,reg5=0x2,icmp_type=132 actions=strip_vlan,output:2
table=81, priority=100,icmp6,reg5=0x2,icmp_type=135 actions=strip_vlan,output:2
table=81, priority=100,icmp6,reg5=0x2,icmp_type=136 actions=strip_vlan,output:2
table=81, priority=95,udp,reg5=0x1,tp_src=67,tp_dst=68 actions=strip_vlan,output:1
table=81, priority=95,udp6,reg5=0x1,tp_src=547,tp_dst=546 actions=strip_vlan,output:1
table=81, priority=95,udp,reg5=0x2,tp_src=67,tp_dst=68 actions=strip_vlan,output:2
table=81, priority=95,udp6,reg5=0x2,tp_src=547,tp_dst=546 actions=strip_vlan,output:2
table=81, priority=90,ct_state=-trk,ip,reg5=0x1 actions=ct(table=82,zone=NXM_NX_REG6[0..15])
table=81, priority=90,ct_state=-trk,ipv6,reg5=0x1 actions=ct(table=82,zone=NXM_NX_REG6[0..15])
table=81, priority=90,ct_state=-trk,ip,reg5=0x2 actions=ct(table=82,zone=NXM_NX_REG6[0..15])
table=81, priority=90,ct_state=-trk,ipv6,reg5=0x2 actions=ct(table=82,zone=NXM_NX_REG6[0..15])
table=81, priority=80,ct_state=+trk,reg5=0x1 actions=resubmit(,82)
table=81, priority=80,ct_state=+trk,reg5=0x2 actions=resubmit(,82)
table=81, priority=0 actions=drop

Similarly to table 72, table 82 accepts established and related connections. In this case we allow all icmp traffic coming from security group 1 which is in this case only port 1 with ip address 192.168.0.1.

table=82, priority=70,ct_state=+est-rel-rpl,icmp,reg5=0x2,nw_src=192.168.0.1 actions=strip_vlan,output:2
table=82, priority=70,ct_state=+new-est,icmp,reg5=0x2,nw_src=192.168.0.1 actions=ct(commit,zone=NXM_NX_REG6[0..15]),strip_vlan,output:2
table=82, priority=50,ct_state=+inv+trk actions=drop

The mechanism for dropping connections that are not allowed anymore is the same as in table 72.

table=82, priority=50,ct_mark=0x1,reg5=0x1 actions=drop
table=82, priority=50,ct_mark=0x1,reg5=0x2 actions=drop
table=82, priority=50,ct_state=+est-rel+rpl,ct_zone=644,ct_mark=0,reg5=0x1 actions=strip_vlan,output:1
table=82, priority=50,ct_state=+est-rel+rpl,ct_zone=644,ct_mark=0,reg5=0x2 actions=strip_vlan,output:2
table=82, priority=50,ct_state=-new-est+rel-inv,ct_zone=644,ct_mark=0,reg5=0x1 actions=strip_vlan,output:1
table=82, priority=50,ct_state=-new-est+rel-inv,ct_zone=644,ct_mark=0,reg5=0x2 actions=strip_vlan,output:2
table=82, priority=40,ct_state=-est,reg5=0x1 actions=drop
table=82, priority=40,ct_state=+est,reg5=0x1 actions=ct(commit,zone=NXM_NX_REG6[0..15],exec(load:0x1->NXM_NX_CT_MARK[]))
table=82, priority=40,ct_state=-est,reg5=0x2 actions=drop
table=82, priority=40,ct_state=+est,reg5=0x2 actions=ct(commit,zone=NXM_NX_REG6[0..15],exec(load:0x1->NXM_NX_CT_MARK[]))
table=82, priority=0 actions=drop

Note: Conntrack zones on a single node are now based on network to which port is plugged in. That makes a difference between traffic on hypervisor only and east-west traffic. For example, if port has a VIP that was migrated to a port on different node, then new port won’t contain conntrack information about previous traffic that happened with VIP.

Future work

  • Create fullstack tests with tunneling enabled
  • Conjunctions in Openflow rules can be created to decrease the number of rules needed for remote security groups
  • During the update of firewall rules, we can use bundles to make the changes atomic

Upgrade path from iptables hybrid driver

During an upgrade, the agent will need to re-plug each instance’s tap device into the integration bridge while trying to not break existing connections. One of the following approaches can be taken:

1) Pause the running instance in order to prevent a short period of time where its network interface does not have firewall rules. This can happen due to the firewall driver calling OVS to obtain information about OVS the port. Once the instance is paused and no traffic is flowing, we can delete the qvo interface from integration bridge, detach the tap device from the qbr bridge and plug the tap device back into the integration bridge. Once this is done, the firewall rules are applied for the OVS tap interface and the instance is started from its paused state.

2) Set drop rules for the instance’s tap interface, delete the qbr bridge and related veths, plug the tap device into the integration bridge, apply the OVS firewall rules and finally remove the drop rules for the instance.

3) Compute nodes can be upgraded one at a time. A free node can be switched to use the OVS firewall, and instances from other nodes can be live-migrated to it. Once the first node is evacuated, its firewall driver can be then be switched to the OVS driver.