Route Advertisement

BGP

This page discusses the behavior of BGP dynamic routing about how to advertise routes and show the routes details in the project.

BGP dynamic routing could advertise 3 classes of routes:

  • Host routes for floating IP addresses hosted on non-DVR routers, as floatingip address set on the router namespace, it knows how to route the message to the correct way, so the next-hop should be the IP address of router gateway port.
  • Host routes for floating IP addresses hosted on DVR routers. With DVR-enabled routers, the floating IP can be reached directly on the compute node hosting a given instance. As such, host routes for the floating IP address should advertise the FIP agent gateway on the compute node as the next-hop instead of the centralized router. This will keep inbound floating IP traffic from encountering the bottleneck of the centralized router.
  • Prefix routes for directly routable tenant networks with address scopes, the nexthop is the centralized router, the same for DVR and CVR. BGP dynamic routing could advertise tenant network prefixes to physical network devices(routers which support BGP protocol), called this Prefixes advertisement.

When distributed virtual routing (DVR) is enabled on a router, next-hops for floating IP’s and fixed IP’s are not advertised as being at the centralized router. Host routes with the next-hop set to the appropriate compute node are advertised.

Logical Model

+--------+ 1     N +---------------------+
| Router |---------|  BgpAdvertisedRoute |
+--------+         +---------------------+
                             | N
                             |
                             | 1
+---------+ N       N +------------+ N       N +---------+
| BgpPeer |-----------| BgpSpeaker |-----------| Network |
+---------+           +------------+           +---------+
                             | N
                             |
                             | 1
                      +--------------+
                      | AddressScope |
                      +--------------+

Note

A BGP Speaker only supports one address family to speak BGP. A dual-stack IPv4 and IPv6 network needs two BGP Speakers to advertise the routes with BGP, one for IPv4 and the other for IPv6. So A network can have N number of BGP Speakers bound to it.

BgpAdvertisedRoute represents derived data. As the number of BgpAdvertisedRoutes can be quite large, storing in a database table is not feasible. BgpAdvertisedRoute information can be derived by joining data already available in the Neutron database. And now BGP dynamic routing project process the Bgpadvertiseroutes which should be advertised to external Router is basing on the exist Neutron DB tables. Neutron looks on each of the gateway network for any routers with a gateway port on that network. For each router identified, Neutron locates each floating IP and tenant network accessible through the router gateway port. Neutron then advertises each floating IP and tenant network with the IP address of the router gateway port as the next hop.

When BGP Plugin is started, it will register callbacks. All callbacks are used for processing Floating IP, Router Interface and Router Gateway creation or update, this functions listen the events of these resources for calling Dragent to change the advertisement routes.

Now we just focus on the resources which may cause route change, the following callbacks does this work.

  • floatingip_update_callback This function listens to the Floating IP’s AFTER_UPDATE event, it judges whether the associated router is changed, and changes the advertisement routes and nexthop based on that.
  • router_interface_callback This function listens to the tenants’ network routes change, it listens to AFTER_CREATE and AFTER_DELETE events of Router Interface resource. It calls Dragent to advertise or stop the prefix routes after a interface attach into a router.
  • router_gateway_callback This function listens to the router gateway port creation or deletion. It also focuses on tenants’ network routes change.
You could get the advertisement routes of specific BGP Speaker like:
neutron bgp-speaker-advertiseroute-list <created-bgp-speaker>

It does a complicated db query to generate the list of advertised routes. For more details refer to route advertisement db lookup

Table Of Contents

Previous topic

BGP Speaker

Next topic

Alembic-migration

Project Source

This Page