Testing

Dynamic routing enables advertisement of self-service network prefixes to physical network devices that support dynamic routing protocol such as routers. Neutron dynamic routing project that consists of a service plugin-in and agent can advertise neutron private network to outside of OpenStack. This document will describe how to test the Dynamic Routing functionalities, introduce what the environment architecture is for dynamic routing test and show how to setup dynamic routing environment using Devstack.

Environment Architecture

Using the following example architecture as a test environment to deploy neutron-dynamic-routing in your environment. The example architecture will deploy an all-in-one OpenStack and pick up an Ubuntu VM running Quagga as a router outside of OpenStack . See following:

                                                    +--------------+
                                       10.156.18.20 |              |
                 +----------------------------------|   Quagga     |
                 | BGP Peering Session              |   Router     |
                 |                                  |  172.24.4.3  |
                 |                                  +--------------+
                 |                                         |
                 |10.156.18.21                             |       External Network(172.24.4.0/24)
--------------------------------------------------------------------------------------------------                                        |ETH0    |br-ex
        +---------------------------------------+
        |        |        |                     |
        |        |        |                     |
        |        |        +-------+             |
        |        |                |172.24.4.1   |
        |  +------------+     +-------+         |
        |  |            |     |Router |         |
        |  |  Dr-Agent  |     |       |         |
        |  |            |     +-------+         |
        |  +------------+         |             |
        |                  ----------------     |
        |                  Tenant Network       |
        |                   (10.0.0.0/24)       |
        |                                       |
        +---------------------------------------+
        All-In-One OpenStack Installation

Devstack Setup

  1. Download devstack:

    git clone http://git.openstack.org/openstack-dev/devstack.git
    
  2. Enable neutron-dynamic-routing:

    [[local|localrc]]
    enable_plugin neutron-dynamic-routing http://git.openstack.org/openstack/neutron-dynamic-routing
    
  3. Run devstack:

    ./stack.sh
    

Quagga Configure

Quagga is a network routing software available in most GNU/Linux, Solaris, FreeBSD, and NetBSD. It provides the implementation of OSPF, RIP, BGP and IS-IS. This section shows you how to install Quagga and then configure it on Ubuntu Linux.

  1. Install Quagga using apt-get:

    $ sudo apt-get install quagga quagga-doc
    
  2. Create an empty file (/etc/quagga/zebra.conf) and set permissions.

    The Quagga files and configurations will be stored in /etc/quagga:

    $ sudo touch /etc/quagga/zebra.conf
    $ sudo chown quagga.quagga /etc/quagga/zebra.conf
    $ sudo chmod 640 /etc/quagga/zebra.conf
    
  3. Update quagga deamon file.

    You can enable/disable the daemons routing in the /etc/quagga/daemons file. Update /etc/quagga/deamons to enable zebra and bgp:

    zebra=yes
    bgpd=yes
    ospfd=no
    ospf6d=no
    ripd=no
    ripngd=no
    isisd=no
    
  4. Update /etc/quagga/zebra.conf:

    # Zebra configuration
    # name of the router
    hostname quagga_1
    password zebra
    
    # log
    log file /var/log/quagga/zebra.log
    
  5. Update /etc/quagga/bgpd.conf:

    # set router-id to the network address we announce
    bgp router-id 10.156.18.20
    
    # declare a router with local-as 1000
    router bgp 1000
    
    # expose neighbor network which dynamic routing agent is using
    neighbor 10.156.18.21 remote-as 12345
    
    # treat neutron dynamic routing agent as a passive peer in case
    # quagga keeps making futile connection attempts
    neighbor 10.156.18.21 passive
    
    # log
    log file /var/log/quagga/bgpd.log
    
    debug bgp events
    debug bgp filters
    debug bgp fsm
    debug bgp keepalives
    debug bgp updates
    
  6. Restart the Quagga:

    $ sudo /etc/init.d/quagga restart
    

Service Test

  1. As the dynamic routing is only supported by admin, source the devstack admin credentials:

    $ source devstack/openrc admin admin
    
  2. Verify the neutron dynamic routing agent is running.

$ neutron agent-list --agent-type 'BGP dynamic routing agent'
+--------------------+--------------------+--------------------+-------------------+-------+----------------+---------------------+
| id                 | agent_type         | host               | availability_zone | alive | admin_state_up | binary              |
+--------------------+--------------------+--------------------+-------------------+-------+----------------+---------------------+
| 69ad386f-e055-4284 | BGP dynamic        | yang-devstack-     |                   | :-)   | True           | neutron-bgp-dragent |
| -8c8e-ef9bd540705c | routing agent      | ubuntu-1604        |                   |       |                |                     |
+--------------------+--------------------+--------------------+-------------------+-------+----------------+---------------------+
  1. Create an address scope.

    The provider(external) and tenant networks must belong to the same address scope for the agent to advertise those tenant network prefixes.

    $ neutron address-scope-create --shared public 4
    Created a new address_scope:
    +------------+--------------------------------------+
    | Field      | Value                                |
    +------------+--------------------------------------+
    | id         | c02c358a-9d35-43ea-8313-986b3e4a91c0 |
    | ip_version | 4                                    |
    | name       | public                               |
    | shared     | True                                 |
    | tenant_id  | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +------------+--------------------------------------+
    
  2. Create subnet pools. The provider and tenant networks use different pools.

    • Create the provider network pool.
    $ neutron subnetpool-create --pool-prefix 172.24.4.0/24 \
      --address-scope public provider
    Created a new subnetpool:
    +-------------------+--------------------------------------+
    | Field             | Value                                |
    +-------------------+--------------------------------------+
    | address_scope_id  | 238aaf8f-f91a-4538-b6b2-c0140111cf69 |
    | created_at        | 2016-06-30T07:03:52                  |
    | default_prefixlen | 8                                    |
    | default_quota     |                                      |
    | description       |                                      |
    | id                | 8439bfee-e09c-40a9-a3ea-8cf7212b7ba9 |
    | ip_version        | 4                                    |
    | is_default        | False                                |
    | max_prefixlen     | 32                                   |
    | min_prefixlen     | 8                                    |
    | name              | provider                             |
    | prefixes          | 172.24.4.0/24                        |
    | shared            | False                                |
    | tenant_id         | 21734c4383284cf9906b7fe8246bffb1     |
    | updated_at        | 2016-06-30T07:03:52                  |
    +-------------------+--------------------------------------+
    
    • Create tenant network pool.
    $ neutron subnetpool-create --pool-prefix 10.0.0.0/16 \
      --address-scope public --shared selfservice
    Created a new subnetpool:
    +-------------------+--------------------------------------+
    | Field             | Value                                |
    +-------------------+--------------------------------------+
    | address_scope_id  | c02c358a-9d35-43ea-8313-986b3e4a91c0 |
    | created_at        | 2016-06-30T07:08:30                  |
    | default_prefixlen | 8                                    |
    | default_quota     |                                      |
    | description       |                                      |
    | id                | c7e9737a-cfd3-45b5-a861-d1cee1135a92 |
    | ip_version        | 4                                    |
    | is_default        | False                                |
    | max_prefixlen     | 32                                   |
    | min_prefixlen     | 8                                    |
    | name              | selfservice                          |
    | prefixes          | 10.0.0.0/16                          |
    | shared            | True                                 |
    | tenant_id         | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    | updated_at        | 2016-06-30T07:08:30                  |
    +-------------------+--------------------------------------+
    
  3. Create the provider and tenant networks.

    • Create the provider network.
    $ neutron net-create --router:external True --provider:physical_network provider \
      --provider:network_type flat provider
    Created a new network:
    +---------------------------+--------------------------------------+
    | Field                     | Value                                |
    +---------------------------+--------------------------------------+
    | admin_state_up            | True                                 |
    | id                        | 68ec148c-181f-4656-8334-8f4eb148689d |
    | name                      | provider                             |
    | provider:network_type     | flat                                 |
    | provider:physical_network | provider                             |
    | provider:segmentation_id  |                                      |
    | router:external           | True                                 |
    | shared                    | False                                |
    | status                    | ACTIVE                               |
    | subnets                   |                                      |
    | tenant_id                 | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +---------------------------+--------------------------------------+
    
    • Create a subnet on the provider network using an IP address allocation from the provider subnet pool.
    $ neutron subnet-create --name provider --subnetpool provider \
      --prefixlen 24 provider
    Created a new subnet:
    +-------------------+------------------------------------------------+
    | Field             | Value                                          |
    +-------------------+------------------------------------------------+
    | allocation_pools  | {"start": "172.24.4.2", "end": "172.24.4.254"} |
    | cidr              | 172.24.4.0/24                                  |
    | created_at        | 2016-03-17T23:17:16                            |
    | description       |                                                |
    | dns_nameservers   |                                                |
    | enable_dhcp       | True                                           |
    | gateway_ip        | 172.24.4.1                                     |
    | host_routes       |                                                |
    | id                | 8ed65d41-2b2a-4f3a-9f92-45adb266e01a           |
    | ip_version        | 4                                              |
    | ipv6_address_mode |                                                |
    | ipv6_ra_mode      |                                                |
    | name              | provider                                       |
    | network_id        | 68ec148c-181f-4656-8334-8f4eb148689d           |
    | subnetpool_id     | 3771c0e7-7096-46d3-a3bd-699c58e70259           |
    | tenant_id         | b3ac05ef10bf441fbf4aa17f16ae1e6d               |
    | updated_at        | 2016-03-17T23:17:16                            |
    +-------------------+------------------------------------------------+
    
    • Create the tenant network.
    $ neutron net-create private
    Created a new network:
    +---------------------------+--------------------------------------+
    | Field                     | Value                                |
    +---------------------------+--------------------------------------+
    | admin_state_up            | True                                 |
    | id                        | 01da3e19-129f-4d26-b065-255ade0e5e2c |
    | name                      | private                              |
    | shared                    | False                                |
    | status                    | ACTIVE                               |
    | subnets                   |                                      |
    | tenant_id                 | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +---------------------------+--------------------------------------+
    
    • Create a subnet on the tenant network using an IP address allocation from the private subnet pool.
    $ neutron subnet-create --name selfservice --subnetpool private \
      --prefixlen 24 private
    Created a new subnet:
    +-------------------+--------------------------------------------+
    | Field             | Value                                      |
    +-------------------+--------------------------------------------+
    | allocation_pools  | {"start": "10.0.0.2", "end": "10.0.0.254"} |
    | cidr              | 10.0.0.0/24                                |
    | created_at        | 2016-03-17T23:20:20                        |
    | description       |                                            |
    | dns_nameservers   |                                            |
    | enable_dhcp       | True                                       |
    | gateway_ip        | 10.0.0.1                                   |
    | host_routes       |                                            |
    | id                | 8edd3dc2-df40-4d71-816e-a4586d61c809       |
    | ip_version        | 4                                          |
    | ipv6_address_mode |                                            |
    | ipv6_ra_mode      |                                            |
    | name              | private                                    |
    | network_id        | 01da3e19-129f-4d26-b065-255ade0e5e2c       |
    | subnetpool_id     | c7e9737a-cfd3-45b5-a861-d1cee1135a92       |
    | tenant_id         | b3ac05ef10bf441fbf4aa17f16ae1e6d           |
    | updated_at        | 2016-03-17T23:20:20                        |
    +-------------------+--------------------------------------------+
    
  4. Create and configure router

    • Create a router.
    $ neutron router-create router
    +-----------------------+--------------------------------------+
    | Field                 | Value                                |
    +-----------------------+--------------------------------------+
    | admin_state_up        | True                                 |
    | external_gateway_info |                                      |
    | id                    | 49439b14-f6ee-420d-8c48-d3767fadcb3a |
    | name                  | router                               |
    | status                | ACTIVE                               |
    | tenant_id             | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +-----------------------+--------------------------------------+
    
    • Add the private subnet as an interface on the router.
    $ neutron router-interface-add router selfservice
    Added interface 969a1d4b-7fa1-4346-9963-de06becab87a to router router.
    
    • Add the provide network as a gateway on the router
    $ neutron router-gateway-set router provider
    Set gateway for router router
    
    • Verify router ports. Note: from this result, you can see what the advertised routes are.
    $ neutron router-port-list router
    +--------------------------------------+------+-------------------+----------------------------------------------------+
    | id                                   | name | mac_address       | fixed_ips                                          |
    +--------------------------------------+------+-------------------+----------------------------------------------------+
    | dc675aab-5a8b-462c-872e-2f791b6c1730 |      | fa:16:3e:e5:a2:d2 | {"subnet_id": "1c6b725e-                           |
    |                                      |      |                   | 890e-4454-8842-7ff22ffa704b", "ip_address":        |
    |                                      |      |                   | "10.0.0.1"}                                        |
    | e15c701d-868f-4171-a282-e6a4567a8d83 |      | fa:16:3e:28:86:4c | {"subnet_id":                                      |
    |                                      |      |                   | "b442c453-7e4a-4568-9d70-1dde91a65fbb",            |
    |                                      |      |                   | "ip_address": "172.24.4.2"}                        |
    +--------------------------------------+------+-------------------+----------------------------------------------------+
    
  5. Create and configure the BGP speaker

    The BGP speaker advertised the next-hop IP address for the tenant network prefix.

    • Create the BGP speaker.

    Replace LOCAL_AS with an appropriate local autonomous system number. The example configuration uses AS 12345.

    $ neutron bgp-speaker-create --ip-version 4 \
      --local-as LOCAL_AS bgp-speaker
    Created a new bgp_speaker:
    +-----------------------------------+--------------------------------------+
    | Field                             | Value                                |
    +-----------------------------------+--------------------------------------+
    | advertise_floating_ip_host_routes | True                                 |
    | advertise_tenant_networks         | True                                 |
    | id                                | 5f227f14-4f46-4eca-9524-fc5a1eabc358 |
    | ip_version                        | 4                                    |
    | local_as                          | 12345                                |
    | name                              | bgp-speaker                          |
    | networks                          |                                      |
    | peers                             |                                      |
    | tenant_id                         | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +-----------------------------------+--------------------------------------+
    
    • Associate the BGP speaker with the provider network.

    A BGP speaker requires association with a provider network to determine eligible prefixes. After the association, the BGP speaker can advertise the tenant network prefixes with the corresponding router as the next-hop IP address.

    $ neutron bgp-speaker-network-add bgp-speaker provider
    Added network provider to BGP speaker bgpspeaker.
    
    • Verify the association of the provider network with the BGP speaker.

    Checking the networks attribute.

    $ neutron bgp-speaker-show bgpspeaker
    +-----------------------------------+--------------------------------------+
    | Field                             | Value                                |
    +-----------------------------------+--------------------------------------+
    | advertise_floating_ip_host_routes | True                                 |
    | advertise_tenant_networks         | True                                 |
    | id                                | 5f227f14-4f46-4eca-9524-fc5a1eabc358 |
    | ip_version                        | 4                                    |
    | local_as                          | 12345                                |
    | name                              | bgp-speaker                          |
    | networks                          | 68ec148c-181f-4656-8334-8f4eb148689d |
    | peers                             |                                      |
    | tenant_id                         | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +-----------------------------------+--------------------------------------+
    
    • Verify the prefixes and next-hop ip addresses that the BGP speaker advertises.
    $ neutron bgp-speaker-advertiseroute-list bgpspeaker
    +-------------+------------+
    | destination | next_hop   |
    +-------------+------------+
    | 10.0.0.0/24 | 172.24.4.3 |
    +-------------+------------+
    
    • Create a BGP peer.

    Here the BGP peer is pointed to the quagga VM. Replace REMOTE_AS with an appropriate remote autonomous system number. The example configuration uses AS 12345 which triggers iBGP peering.

    $ neutron bgp-peer-create --peer-ip 10.156.18.20 \
      --remote-as REMOTE_AS bgp-peer
    Created a new bgp_peer:
    +-----------+--------------------------------------+
    | Field     | Value                                |
    +-----------+--------------------------------------+
    | auth_type | none                                 |
    | id        | 35c89ca0-ac5a-4298-a815-0b073c2362e9 |
    | name      | bgp-peer                             |
    | peer_ip   | 10.156.18.20                         |
    | remote_as | 12345                                |
    | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +-----------+--------------------------------------+
    
    • Add a BGP peer to the BGP speaker.
    $ neutron bgp-speaker-peer-add bgp-speaker bgp-peer
    Added BGP peer bgppeer to BGP speaker bgpspeaker.
    
    • Verify the association of the BGP peer with the BGP speaker.

    Checking the peers attribute.

    $ neutron bgp-speaker-show bgp-speaker
    +-----------------------------------+--------------------------------------+
    | Field                             | Value                                |
    +-----------------------------------+--------------------------------------+
    | advertise_floating_ip_host_routes | True                                 |
    | advertise_tenant_networks         | True                                 |
    | id                                | 5f227f14-4f46-4eca-9524-fc5a1eabc358 |
    | ip_version                        | 4                                    |
    | local_as                          | 12345                                |
    | name                              | bgp-speaker                          |
    | networks                          | 68ec148c-181f-4656-8334-8f4eb148689d |
    | peers                             | 35c89ca0-ac5a-4298-a815-0b073c2362e9 |
    | tenant_id                         | b3ac05ef10bf441fbf4aa17f16ae1e6d     |
    +-----------------------------------+--------------------------------------+
    
  6. Schedule the BGP speaker to an agent.

    • Schedule the BGP speaker to BGP dynamic routing agent

    BGP speakers require manual scheduling to an agent. BGP speakers only form peering sessions.

    $ neutron bgp-speaker-network-add bgp-speaker provider
    Added network provider to BGP speaker bgpspeaker.
    
    • Verify scheduling of the BGP speaker to the agent.
    neutron bgp-dragent-list-hosting-speaker bgp-speaker
    +--------------------------------------+---------------------------+----------------+-------+
    | id                                   | host                      | admin_state_up | alive |
    +--------------------------------------+---------------------------+----------------+-------+
    | 69ad386f-e055-4284-8c8e-ef9bd540705c | yang-devstack-ubuntu-1604 | True           | :-)   |
    +--------------------------------------+---------------------------+----------------+-------+