Installation and configuration

Installation and configuration

Supported MidoNet versions

The current set of supported versions of MidoNet are:

  • v5.x

NOTE: MidoNet changed its versioning scheme. v5.0 is what used to be called v2015.09.

How to Install

For productional deployments, we recommend to use a package for your distribution if available:

http://builds.midonet.org/

You can install the plugin from the source code by running the following command:

$ sudo python setup.py install

The plugin requires python-midonetclient package, which is usually available along with other midonet packages. It’s recommended to use the same version of python-midonetclient and midonet-cluster. Alternatively, you can install python-midonetclient from source:

$ sudo pip install -e 'git://github.com/midonet/midonet.git@master#egg=midonetclient&subdirectory=python-midonetclient'

MidoNet API configuration

You need to configure the Neutron server how to talk with your MidoNet cluster.

ML2 mechanism and type drivers

networking-midonet is compatible with ML2 plugin. ML2 mechanism driver and type drivers for MidoNet are available:

[DEFAULT]
core_plugin = ml2

[ml2]
tenant_network_types = midonet
type_drivers = midonet,uplink
mechanism_drivers = midonet

L3 service plugin

networking-midonet uses its own L3 service plugin:

[DEFAULT]
service_plugins = midonet_l3

L3 extensions

In addition to the standard ones, networking-midonet L3 service plugin provides the following extensions. No additional configurations are necessary to enable them. They are enabled unconditionally.

  • router-interface-fip (MidoNet 5.1.1 and later)
  • fip64 (MidoNet 5.4 and later)

Interaction with Neutron agents

No Neutron agents are necessary for networking-midonet.

You can configure networking-midonet work with Neutron DHCP and Metadata agents. But it isn’t recommended anymore.

For details, please refer to MidoNet documentation:

https://docs.midonet.org

Interface driver

Neutron agents use interface driver to connect themselves into the datapath. In case of MidoNet, they should be configured with the MidoNet interface driver.:

[DEFAULT]
interface_driver = midonet

FWaaS

Starting v5.0, MidoNet implements Neutron FWaaS extension API.

To configure it, add the following service plugin to the service_plugins list in the DEFAULT group of /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = midonet_firewall

NOTE: No need to configure Firewall Driver at all. It’s irrelevant because this plugin does not use Neutron L3 agent.

LBaaS v2

Starting v5.4, MidoNet implements Neutron LBaaS v2 extension API.

MidoNet plugin provides LBaaS v2 service driver.

To configure it, add the following entries in the Neutron configuration file /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = lbaasv2

[service_providers]
service_provider=LOADBALANCERV2:Midonet:midonet.neutron.services.loadbalancer.v2_driver.MidonetLoadBalancerDriver:default

VPNaaS

Starting v5.1, MidoNet implements Neutron VPNaaS extension API.

MidoNet plugin implements VPNaaS as a service driver. To configure it, add the following entries in the Neutron configuration file /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = vpnaas

[service_providers]
service_provider=VPN:Midonet:midonet.neutron.services.vpn.service_drivers.midonet_ipsec.MidonetIPsecVPNDriver:default

NOTE: This plugin does not use Neutron VPNaaS agent.

Gateway Device Service

Starting v5.1, MidoNet implements Gateway Device Service vendor extension API.

To configure it, add the following service plugin to the service_plugins list in the DEFAULT group of /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = midonet_gwdevice

L2 Gateway Service

Starting v5.1, MidoNet implements Neutron L2 Gateway Service extension API. The implementation differs slightly from upstream. Please check the spec to see the differences:

https://docs.openstack.org/networking-midonet/latest/specs/mitaka/border_gw.html

MidoNet plugin implements L2 Gateway Service as a service driver. To configure it, add the following service plugin to the service_plugins list in the DEFAULT group of /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = midonet_l2gw

In addition, configure the service provider in the ‘service_providers’ group of L2 Gateway plugin configuration file /etc/neutron/l2gw_plugin.ini:

[service_providers]
service_provider = L2GW:Midonet:midonet.neutron.services.l2gateway.service_drivers.l2gw_midonet.MidonetL2gwDriver:default

BGP dynamic routing service

Starting v5.2, MidoNet implements Neutron BGP dynamic routing service extension API. The implementation differs from upstream as follows:

  • Router that is treated as bgp-speaker can be specified explicitly.
  • Bgp-peer can relate to only one bgp-speaker.
  • Binding network to bgp-speaker must be done before associating peers.
  • Removing network from bgp-speaker must be done after all peers are disassociated from the bgp-speaker.
  • Only one network can be associated with a bgp-speaker.
  • Advertise_floating_ip_host_routes and advertise_tenant_networks are ignored.
  • Attached network to the router and destination network in extra routes on the router are showed as advertised routes.

To configure it, add the following service plugin to the service_plugins list in the DEFAULT group of /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = midonet_bgp

Logging Resource Service

Starting v5.2, MidoNet implements Neutron Logging Resource Service extension API.

To configure it, add the following service plugin to the service_plugins list in the DEFAULT group of /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = midonet_logging_resource

Firewall log is managed by Quota. Default value of firewall log is 10 that is same number as firewall. Basically, both Quota value for firewall and firewall log should be aligned. To tune it, change value of quota_firewall_log in the quotas group of /etc/neutron/neutron.conf.

Tap-as-a-Service

Starting v5.2, MidoNet implements Tap-as-a-Service extension API.

MidoNet plugin implements TaaS as a service driver. To configure it, add the following entries in the Neutron configuration file /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = taas

In addition, configure the service provider in the ‘service_providers’ group of TaaS plugin configuration file /etc/neutron/taas_plugin.ini:

[service_providers]
service_provider = TAAS:Midonet:midonet.neutron.services.taas.service_drivers.taas_midonet.MidonetTaasDriver:default

QoS

Starting v5.4, MidoNet implements Neutron QoS extension API. It’s automatically enabled when QoS service plugin is configured. No MidoNet-specific configuration is necessary.

QoS service plugin

QoS service plugin can be configured in the Neutron server configuration file /etc/neutron/neutron.conf:

[DEFAULT]
service_plugins = qos

QoS core resource extension for ML2

QoS core resource extension for ML2 plugin can be configured in the Neutron server configuration file /etc/neutron/neutron.conf:

[ml2]
extension_drivers = qos

Horizon

Starting with Newton, Horizon has built-in support for MidoNet network types.

To enable it, add the following configuration to the OPENSTACK_NEUTRON_NETWORK dict in local_settings.py:

'supported_provider_types': ['midonet', 'uplink'],

Magnum

Starting v5.2, MidoNet can be used for Magnum deployment.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.