Applications

Applications

Neutron networks (ML2)

Note

This application is distinct from the use of BaGPipe to create IPVPN or E-VPN interconnections in the context of the BGPVPN Interconnection API (see below).

The bagpipe mechanism driver for Neutron’s ML2 core plugin, when enabled along with the corresponding compute node agent extension, will result in Neutron tenant networks to be realized with E-VPN/VXLAN.

How it works is that a BGP VPN identifier (called a BGP “Route Target”) will be defined for each Neutron tenant network, derived from the VXLAN VNI a.k.a segmentation ID, and the bagpipe agent extension on compute nodes will setup a corresponding E-VPN instance with this identifier on the local BaGPipe-BGP instance on the compute node and attach VM ports to this instance as needed.

This solution is currently supported with the linux networking stack (i.e. with the linuxbridge agent enabled with bagpipe extension, and BaGPipe-BGP driver for the linux bridge VXLAN implementation). The approach would be easily extended to support OpenVSwitch as well.

Another way to understand this approach for someone coming with a Neutron ML2 background is that it is similar to the l2population mechanism except that the bridge forwarding entries are populated based on BGP VPN routes rather than based on information distributed in RPCs. This similarity comes with a difference: while l2population announces the information on one messaging topic, each compute node receiving information about all Neutron networks even the ones not present on its vswitch, the behavior with BaGPipe ML2 is that a compute node will only receive the mappings that it needs.

Neutron BGPVPN Interconnection

Note

This application is distinct from the use of BaGPipe to realize Neutron networks with BGP E-VPNs. bagpipe driver for networking-bgpvpn supports both IPVPNs and E-VPNs, but does not rely on bagpipe ML2 mechanism driver to do so.

In this application, networking-bagpipe aims at proposing a lightweight implementation of the BGPVPN Interconnection service, designed to work with the ML2 openvswitch or linuxbridge mechanism drivers (or as an alternative with the bagpipe ML2 mechanism driver).

When used along with the openvswitch or linuxbridge ML2 mechanism driver, it involves the use of:

  • bagpipe driver for the BGPVPN service plugin (in networking-bgpvpn package)
  • bagpipe_bgpvpn extension for the Neutron compute node agent (in this package)
  • BaGPipe-BGP lightweight BGP VPN implementation (in this package)

Example with OVS agent:

Service Chaining (SFC)

For this application, networking-bagpipe provides a bagpipe driver for the networking-sfc that will result in service chains defined via the networking-sfc API, being realized with BGP VPN stiching, BGP VPN route redistribution and BGP Flowspec routes.

The components involved are:

  • bagpipe driver for the networking-sfc service plugin (in this package)
  • bagpipe_sfc extension for the Neutron compute node agent (in this package)
  • BaGPipe-BGP lightweight BGP VPN implementation (in this package)

Note

This driver is still quite experimental, and still currently relies on using the linuxbrige agent along with the OVS dataplane driver for IPVPN in bagpipe-bgp.

Work in progress and future applications

Work in progress:

  • BaGPipe ML2 with openvswitch agent

Considered:

  • networking-l2gw driver leveraging bagpipe-bgp running on a ToR
  • L3 plugin for inter-subnet distributed routing
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.