Mistral Workflow Language v2 specification

Mistral Workflow Language v2 specification

Introduction

This document fully describes Mistral Workflow Language version 2 of Mistral Workflow Service. Since version 1 issued in May 2014 Mistral team completely reworked the language pursuing the goal in mind to make it easier to understand while more consistent and flexible.

Unlike Mistral Workflow Language v1, v2 assumes that all entities that Mistral works with like workflows and actions are completely independent in terms of how they’re referenced and accessed through API (and also Python Client API and CLI). Workbook, the entity that can combine workflows and actions still exists in the language but only for namespacing and convenience purposes. See Workbooks section for more details.

NOTE: Mistral Workflow Language and API of version 1 has not been supported since April 2015 and version 2 is now the only way to interact with Mistral service.

Mistral Workflow Language consists of the following main object(entity) types that will be described in details below:

Prerequisites

Mistral Workflow Language supports YAQL and Jinja2 expression languages to reference workflow context variables and thereby implements passing data between workflow tasks. It’s also referred to as Data Flow mechanism. YAQL is a simple but powerful query language that allows to extract needed information from JSON structured data. Although Jinja2 is primarily a templating technology, Mistral also uses it for evaluating expressions so users have a choice between YAQL and Jinja2. It’s also possible to combine both expression languages within one workflow definition. The only limitation is that it’s impossible to use both types of expressions within one line. As long as there are YAQL and Jinja2 expressions on different lines of the workflow definition text, it is valid. It is allowed to use YAQL/Jinja2 in the following sections of Mistral Workflow Language:

Mistral Workflow Language is fully based on YAML and knowledge of YAML is a plus for better understanding of the material in this specification. It also takes advantage of supported query languages to define expressions in workflow and action definitions.

Workflows

Workflow is the main building block of Mistral Workflow Language, the reason why the project exists. Workflow represents a process that can be described in a various number of ways and that can do some job interesting to the end user. Each workflow consists of tasks (at least one) describing what exact steps should be made during workflow execution.

YAML example

---
version: '2.0'

create_vm:
  description: Simple workflow example
  type: direct

  input:
    - vm_name
    - image_ref
    - flavor_ref
  output:
    vm_id: <% $.vm_id %>

  tasks:
    create_server:
      action: nova.servers_create name=<% $.vm_name %> image=<% $.image_ref %> flavor=<% $.flavor_ref %>
      publish:
        vm_id: <% task(create_server).result.id %>
      on-success:
        - wait_for_instance

    wait_for_instance:
      action: nova.servers_find id=<% $.vm_id %> status='ACTIVE'
      retry:
        delay: 5
        count: 15

This example workflow simply sends a command to OpenStack Compute service Nova to start creating a virtual machine and wait till it’s created using special “retry” policy.

Workflow types

Mistral Workflow Language v2 introduces different workflow types and the structure of each workflow type varies according to its semantics. Basically, workflow type encapsulates workflow processing logic, a set of meta rules defining how all workflows of this type should work. Currently, Mistral provides two workflow types:

See corresponding sections for details.

Common workflow attributes

  • type - Workflow type. Either ‘direct’ or ‘reverse’. Optional. ‘direct’ by default.
  • description - Arbitrary text containing workflow description. Optional.
  • input - List defining required input parameter names and optionally their default values in a form “my_param: 123”. Optional.
  • output - Any data structure arbitrarily containing YAQL/Jinja2 expressions that defines workflow output. May be nested. Optional.
  • output-on-error - Any data structure arbitrarily containing YAQL/Jinja2 expressions that defines output of a workflow to be returned if it goes into error state. May be nested. Optional.
  • task-defaults - Default settings for some of task attributes defined at workflow level. Optional. Corresponding attribute defined for a specific task always takes precedence. Specific task attributes that could be defined in task-defaults are the following:
    • on-error - List of tasks which will run after the task has completed with an error. For direct workflow only. Optional.
    • on-success - List of tasks which will run after the task has completed successfully. For direct workflow only. Optional.
    • on-complete - List of tasks which will run after the task has completed regardless of whether it is successful or not. For direct workflow only. Optional.
    • requires - List of tasks that a task depends on. For reverse workflow only. Optional.
    • pause-before - Configures pause-before policy. Optional.
    • wait-before - Configures wait-before policy. Optional.
    • wait-after - Configures wait-after policy. Optional.
    • timeout - Configures timeout policy. Optional.
    • retry - Configures retry policy. Optional.
    • concurrency - Configures concurrency policy. Optional.
    • safe-rerun - Configures safe-rerun policy. Optional.
  • tasks - Dictionary containing workflow tasks. See below for more details. Required.

Tasks

Task is what a workflow consists of. It defines a specific computational step in the workflow. When the workflow engine processes entities described in the workflow text written in YAML it schedules tasks for execution. Scheduling a task means that it’s now eligible for execution and will be run some time later. When exactly it will run depends on the system load and configuration. Each task can optionally take input data and produce output. In Mistral Workflow Language v2, task can be associated with an action or a workflow. In the example below there are two tasks of different types:

action_based_task:
  action: std.http url='openstack.org'

workflow_based_task:
  workflow: backup_vm_workflow vm_id=<% $.vm_id %>

Actions will be explained below in an individual paragraph but looking ahead it’s worth saying that Mistral provides a lot of actions out of the box (including actions for most of the core OpenStack services) and it’s also easy to plug new actions into Mistral.

Common task attributes

All Mistral tasks, regardless of workflow type, have the following common attributes:

  • name - Task name must not equal noop, fail, succeed or pause . The max length is 255 symbols. For tasks with join control flow this restriction is 208 symbols.
  • description - Arbitrary text containing task description. Optional.
  • action - Name of the action associated with the task. Can be a static value or an expression (for example, “{{ _.action_name }}”). Mutually exclusive with workflow. If neither action nor workflow are provided then the action ‘std.noop’ will be used that does nothing.
  • workflow - Name of the workflow associated with the task. Can be a static value or an expression (for example, “{{ _.subworkflow_name }}”). Mutually exclusive with action.
  • input - Actual input parameter values of the task’s action or workflow. Optional. Value of each parameter is a JSON-compliant type such as number, string etc, dictionary or list. It can also be a YAQL/Jinja2 expression to retrieve value from task context or any of the mentioned types containing inline expressions (for example, string “<% $.movie_name %> is a cool movie!”) Can be an expression that evaluates to a JSON object.
  • publish - Dictionary of variables to publish to the workflow context. Any JSON-compatible data structure optionally containing expression to select precisely what needs to be published. Published variables will be accessible for downstream tasks via using expressions. Optional.
  • publish-on-error - Same as publish but evaluated in case of task execution failures. Optional
  • with-items - If configured, it allows to run action or workflow associated with a task multiple times on a provided list of items. See Processing collections using ‘with-items’ for details. Optional.
  • keep-result - Boolean value allowing to not store action results after task completion (e.g. if they are large and not needed afterwards). Optional. By default is ‘true’.
  • target - String parameter. It defines an executor to which task action should be sent to. Target here physically means a name of executors group but task will be run only on one of them. Optional.
  • pause-before - Configures pause-before policy. Optional.
  • wait-before - Configures wait-before policy. Optional.
  • wait-after - Configures wait-after policy. Optional.
  • timeout - Configures timeout policy. Optional.
  • retry - Configures retry policy. Optional.
  • concurrency - Configures concurrency policy. Optional.
  • safe-rerun - Boolean value allowing to rerun task if executor dies during action execution. If set to ‘true’ task may be run twice. Optional. By default set to ‘false’.

workflow

If a task has the attribute ‘workflow’ it synchronously starts a sub-workflow with the given name.

Example of a static sub-workflow name:

my_task:
  workflow: name_of_my_workflow

Example of a dynamic sub-workflow name:

---
version: '2.0'

framework:
  input:
    - magic_workflow_name: show_weather

  tasks:
    weather_data:
      action: std.echo
      input:
        output:
          location: wherever
          temperature: "22C"
      publish:
        weather_data: <% task().result %>
      on-success:
        - do_magic

    do_magic:
      # Reference workflow by parameter.
      workflow: <% $.magic_workflow_name %>
      # Expand dictionary to input parameters.
      input: <% $.weather_data %>

show_weather:
  input:
    - location
    - temperature

  tasks:
    write_data:
      action: std.echo
      input:
        output: "<% $.location %>: <% $.temperature %>"

In this example, we defined two workflows in one YAML snippet and the workflow ‘framework’ may call the workflow ‘show_weather’ if ‘framework’ receives the corresponding workflow name through the input parameter ‘magic_workflow_name’. In this case it is set by default so a user doesn’t need to pass anything explicitly.

Note: Typical use for the dynamic sub-workflow selection is when parts of a workflow can be customized. E.g. collect some weather data and then execute some custom workflow on it.

Policies

Any Mistral task regardless of its workflow type can optionally have configured policies.

YAML example

my_task:
  action: my_action
  pause-before: true
  wait-before: 2
  wait-after: 4
  timeout: 30
  retry:
    count: 10
    delay: 20
    break-on: <% $.my_var = true %>
    continue-on: <% $.my_var = false %>

pause-before

Defines whether Mistral Engine should put the workflow on hold or not before starting a task.

wait-before

Defines a delay in seconds that Mistral Engine should wait before starting a task.

wait-after

Defines a delay in seconds that Mistral Engine should wait after a task has completed before starting next tasks defined in on-success, on-error or on-complete.

timeout

Defines a period of time in seconds after which a task will be failed automatically by engine if it hasn’t completed.

concurrency

Defines a max number of actions running simultaneously in a task. Applicable only for tasks that have with-items. If concurrency task property is not set then actions (or workflows in case of nested workflows) of the task will be scheduled for execution all at once.

retry

Defines a pattern how task should be repeated in case of an error.

  • count - Defines a maximum number of times that a task can be repeated.
  • delay - Defines a delay in seconds between subsequent task iterations.
  • break-on - Defines an expression that will break iteration loop if it evaluates to ‘true’. If it fires then the task is considered error.
  • continue-on - Defines an expression that will continue iteration loop if it evaluates to ‘true’. If it fires then the task is considered successful. If it evaluates to ‘false’ then policy will break the iteration.

Retry policy can also be configured on a single line as:

task1:
  action: my_action
  retry: count=10 delay=5 break-on=<% $.foo = 'bar' %>

All parameter values for any policy can be defined as YAQL/Jinja2 expressions.

NOTE: It would be rare to use both break-on and continue-on in the same retry block. break-on should be used when one expects the action to be in an ERROR state for some amount of tries, but may eventually go to a SUCCESS state, thereby stopping the loop. But if break-on is ‘true’ then the retries will stop and the task will be in ERROR. continue-on should be used if the action will usually return SUCCESS, but the action has other results that can be used to signal whether to continue the loop or not.

Input syntax

When describing a workflow task it’s possible to specify its input parameters in two ways:

Full syntax:

my_task:
  action: std.http
  input:
    url: http://mywebsite.org
    method: GET

Simplified syntax:

my_task:
  action: std.http url="http://mywebsite.org" method="GET"

Syntax with dynamic input parameter map:

---
version: '2.0'

example_workflow:
  input:
    - http_request_parameters:
        url: http://mywebsite.org
        method: GET

  tasks:
    setup_task:
      action: std.http
      input: <% $.http_request_parameters %>

The same rules apply to tasks associated with workflows.

Full syntax:

my_task:
  workflow: some_nested_workflow
  input:
    param1: val1
    param2: val2

Simplified syntax:

my_task:
  workflow: some_nested_workflow param1='val1' param2='val2'

Syntax with dynamic input parameter map:

---
version: '2.0'

example_workflow:
  input:
    - nested_params: {"param1": "val1", "param2": "val2"}

  tasks:
    setup_task:
      workflow: some_nested_workflow
      input: <% $.nested_params %>

NOTE: It’s also possible to merge these two approaches and specify a part of parameters using simplified key-value pairs syntax and using keyword input. In this case all the parameters will be effectively merged. If the same parameter is specified in both ways then the one under input keyword takes precedence.

Direct workflow

Direct workflow consists of tasks combined in a graph where every next task starts after another one depending on produced result. So direct workflow has a notion of transition. Direct workflow is considered to be completed if there aren’t any transitions left that could be used to jump to next tasks.

../_images/Mistral_direct_workflow.png

Figure 1. Mistral Direct Workflow.

YAML example

---
version: '2.0'

create_vm_and_send_email:
  type: direct

  input:
    - vm_name
    - image_id
    - flavor_id

  output:
    result: <% $.vm_id %>

  tasks:
    create_vm:
      action: nova.servers_create name=<% $.vm_name %> image=<% $.image_id %> flavor=<% $.flavor_id %>
      publish:
        vm_id: <% task(create_vm).result.id %>
      on-error:
        - send_error_email
      on-success:
        - send_success_email

    send_error_email:
      action: send_email to_addrs=['admin@mysite.org'] body='Failed to create a VM'
      on-complete:
        - fail

    send_success_email:
      action: send_email to_addrs=['admin@mysite.org'] body='Vm is successfully created and its id <% $.vm_id %>'

Direct workflow task attributes

  • on-success - List of tasks which will run after the task has completed successfully. Optional.
  • on-error - List of tasks which will run after the task has completed with an error. Optional.
  • on-complete - List of tasks which will run after the task has completed regardless of whether it is successful or not. Optional.

Note: All of the above clauses cannot contain task names evaluated as YAQL/Jinja expressions. They have to be static values. However, task transitions can be conditional, based on expressions. See Transitions with expressions for more details.

It is important to understand the semantics of on-success, on-error and on-complete around handling action errors.

In case if task action returned an error on-success and on-complete won’t prevent from failing the entire workflow execution. Only on-error will. The closest analogy is try-catch-finally blocks in regular programming languages. on-error is similar to catch and it serves as an exception handler for possible errors expected by design. Whereas on-complete is like finally that will run in any case but it won’t stop the exception from bubbling up to an upper layer. So on-complete should only be understood as a language construction that allows to define some clean up actions.

Having that said, it’s important to know the order in which these clauses are processed by Mistral.

taskA:
 action: my_action
 on-success:
   - taskB
   - taskC
 on-complete:
   - taskD
   - taskE

In this example, if the task action (‘my_action’) completes successfully then Mistral will first process the ‘on-success’ clause and schedule tasks ‘taskB’ and ‘taskC’ and then process the ‘on-complete’ clause and schedule ‘taskC’ and ‘taskE’. In most cases, this processing order is not so important but there are situations when it matters, especially when both ‘on-success’ and ‘on-complete’ lists have engine commands that are explained later in this document.

If ‘on-success’ and ‘on-error’ are both defined in the task definition, they never clash because they are mutually exclusive which means that only one of them can be processed depending on whether the task action failed or succeeded.

Transitions with expressions

Task transitions can be determined by success/error/completeness of the previous tasks and also by additional guard expressions that can access any data produced by upstream tasks and as workflow input. So in the example above task ‘create_vm’ could also have a YAQL expression on transition to task ‘send_success_email’ as follows:

create_vm:
 ...
 on-success:
   - send_success_email: <% $.vm_id != null %>

And this would tell Mistral to run ‘send_success_email’ task only if ‘vm_id’ variable published by task ‘create_vm’ is not empty. Expressions can also be applied to ‘on-error’ and ‘on-complete’.

Engine Commands

Mistral has a number of engine commands that can be called within direct workflows. These commands are used to change the workflow state.

  • succeed - will end the current workflow and set its state to SUCCESS.
  • pause - will end the current workflow and set its state to PAUSED.
  • fail - will end the current workflow and set its state to ERROR.

Each of the engine commands accepts a msg input. This is optional, but if provided, it will be stored in the state info on the workflow execution.

Workflows that have been ended with succeed or fail may not be resumed later, but workflows that have been ended with pause may be.

YAML example

---
version: '2.0'

send_error_mail:
  tasks:
    create_server:
      action: nova.servers_create name=<% $.vm_name %>
      publish:
        vm_id: <% task().result.id %>
      on-complete:
        - fail: <% not $.vm_id %>

In this example we have a short workflow with one task that creates a server in Nova. The task publishes the ID of the virtual machine, but if this value is empty then it will fail the workflow.

on-complete:
  - taskA
  - fail
  - taskB

When the engine commands are used with task names in a single list, they are processed one at a time until the workflow reaches a terminal state. In the above example, the on-complete has three steps to complete - these are executed in order until the workflow reaches a terminal state. So in this case taskA is scheduled first, then the fail engine command sets the workflow state to ERROR and taskB is never scheduled. taskB would not be scheduled if succeed was used in this example either.

The pause command pauses the workflow. This means that the workflow can continue when its state is set to RUNNING by using the update Rest API call.

YAML example:

on-complete:
  - taskA
  - pause
  - taskB

In this case when Mistral processes the ‘on-complete’ clause it will schedule taskA and then set the workflow state to PAUSED, and stop scheduling new tasks. However, if the workflow is later resumed manually then Mistral will schedule taskB because in the ‘on-complete’ list it goes right after the pause command.

Given the order in which Mistral processes ‘on-success’ (or ‘on-error’) and ‘on-complete’ clauses it’s important to understand what will happen if both clauses have engine commands listed in them.

taskA:
 action: my_action
 on-error:
   - taskB
   - fail
   - taskC
 on-complete:
   - taskD
   - pause
   - taskE

As was explained above, ‘on-complete’ is always processed after ‘on-success’ (or ‘on-error’) because it plays the similar role as ‘finally’ in most general purpose programming languages. Let’s consider two scenarios that can happen in the example above when ‘taskA’ runs, i.e. its action ‘my_action’ runs.

  • If ‘my_action’ fails then Mistral will schedule ‘taskB’ because it’s listed in the ‘on-error’ clause which is processed before the ‘on-complete’ and then will set the state of the workflow to ERROR. This will prevent from scheduling other new tasks so neither ‘taskC’ nor ‘taskD’ and ‘taskE’ will be ever be scheduled. In other words, the whole ‘on-complete’ clause will never be processed because the ‘fail’ command in the ‘on-success’ sets the workflow state to ERROR.
  • If ‘my_action’ succeeds then the ‘on-error’ clause will be ignored and since ‘on-success’ is not defined then Mistral will process the ‘on-complete’ clause. And while doing that, it will schedule ‘taskD’ first and then pause the workflow because of the ‘pause’ command. ‘taskE’ will be scheduled if this workflow is resumed manually at some later time through the API.

This illustrates that, while designing a workflow, it’s important to know precisely how Mistral processes ‘on-success’, ‘on-error’ and ‘on-complete’ and engine commands.

Engine commands and tasks

The on-* clauses in direct workflows can refer both to tasks and engine commands, as demonstrated earlier. It is possible to use the engine commands as names for tasks. For example, one can create a task named noop or fail. These tasks will override the engine commands, that is, the action defined in these tasks will be executed instead of the engine commands. This is a method to succinctly extend the default behavior of the Mistral engine or provide side-effect free workflow examples.

The order in which task names are resolved is the following:

  1. the task with the given name is searched
  2. the engine command with the given name is selected

The first option that matches is executed.

Fork

There are situations when we need to be able to run more than one task after some task has completed.

create_vm:
  ...
  on-success:
    - register_vm_in_load_balancer
    - register_vm_in_dns

In this case Mistral will run both “register_xxx” tasks simultaneously and this will lead to multiple independent workflow routes being processed in parallel.

Join

Join flow control allows to synchronize multiple parallel workflow branches and aggregate their data.

Full Join (join: all)

register_vm_in_load_balancer:
  ...
  on-success:
    - wait_for_all_registrations

register_vm_in_dns:
  ...
  on-success:
    - wait_for_all_registrations

try_to_do_something_without_registration:
  ...
  on-error:
   - wait_for_all_registrations

wait_for_all_registrations:
  join: all
  action: send_email

When a task has property “join” assigned with value “all” the task will run only if all upstream tasks (ones that lead to this task) are completed and corresponding conditions have triggered. Task A is considered an upstream task of Task B if Task A has Task B mentioned in any of its “on-success”, “on-error” and “on-complete” clauses regardless of guard expressions.

Partial Join (join: 2)

register_vm_in_load_balancer:
  ...
  on-success:
    - wait_for_two_registrations

register_vm_in_dns:
  ...
  on-success:
    - wait_for_two_registrations

register_vm_in_zabbix:
  ...
  on-success:
    - wait_for_two_registrations

wait_for_two_registrations:
  join: 2
  action: send_email

When a task has property “join” assigned with a numeric value then the task will run when at least this number of upstream tasks are completed and corresponding conditions have triggered. In the example above task “wait_for_two_registrations” will run if two any of “register_vm_xxx” tasks complete.

Discriminator (join: one)

Discriminator is a special case of Partial Join when “join” property has value 1. It means Mistral will wait for any completed task. In this case instead of 1 it is possible to specify special string value “one” which is introduced for symmetry with “all”. However, it’s up to the user whether to use “1” or “one”.

Reverse workflow

In reverse workflow all relationships in workflow task graph are dependencies. In order to run this type of workflow we need to specify a task that needs to be completed, it can be conventionally called ‘target task’. When Mistral Engine starts a workflow it recursively identifies all the dependencies that need to be completed first.

../_images/Mistral_reverse_workflow.png

Figure 2 explains how reverse workflow works. In the example, task T1 is chosen a target task. So when the workflow starts Mistral will run only tasks T7, T8, T5, T6, T2 and T1 in the specified order (starting from tasks that have no dependencies). Tasks T3 and T4 won’t be a part of this workflow because there’s no route in the directed graph from T1 to T3 or T4.

YAML example

---
version: '2.0'

create_vm_and_send_email:
  type: reverse

  input:
    - vm_name
    - image_id
    - flavor_id

  output:
    result: <% $.vm_id %>

  tasks:
    create_vm:
      action: nova.servers_create name=<% $.vm_name %> image=<% $.image_id %> flavor=<% $.flavor_id %>
      publish:
        vm_id: <% task(create_vm).result.id %>

    search_for_ip:
      action: nova.floating_ips_findall instance_id=null
      publish:
        vm_ip: <% task(search_for_ip).result[0].ip %>

    associate_ip:
      action: nova.servers_add_floating_ip server=<% $.vm_id %> address=<% $.vm_ip %>
      requires: [search_for_ip]

    send_email:
      action: send_email to='admin@mysite.org' body='Vm is created and id <% $.vm_id %> and ip address <% $.vm_ip %>'
      requires: [create_vm, associate_ip]

Reverse workflow task attributes

  • requires - List of tasks which should be executed before this task. Optional.

Processing collections

YAML example

---
version: '2.0'

create_vms:
  description: Creating multiple virtual servers using "with-items".

  input:
    - vm_names
    - image_ref
    - flavor_ref

  output:
    vm_ids: <% $.vm_ids %>

  tasks:
    create_servers:
      with-items: vm_name in <% $.vm_names %>
      action: nova.servers_create name=<% $.vm_name %> image=<% $.image_ref %> flavor=<% $.flavor_ref %>
      publish:
        vm_ids: <% task(create_servers).result.id %>
      on-success:
        - wait_for_servers

    wait_for_servers:
      with-items: vm_id in <% $.vm_ids %>
      action: nova.servers_find id=<% $.vm_id %> status='ACTIVE'
      retry:
        delay: 5
        count: <% $.vm_names.len() * 10 %>

Workflow “create_vms” in this example creates as many virtual servers as we provide in “vm_names” input parameter. E.g., if we specify vm_names=[“vm1”, “vm2”] then it’ll create servers with these names based on same image and flavor. It is possible because of using “with-items” keyword that makes an action or a workflow associated with a task run multiple times. Value of “with-items” task property contains an expression in the form: ‘my_var’ in <% YAQL_expression %>. Similar for Jinja2 expression: ‘my_var’ in {{ Jinja2_expression }}.

The most common form is:

with-items:
  - var1 in <% YAQL_expression_1 %> # or: var1 in <% Jinja2_expression_1 %>
  - var2 in <% YAQL_expression_2 %> # or: var2 in <% Jinja2_expression_2 %>
  ...
  - varN in <% YAQL_expression_N %> # or: varN in <% Jinja2_expression_N %>

where collections expressed as YAQL_expression_1, YAQL_expression_2, YAQL_expression_N must have equal sizes. When a task gets started Mistral will iterate over all collections in parallel, i.e. number of iterations will be equal to length of any collections.

Note that in case of using “with-items” task result accessible in workflow context as <% task(task_name).result %> will be a list containing results of corresponding action/workflow calls. If at least one action/workflow call has failed then the whole task will get into ERROR state. It’s also possible to apply retry policy for tasks with “with-items” property. In this case retry policy will be relaunching all action/workflow calls according to “with-items” configuration. Other policies can also be used the same way as with regular non “with-items” tasks.

Actions

Action defines what exactly needs to be done when task starts. Action is similar to a regular function in general purpose programming language like Python. It has a name and parameters. Mistral distinguishes ‘system actions’ and ‘Ad-hoc actions’.

System actions

System actions are provided by Mistral out of the box and can be used by anyone. It is also possible to add system actions for specific Mistral installation via a special plugin mechanism. Currently, built-in system actions are:

std.fail

This action always fails. It can be used to manually fail a workflow task..

wf:
  tasks:
    manual_fail:
      action: std.fail

The action can be passed the error_data parameter. This data will be used as the action return value.

wf:
  tasks:
    manual_fail:
      action: std.fail
      input: error_data={x:1,y:2}

std.http

Sends an HTTP request.

Input parameters:

  • url - URL for the HTTP request. Required.
  • method - method for the HTTP request. Optional. Default is ‘GET’.
  • params - Dictionary or bytes to be sent in the query string for the HTTP request. Optional.
  • body - Dictionary, bytes, or file-like object to send in the body of the HTTP request. Optional.
  • headers - Dictionary of HTTP Headers to send with the HTTP request. Optional.
  • cookies - Dictionary of HTTP Cookies to send with the HTTP request. Optional.
  • auth - Auth to enable Basic/Digest/Custom HTTP Auth. Optional.
  • timeout - Float describing the timeout of the request in seconds. Optional.
  • allow_redirects - Boolean. Set to True if POST/PUT/DELETE redirect following is allowed. Optional.
  • proxies - Dictionary mapping protocol to the URL of the proxy. Optional.
  • verify - Either a boolean, in which case it controls whether we verify the server’s TLS certificate, or a string, in which case it must be a path to a CA bundle to use. Optional. Default is ‘True’.

Example:

http_task:
  action: std.http url='google.com'

std.mistral_http

This action works just like ‘std.http’ with the only exception: when sending a request it inserts the following HTTP headers:

  • Mistral-Workflow-Name - Name of the workflow that the current action execution is associated with.
  • Mistral-Execution-Id - Identifier of the workflow execution this action is associated with.
  • Mistral-Task-Id - Identifier of the task execution this action execution is associated with.
  • Mistral-Action-Execution-Id - Identifier of the current action execution.

Using this action makes it possible to do any work in asynchronous manner triggered via HTTP protocol. That means that Mistral can send a request using ‘std.mistral_http’ and then any time later whatever system that received this request can notify Mistral back (using its public API) with the result of this action. Header Mistral-Action-Execution-Id is required for this operation because it is used a key to find corresponding action execution in Mistral to attach the result to.

std.email

Sends an email message via SMTP protocol.

  • to_addrs - Comma separated list of recipients. Required.
  • cc_addrs - Comma separated list of CC recipients. Optional.
  • bcc_addrs - Comma separated list of BCC recipients. Optional.
  • reply_to - Comma separated list of email address. Optional.
  • subject - Subject of the message. Optional.
  • body - Text containing message body. Optional.
  • html_body - Text containing the message in HTML format. Optional.
  • from_addr - Sender email address. Required.
  • smtp_server - SMTP server host name. Required.
  • smtp_password - SMTP server password. Required.

Example:

send_email_task:
  action: std.email
  input:
      to_addrs: [admin@mywebsite.org]
      subject: Hello from Mistral :)
      body: |
        Cheers! (:_:)
        -- Thanks, Mistral Team.
      from_addr: mistral@openstack.org
      smtp_server: smtp.google.com
      smtp_password: SECRET

The syntax of ‘std.emal’ action is pretty verbose. However, it can be significantly simplified using Ad-hoc actions. More about them below.

std.ssh

Runs Secure Shell command.

Input parameters:

  • cmd - String containing a shell command that needs to be executed. Required.
  • host - Host name that the command needs to be executed on. Required.
  • username - User name to authenticate on the host. Required.
  • password - User password to to authenticate on the host. Optional.
  • private_key_filename - Private key file name which will be used for authentication on remote host. All private keys should be on the executor host in <home-user-directory>/.ssh directory or absolute path of the key should be provided. The file needs to be accessible for the user account running the executor. Optional.

NOTE: Authentication using key pairs is supported, key should be on Mistral Executor server machine.

std.echo

Simple action mostly needed for testing purposes that returns a predefined result.

Input parameters:

  • output - Value of any type that needs to be returned as a result of the action. Required.

std.javascript

Evaluates given JavaScript code.

NOTE: std.js is an alias for std.javascript i.e, std.js can be used in place of std.javascript.

Input parameters:

  • script - The text of JavaScript snippet that needs to be executed. Required.
  • context - This object will be assigned to the $ javascript variable. The default value is None.

To use std.javascript, it is needed to install the py_mini_racer and set py_mini_racer to js_implementation parameter in mistral.conf:

pip install py_mini_racer

Other available implementations:

Example with context:

---
version: '2.0'

generate_uuid:
  description: Generates a Universal Unique ID

  input:
    - radix: 16

  output:
    uuid: <% $.generated_uuid %>

  tasks:
    generate_uuid_task:
      action: std.js
      input:
        context: <% $ %>
        script: |
          return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
                  var r = Math.random() * 16 | 0, v = c == 'x' ? r : (r&0x3|0x8);
                  return v.toString($.radix);
          });
      publish:
        generated_uuid: <% task().result %>

Another example for getting the current date and time:

---
version: '2.0'

get_date_workflow:
  description: Get the current date

  output:
    current_date: <% $.current_date %>

  tasks:
    get_date_task:
      action: std.js
      input:
        script: |
          var date = new Date();
          return date; // returns "2015-07-12T10:32:12.460000" or use date.toLocaleDateString() for "Sunday, July 12, 2015"
      publish:
        current_date: <% task().result %>

Ad-hoc actions

Ad-hoc action is a special type of action that can be created by user. Ad-hoc action is always created as a wrapper around any other existing system action and its main goal is to simplify using same actions many times with similar pattern.

YAML example

---
version: '2.0'

error_email:
  input:
    - execution_id
  base: std.email
  base-input:
    to_addrs: ['admin@mywebsite.org']
    subject: 'Something went wrong with your Mistral workflow :('
    body: |
        Please take a look at Mistral Dashboard to find out what's wrong
        with your workflow execution <% $.execution_id %>.
        Everything's going to be alright!
        -- Sincerely, Mistral Team.
    from_addr: 'mistral@openstack.org'
    smtp_server: 'smtp.google.com'
    smtp_password: 'SECRET'

Once this action is uploaded to Mistral any workflow will be able to use it as follows:

my_workflow:
  tasks:
    ...
    send_error_email:
      action: error_email execution_id=<% execution().id %>

Attributes

  • base - Name of base action that this action is built on top of. Required.
  • base-input - Actual input parameters provided to base action. Look at the example above. Optional.
  • input - List of declared action parameters which should be specified as corresponding task input. This attribute is optional and used only for documenting purposes. Mistral now does not enforce actual input parameters to exactly correspond to this list. Base parameters will be calculated based on provided actual parameters with using expressions so what’s used in expressions implicitly define real input parameters. Dictionary of actual input parameters (expression context) is referenced as ‘$.’ in YAQL and as ‘_.’ in Jinja. Redundant parameters will be simply ignored.
  • output - Any data structure defining how to calculate output of this action based on output of base action. It can optionally have expressions to access properties of base action output through expression context.

Workbooks

As mentioned before, workbooks still exist in Mistral Workflow Language version 2 but purely for convenience. Using workbooks users can combine multiple entities of any type (workflows, actions and triggers) into one document and upload to Mistral service. When uploading a workbook Mistral will parse it and save its workflows, actions and triggers as independent objects which will be accessible via their own API endpoints (/workflows, /actions and /triggers/). Once it’s done the workbook comes out of the game. User can just start workflows and use references to workflows/actions/triggers as if they were uploaded without workbook in the first place. However, if we want to modify these individual objects we can modify the same workbook definition and re-upload it to Mistral (or, of course, we can do it independently).

Namespacing

One thing that’s worth noting is that when using a workbook Mistral uses its name as a prefix for generating final names of workflows, actions and triggers included into the workbook. To illustrate this principle let’s take a look at the figure below.

../_images/Mistral_workbook_namespacing.png

So after a workbook has been uploaded its workflows and actions become independent objects but with slightly different names.

YAML example

---
version: '2.0'

name: my_workbook

description: My set of workflows and ad-hoc actions

workflows:
  local_workflow1:
    type: direct

    tasks:
      task1:
        action: local_action str1='Hi' str2=' Mistral!'
        on-complete:
          - task2

      task2:
        action: global_action
        ...

  local_workflow2:
    type: reverse

    tasks:
      task1:
        workflow: local_workflow1

      task2:
        workflow: global_workflow param1='val1' param2='val2'
        requires: [task1]
        ...
actions:
  local_action:
    input:
      - str1
      - str2
    base: std.echo output="<% $.str1 %><% $.str2 %>"

NOTE: Even though names of objects inside workbooks change upon uploading Mistral allows referencing between those objects using local names declared in the original workbook.

Attributes

  • name - Workbook name. Required.
  • description - Workbook description. Optional.
  • tags - String with arbitrary comma-separated values. Optional.
  • workflows - Dictionary containing workflow definitions. Optional.
  • actions - Dictionary containing ad-hoc action definitions. Optional.

Predefined values/Functions in execution data context

Using expressions it is possible to use some predefined values in Mistral Workflow Language.

  • OpenStack context
  • Task result
  • Execution info
  • Environment

OpenStack context

OpenStack context is available by $.openstack. It contains auth_token, project_id, user_id, service_catalog, user_name, project_name, roles, is_admin properties.

Builtin functions in expressions

In addition to the current context (i.e. $ in YAQL and _ in Jinja2) expressions have access to a set of predefined functions.

The expression languages come with their own individual included functions and operations. Mistral adds the following functions that are available in all the supported languages.

This section will describe builtin functions added by Mistral.

Tasks function

Signature:
tasks(workflow_execution_id=null, recursive=false, state=null, flat=false)

Description:

This function allows users to filter all tasks by workflow execution id and/or state. In addition, it is possible to get task executions recursively and flatten the task executions list.

Parameters:

  1. workflow_execution_id - If provided the tasks function will return task executions for a specific workflow execution (either the current execution or a different one). Otherwise it will return all task executions that match the other parameters. Optional.

  2. recursive - This parameter is a boolean value, if it is true then all task executions within nested workflow executions will be returned. This is usually used in combination with a specific workflow_execution_id where you still want to see nested workflow’s task executions. Optional. False by default.

  3. state - If provided, the task executions will be filtered by their current state. If state isn’t provided, all task executions that match the other parameters will be returned . Optional.

  4. flat - if true, only list the task executions that match at least one of the next conditions:

    • task executions of type action
    • task executions of type workflow that have a different state from the workflow execution they triggered. For example, if used with a specific workflow_execution_id and the state ERROR it will return tasks that erred despite the workflow succeeding. This can mean that there was an error in the task itself, like an invalid expression in publish.

    Optional. False by default.

Example:

Workflow definition:

---
version: "v2.0"
wf:
  tasks:
    task:
      action: std.noop
      publish:
        all_tasks_in_this_wf_yaql: <% tasks(execution().id) %>
        all_tasks_in_this_wf_jinja: "{{ tasks(execution().id) }}"

        all_tasks_in_error_yaql: <% tasks(null, false, ERROR) %>
        all_tasks_in_error_jinja: "{{ tasks(None, false, 'ERROR') }}"
        all_tasks_in_error_yaql_with_kw: <% tasks(state => ERROR) %>
        all_tasks_in_error_jinja_with_kw: "{{ tasks(state='ERROR') }}"

        all_tasks_yaql_option1: <% tasks() %>
        all_tasks_yaql_option2: <% tasks(null, false, null, false) %>
        all_tasks_jinja_option1: "{{ tasks() }}"
        all_tasks_jinja_option2: "{{ tasks(None, false, None, false) }}"

Task publish result (partial to keep the documentation short):

Warning

The return value for each task execution hasn’t been finalized and isn’t considered stable. It may change in a future Mistral release.

{
    "all_tasks_in_error_yaql": [
        {
            "id": "3d363d4b-8c19-48fa-a9a0-8721dc5469f2",
            "name": "fail_task",
            "type": "ACTION",
            "workflow_execution_id": "c0a4d2ff-0127-4826-8370-0570ef8cad80",
            "state": "ERROR",
            "state_info": "Failed to run action [action_ex_id=bcb04b28-6d50-458e-9b7e-a45a5ff1ca01, action_cls='<class 'mistral.actions.action_factory.FailAction'>', attributes='{}', params='{}']\n Fail action expected exception.",
            "result": "Failed to run action [action_ex_id=bcb04b28-6d50-458e-9b7e-a45a5ff1ca01, action_cls='<class 'mistral.actions.action_factory.FailAction'>', attributes='{}', params='{}']\n Fail action expected exception.",
            "published": {},
            "spec": {
                "action": "std.fail",
                "version": "2.0",
                "type": "direct",
                "name": "fail_task"
            }
        }
    ],
    "all_tasks_in_this_wf_jinja": [
        {
            "id": "83a34bfe-268c-46f5-9e5c-c16900540084",
            "name": "task",
            "type": "ACTION",
            "workflow_execution_id": "899a3318-b5c0-4860-82b4-a5bd147a4643",
            "state": "SUCCESS",
            "state_info": null,
            "result": null,
            "published": {},
            "spec": {
                "action": "std.noop",
                "version": "2.0",
                "type": "direct",
                "name": "task",
                "publish": {
                    "all_tasks_in_error_yaql": "<% tasks(null, false, ERROR) %>",
                    "all_tasks_in_error_jinja": "{{ tasks(None, false, 'ERROR') }}",
                    "all_tasks_yaql_option2": "<% tasks(null, false, false, false) %>",
                    "all_tasks_yaql_option1": "<% tasks() %>",
                    "all_tasks_jinja_option1": "{{ tasks() }}",
                    "all_tasks_in_error_jinja_with_kw": "{{ tasks(state='ERROR') }}",
                    "all_tasks_jinja_option2": "{{ tasks(None, false, None, false) }}",
                    "all_tasks_in_this_wf_jinja": "{{ tasks(execution().id) }}",
                    "all_tasks_in_this_wf_yaql": "<% tasks(execution().id) %>"
                }
            }
        }
    ],
    "_comment": "other fields were dropped to keep docs short"
}

Task result

Task result is available by task(<task_name>).result. It contains task result and directly depends on action output structure. Note that the task(<task_name>) function itself returns more than only task result. It returns the following fields of task executions:

  • id - task execution UUID.
  • name - task execution name.
  • spec - task execution spec dict (loaded from Mistral Workflow Language).
  • state - task execution state.
  • state_info - task execution state info.
  • result - task execution result. In case of a non ‘with-items’ task it’s simply a result of the task’s action/sub-workflow execution. For a ‘with-items’ task it will be a list of results of corresponding action/sub-workflow execution.
  • published - task execution published variables.

Execution info

Execution info is available by execution(). It contains information about execution itself such as id, wf_spec, input, start_params, and root_execution_id .

Executions function

Signature:
executions(id=null, root_execution_id=null, state=null, from_time=null, to_time=null)

Description:

This function allows users to filter all executions by execution id, root_execution_id ,state and/or created_at time.

Parameters:

  1. id - If provided will return a list of executions with that id. Otherwise it will return all executions that match the other parameters. Optional.
  2. root_execution_id - Similar to id above, if provided will return a list of executions with that root_execution_id. Otherwise it will return all executions that match the other parameters. Optional. False by default.
  3. state - If provided, the executions will be filtered by their current state. If state isn’t provided, all executions that match the other parameters will be returned . Optional.
  4. from_time - If provided, the executions will be filtered by their created_at time being greater or equal to the from_time parameter. If from_time isn’t provided, all executions that match the other parameters will be returned. from_time parameter can be provided in the format YYYY-MM-DD hh:mm:ss Optional.
  5. to_time - If provided, the executions will be filtered by their created_at time being less than to the from_time parameter (less than but not less than equal as the from_time parameter does) If to_time isn’t provided, all executions that match the other parameters will be returned. to_time parameter can be provided in the format YYYY-MM-DD hh:mm:ss Optional.

Example:

Workflow definition:

---
version: "v2.0"
wf:
  tasks:
    task:
      action: std.noop
      publish:
        all_executions_yaql: <% executions() %>
        all_child_executions_of_this_execution: "{{ executions(root_execution_id=execution().id) }}"

        all_executions_in_error_yaql: <% executions(null, null, ERROR) %>
        all_executions_in_error_jinja: "{{ executions(None, None, 'ERROR') }}"
        all_executions_in_error_yaql_with_kw: <% executions(state => ERROR) %>
        all_executions_in_error_jinja_with_kw: "{{ executions(state='ERROR') }}"

        all_executions_filtered_date_jinja: "{{ executions(to_time="2016-12-01 15:01:00") }}"

Environment

Environment info is available by env(). It is passed when user submits workflow execution. It contains variables specified by user.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.