Mistral Installation Guide

Mistral Installation Guide

Prerequisites

It is necessary to install some specific system libs for installing Mistral. They can be installed on most popular operating system using their package manager (for Ubuntu - apt, for Fedora - dnf, CentOS - yum, for Mac OS - brew or macports). The list of needed packages is shown below:

  1. python-dev
  2. python-setuptools
  3. python-pip
  4. libffi-dev
  5. libxslt1-dev (or libxslt-dev)
  6. libxml2-dev
  7. libyaml-dev
  8. libssl-dev

In case of Ubuntu, just run:

$ apt-get install python-dev python-setuptools python-pip libffi-dev \
  libxslt1-dev libxml2-dev libyaml-dev libssl-dev

NOTE: Mistral can be used without authentication at all or it can work with OpenStack. In case of OpenStack, it works only on Keystone v3, make sure Keystone v3 is installed.

Installation

NOTE: If it is needed to install Mistral using devstack, please refer to Mistral Devstack Installation

First of all, clone the repo and go to the repo directory:

$ git clone https://github.com/openstack/mistral.git
$ cd mistral

Generate config:

$ tox -egenconfig

Configure Mistral as needed. The configuration file is located in etc/mistral.conf.sample. You will need to modify the configuration options and then copy it into /etc/mistral/mistral.conf. For details see Mistral Configuration Guide

Virtualenv installation:

$ tox

This will install necessary virtual environments and run all the project tests. Installing virtual environments may take significant time (~10-15 mins).

Local installation:

$ pip install -e .

or:

$ pip install -r requirements.txt
$ python setup.py install

NOTE: Differences pip install -e and setup.py install. pip install -e works very similarly to setup.py install or the EasyInstall tool, except that it doesn’t actually install anything. Instead, it creates a special .egg-link file in the deployment directory, that links to your project’s source code.

Before the first run

After installation you will see mistral-server and mistral-db-manage commands in your environment, either in system or virtual environment.

NOTE: In case of using virtualenv, all Mistral related commands available via tox -evenv –. For example, mistral-server is available via tox -evenv – mistral-server.

mistral-db-manage command can be used for migrations.

For updating the database to the latest revision type:

$ mistral-db-manage --config-file <path-to-mistral.conf> upgrade head

Before starting Mistral server, run mistral-db-manage populate command. It prepares the DB, creates in it with all standard actions and standard workflows which Mistral provides for all Mistral users.:

$ mistral-db-manage --config-file <path-to-mistral.conf> populate

For more detailed information about mistral-db-manage script please see Mistral Upgrade Guide.

NOTE: For users who want a dry run with SQLite database backend(not used in production), mistral-db-manage is not recommended for database initialization because of SQLite limitations. Please use sync_db script described below instead for database initialization.

If you use virtualenv:

$ tools/sync_db.sh --config-file <path-to-mistral.conf>

Or run sync_db directly:

$ python tools/sync_db.py --config-file <path-to-mistral.conf>

Running Mistral API server

To run Mistral API server perform the following command in a shell:

$ mistral-server --server api --config-file <path-to-mistral.conf>

Running Mistral Engines

To run Mistral Engine perform the following command in a shell:

$ mistral-server --server engine --config-file <path-to-mistral.conf>

Running Mistral Task Executors

To run Mistral Task Executor instance perform the following command in a shell:

$ mistral-server --server executor --config-file <path-to-mistral.conf>

Note that at least one Engine instance and one Executor instance should be running so that workflow tasks are processed by Mistral.

Running Multiple Mistral Servers Under the Same Process

To run more than one server (API, Engine, or Task Executor) on the same process, perform the following command in a shell:

$ mistral-server --server api,engine --config-file <path-to-mistral.conf>

The –server command line option can be a comma delimited list. The valid options are “all” (by default if not specified) or any combination of “api”, “engine”, and “executor”. It’s important to note that the “fake” transport for the rpc_backend defined in the config file should only be used if “all” the Mistral servers are launched on the same process. Otherwise, messages do not get delivered if the Mistral servers are launched on different processes because the “fake” transport is using an in process queue.

Mistral And Docker

Please first refer installation steps for docker. To build the image from the mistral source, change directory to the root directory of the Mistral git repository and run:

$ docker build -t <Name of image> .

In case you want pre-built image, you can download it from openstack tarballs source.

To load this image to docker registry, please run following command:

$ docker load -i '<path of mistral-docker.tar.gz>'

The Mistral Docker image is configured to store the database in the user’s home directory. For persistence of these data, you may want to keep this directory outside of the container. This may be done by the following steps:

$ sudo mkdir '<user-defined-directory>'
$ docker run -it -v \
  '<user-defined-directory>':/home/mistral <Name of image>

More about docker: https://www.docker.com/

NOTE: This docker image uses SQLite database. So, it cannot be used for production environment. If you want to use this for production environment, then put customized mistral.conf to ‘<user-defined-directory>’.

Mistral Client Installation

Please refer to Mistral Client / CLI Guide

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.