Magnum Configuration Options¶
The following is a sample Magnum configuration for adaptation and use. It is auto-generated from Magnum when this documentation is built, so if you are having issues with an option, please compare your version of Magnum with the version of this documentation.
The sample configuration can also be viewed in file form.
[DEFAULT]
#
# From magnum.conf
#
# Directory where the magnum python module is installed. (string value)
#pybasedir = /home/zuul/src/opendev.org/openstack/magnum/magnum
# Directory where magnum binaries are installed. (string value)
#bindir = $pybasedir/bin
# Top-level directory for maintaining magnum's state. (string value)
#state_path = $pybasedir
# Enable periodic tasks. (boolean value)
#periodic_enable = true
# Max interval size between periodic tasks execution in seconds. (integer
# value)
#periodic_interval_max = 60
# Name of this node. This can be an opaque identifier. It is not necessarily a
# hostname, FQDN, or IP address. However, the node name must be valid within an
# AMQP key, and if using ZeroMQ, a valid hostname, FQDN, or IP address. (host
# address value)
#host = <None>
# Path to the rootwrap configuration file to use for running commands as root.
# (string value)
#rootwrap_config = /etc/magnum/rootwrap.conf
# Explicitly specify the temporary working directory. (string value)
#tempdir = <None>
# Symbols to use for passwords (list value)
#password_symbols = 23456789,ABCDEFGHJKLMNPQRSTUVWXYZ,abcdefghijkmnopqrstuvwxyz
# Max interval size between periodic tasks execution in seconds. (integer
# value)
#service_down_time = 180
# Maximum raw byte size of any manifest. (integer value)
#max_manifest_size = 524288
#
# From oslo.log
#
# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false
# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, log-date-format). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>
# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S
# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>
# (Optional) The base directory used for relative log_file paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>
# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
#watch_log_file = false
# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false
# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol
# which includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false
# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER
# Use JSON formatting for logging. This option is ignored if log_config_append
# is set. (boolean value)
#use_json = false
# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false
# DEPRECATED: Log output to Windows Event Log. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Windows support is no longer maintained.
#use_eventlog = false
# The amount of time before the log files are rotated. This option is ignored
# unless log_rotation_type is set to "interval". (integer value)
#log_rotate_interval = 1
# Rotation interval type. The time of the last file change (or the time when
# the service was started) is used when scheduling the next rotation. (string
# value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days
# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30
# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
# not set to "size". (integer value)
#max_logfile_size_mb = 200
# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none
# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s
# Format string to use for log messages when context is undefined. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
# Additional data to append to log message when logging level for the message
# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
# Prefix each line of exception output with this format. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_user_identity_format = %(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s
# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
# Enables or disables publication of error events. (boolean value)
#publish_errors = false
# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "
# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "
# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0
# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0
# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
# or empty string. Logs with level greater or equal to rate_limit_except_level
# are not filtered. An empty string means that all levels are filtered. (string
# value)
#rate_limit_except_level = CRITICAL
# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false
#
# From oslo.messaging
#
# Size of RPC connection pool. (integer value)
# Minimum value: 1
#rpc_conn_pool_size = 30
# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2
# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200
# Size of executor thread pool when executor is threading or eventlet. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64
# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60
# The network address and optional user credentials for connecting to the
# messaging backend, in URL format. The expected format is:
#
# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
#
# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
#
# For full details on the fields in the URL see the documentation of
# oslo_messaging.TransportURL at
# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
# (string value)
#transport_url = rabbit://
# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = openstack
# Add an endpoint to answer to ping calls. Endpoint is named
# oslo_rpc_server_ping (boolean value)
#rpc_ping_enabled = false
#
# From oslo.service.periodic_task
#
# Some periodic tasks can be run in a separate process. Should we run them
# here? (boolean value)
#run_external_periodic_tasks = true
#
# From oslo.service.service
#
# Enable eventlet backdoor. Acceptable values are 0, <port>, and
# <start>:<end>, where 0 results in listening on a random tcp port number;
# <port> results in listening on the specified port number (and not enabling
# backdoor if that port is in use); and <start>:<end> results in listening on
# the smallest unused port number within the specified range of port numbers.
# The chosen port is displayed in the service's log file. (string value)
#backdoor_port = <None>
# Enable eventlet backdoor, using the provided path as a unix socket that can
# receive connections. This option is mutually exclusive with 'backdoor_port'
# in that only one should be provided. If both are provided then the existence
# of this option overrides the usage of that option. Inside the path {pid} will
# be replaced with the PID of the current process. (string value)
#backdoor_socket = <None>
# Enables or disables logging values of all registered options when starting a
# service (at DEBUG level). (boolean value)
#log_options = true
# Specify a timeout after which a gracefully shutdown server will exit. Zero
# value means endless wait. (integer value)
#graceful_shutdown_timeout = 60
[api]
#
# From magnum.conf
#
# The port for the Magnum API server. (port value)
# Minimum value: 0
# Maximum value: 65535
#port = 9511
# The listen IP for the Magnum API server. (IP address value)
#host = 127.0.0.1
# The maximum number of items returned in a single response from a collection
# resource. (integer value)
#max_limit = 1000
# Configuration file for WSGI definition of API. (string value)
#api_paste_config = api-paste.ini
# This option allows setting path to the SSL certificate of API server.
# (string value)
#ssl_cert_file = <None>
# This option specifies the path to the file where SSL private key of API
# server is stored when SSL is in effect. (string value)
#ssl_key_file = <None>
# Enable SSL Magnum API service (boolean value)
#enabled_ssl = false
# The maximum number of magnum-api processes to fork and run. Default to number
# of CPUs on the host. (integer value)
#workers = <None>
[barbican_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
[certificates]
#
# From magnum.conf
#
# Certificate Manager plugin. Defaults to barbican. (string value)
#cert_manager_type = barbican
# Absolute path of the certificate storage directory. Defaults to
# /var/lib/magnum/certificates/. (string value)
#storage_path = /var/lib/magnum/certificates/
[cinder]
#
# From magnum.conf
#
# The default docker volume_type to use for volumes used for docker storage. To
# use the cinder volumes for docker storage, you need to select a default
# value. Otherwise, Magnum will select random one from Cinder volume type list.
# (string value)
#default_docker_volume_type =
# The default etcd volume_type to use for volumes used for etcd storage. To use
# the cinder volumes for etcd storage, you need to select a default value.
# Otherwise, Magnum will select random one from Cinder volume type list.
# (string value)
#default_etcd_volume_type =
# The default boot volume_type to use for volumes used for VM of COE. To use
# the cinder volumes for VM of COE, you need to select a default value.
# Otherwise, Magnum will select random one from Cinder volume type list.
# (string value)
#default_boot_volume_type =
# The default volume size to use for volumes used for VM of COE. (integer
# value)
#default_boot_volume_size = 0
[cinder_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
# Version of Cinder API to use in cinderclient. (string value)
#api_version = 3
[cluster]
#
# From magnum.conf
#
# Url for etcd public discovery endpoint. (string value)
#etcd_discovery_service_endpoint_format = https://discovery.etcd.io/new?size=%(size)d
# DEPRECATED: Enabled cluster definition entry points. (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This configuration option is no longer used. Installing a new driver
# enables it for use automatically.
#enabled_definitions = magnum_vm_atomic_k8s,magnum_bm_fedora_k8s,magnum_vm_coreos_k8s,magnum_vm_atomic_swarm,magnum_vm_ubuntu_mesos
# Affinity policy for server group of cluster nodes. Possible values include
# "affinity", "anti-affinity", "soft-affinity" and "soft-anti-affinity".
# (string value)
#nodes_affinity_policy = soft-anti-affinity
# Explicitly specify the temporary directory to hold cached TLS certs. (string
# value)
#temp_cache_dir = /var/lib/magnum/certificate-cache
# The timeout in seconds to wait for the load balancers to be deleted. (integer
# value)
#pre_delete_lb_timeout = 60
[cluster_heat]
#
# From magnum.conf
#
# Number of attempts to query the Heat stack for finding out the status of the
# created stack and getting template outputs. This value is ignored during
# cluster creation if timeout is set as the poll will continue until cluster
# creation either ends or times out. (integer value)
#max_attempts = 2000
# Sleep time interval between two attempts of querying the Heat stack. This
# interval is in seconds. (integer value)
#wait_interval = 1
# The length of time to let cluster creation continue. This interval is in
# minutes. The default is 60 minutes. (integer value)
# Deprecated group/name - [bay_heat]/bay_create_timeout
#create_timeout = 60
[cluster_template]
#
# From magnum.conf
#
# Allowed network drivers for kubernetes cluster-templates. Use 'all' keyword
# to allow all drivers supported for kubernetes cluster-templates. Supported
# network drivers include flannel. (list value)
#kubernetes_allowed_network_drivers = all
# Default network driver for kubernetes cluster-templates. (string value)
#kubernetes_default_network_driver = flannel
# Allowed network drivers for docker swarm cluster-templates. Use 'all' keyword
# to allow all drivers supported for swarm cluster-templates. Supported network
# drivers include docker and flannel. (list value)
#swarm_allowed_network_drivers = all
# Default network driver for docker swarm cluster-templates. (string value)
#swarm_default_network_driver = docker
# Allowed network drivers for mesos cluster-templates. Use 'all' keyword to
# allow all drivers supported for mesos cluster-templates. Supported network
# drivers include docker. (list value)
#mesos_allowed_network_drivers = all
# Default network driver for mesos cluster-templates. (string value)
#mesos_default_network_driver = docker
[conductor]
#
# From magnum.conf
#
# The queue to add conductor tasks to. (string value)
#topic = magnum-conductor
# RPC timeout for the conductor liveness check that is used for cluster
# locking. (integer value)
#conductor_life_check_timeout = 4
# Number of magnum-conductor processes to fork and run. Default to number of
# CPUs on the host. (integer value)
#workers = <None>
[cors]
#
# From oslo.middleware.cors
#
# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
# slash. Example: https://horizon.example.com (list value)
#allowed_origin = <None>
# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true
# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers =
# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600
# Indicate which methods can be used during the actual request. (list value)
#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers =
[database]
#
# From magnum.conf
#
# MySQL engine to use. (string value)
#mysql_engine = InnoDB
#
# From oslo.db
#
# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true
# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy
# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>
# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>
# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set
# by the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL
# For Galera only, configure wsrep_sync_wait causality checks on new
# connections. Default is None, meaning don't configure any setting. (integer
# value)
#mysql_wsrep_sync_wait = <None>
# Connections which have been present in the connection pool longer than this
# number of seconds will be replaced with a new one the next time they are
# checked out from the pool. (integer value)
#connection_recycle_time = 3600
# Maximum number of SQL connections to keep open in a pool. Setting a value of
# 0 indicates no limit. (integer value)
#max_pool_size = 5
# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10
# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10
# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50
# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0
# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false
# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>
# Enable the experimental use of database reconnect on connection lost.
# (boolean value)
#use_db_reconnect = false
# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1
# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true
# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10
# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20
# Optional URL parameters to append onto the connection URL at connect time;
# specify as param1=value1¶m2=value2&... (string value)
#connection_parameters =
[docker]
#
# From magnum.conf
#
# Docker remote api version. Override it according to specific docker api
# version in your environment. (string value)
#docker_remote_api_version = 1.21
# Default timeout in seconds for docker client operations. (integer value)
#default_timeout = 60
# If set, ignore any SSL validation issues (boolean value)
#api_insecure = false
# Location of CA certificates file for securing docker api requests
# (tlscacert). (string value)
#ca_file = <None>
# Location of TLS certificate file for securing docker api requests (tlscert).
# (string value)
#cert_file = <None>
# Location of TLS private key file for securing docker api requests (tlskey).
# (string value)
#key_file = <None>
[docker_registry]
#
# From magnum.conf
#
# Region name of Swift (string value)
#swift_region = <None>
# Name of the container in Swift which docker registry stores images in (string
# value)
#swift_registry_container = docker_registry
[drivers]
#
# From magnum.conf
#
# Indicates whether the cluster nodes validate the Certificate Authority when
# making requests to the OpenStack APIs (Keystone, Magnum, Heat). If you have
# self-signed certificates for the OpenStack APIs or you have your own
# Certificate Authority and you have not installed the Certificate Authority to
# all nodes, you may need to disable CA validation by setting this flag to
# False. (boolean value)
#verify_ca = true
# Path to the OpenStack CA-bundle file to pass and install in all cluster
# nodes. (string value)
#openstack_ca_file =
# DEPRECATED: Allow periodic tasks to pull COE data and send to ceilometer.
# (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: It does not make sense only collecting metrics from the "default"
# namespcae.
#send_cluster_metrics = false
# Disabled driver entry points. The default value is []. Means if not
# specified, then all available drivers are enabled. (list value)
#disabled_drivers =
[glance_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
# Version of Glance API to use in glanceclient. (string value)
#api_version = 2
# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>
# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>
# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>
# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false
[heat_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
# Version of Heat API to use in heatclient. (string value)
#api_version = 1
# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>
# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>
# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>
# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false
[keystone_auth]
#
# From magnum.conf
#
# Authentication type to load (string value)
# Deprecated group/name - [keystone_auth]/auth_plugin
#auth_type = <None>
# Config Section from which to load plugin specific options (string value)
#auth_section = <None>
# Authentication URL (string value)
#auth_url = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [keystone_auth]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [keystone_auth]/tenant_name
#project_name = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# Optional domain ID to use with v3 and v2 parameters. It will be used for both
# the user and project domain in v3 and ignored in v2 authentication. (string
# value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2 authentication.
# (string value)
#default_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [keystone_auth]/user_name
#username = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User's password (string value)
#password = <None>
[keystone_authtoken]
#
# From keystonemiddleware.auth_token
#
# Complete "public" Identity API endpoint. This endpoint should not be an
# "admin" endpoint, as it should be accessible by all end users.
# Unauthenticated clients are redirected to this endpoint to authenticate.
# Although this endpoint should ideally be unversioned, client support in the
# wild varies. If you're using a versioned v2 endpoint here, then this should
# *not* be the same endpoint the service user utilizes for validating tokens,
# because normal end users may not be able to reach that endpoint. (string
# value)
# Deprecated group/name - [keystone_authtoken]/auth_uri
#www_authenticate_uri = <None>
# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
# be an "admin" endpoint, as it should be accessible by all end users.
# Unauthenticated clients are redirected to this endpoint to authenticate.
# Although this endpoint should ideally be unversioned, client support in the
# wild varies. If you're using a versioned v2 endpoint here, then this should
# *not* be the same endpoint the service user utilizes for validating tokens,
# because normal end users may not be able to reach that endpoint. This option
# is deprecated in favor of www_authenticate_uri and will be removed in the S
# release. (string value)
# This option is deprecated for removal since Queens.
# Its value may be silently ignored in the future.
# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
# and will be removed in the S release.
#auth_uri = <None>
# API version of the Identity API endpoint. (string value)
#auth_version = <None>
# Interface to use for the Identity API endpoint. Valid values are "public",
# "internal" (default) or "admin". (string value)
#interface = internal
# Do not handle authorization requests within the middleware, but delegate the
# authorization decision to downstream WSGI components. (boolean value)
#delay_auth_decision = false
# Request timeout value for communicating with Identity API server. (integer
# value)
#http_connect_timeout = <None>
# How many times are we trying to reconnect when communicating with Identity
# API Server. (integer value)
#http_request_max_retries = 3
# Request environment key where the Swift cache object is stored. When
# auth_token middleware is deployed with a Swift cache, use this option to have
# the middleware share a caching backend with swift. Otherwise, use the
# ``memcached_servers`` option instead. (string value)
#cache = <None>
# Required if identity server requires client certificate (string value)
#certfile = <None>
# Required if identity server requires client certificate (string value)
#keyfile = <None>
# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
# Defaults to system CAs. (string value)
#cafile = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# The region in which the identity server can be found. (string value)
#region_name = <None>
# Optionally specify a list of memcached server(s) to use for caching. If left
# undefined, tokens will instead be cached in-process. (list value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
#memcached_servers = <None>
# In order to prevent excessive effort spent validating tokens, the middleware
# caches previously-seen tokens for a configurable duration (in seconds). Set
# to -1 to disable caching completely. (integer value)
#token_cache_time = 300
# (Optional) If defined, indicate whether token data should be authenticated or
# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
# cache. If the value is not one of these options or empty, auth_token will
# raise an exception on initialization. (string value)
# Possible values:
# None - <No description provided>
# MAC - <No description provided>
# ENCRYPT - <No description provided>
#memcache_security_strategy = None
# (Optional, mandatory if memcache_security_strategy is defined) This string is
# used for key derivation. (string value)
#memcache_secret_key = <None>
# (Optional) Number of seconds memcached server is considered dead before it is
# tried again. (integer value)
#memcache_pool_dead_retry = 300
# (Optional) Maximum total number of open connections to every memcached
# server. (integer value)
#memcache_pool_maxsize = 10
# (Optional) Socket timeout in seconds for communicating with a memcached
# server. (integer value)
#memcache_pool_socket_timeout = 3
# (Optional) Number of seconds a connection to memcached is held unused in the
# pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60
# (Optional) Number of seconds that an operation will wait to get a memcached
# client connection from the pool. (integer value)
#memcache_pool_conn_get_timeout = 10
# (Optional) Use the advanced (eventlet safe) memcached client pool. (boolean
# value)
#memcache_use_advanced_pool = true
# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
# middleware will not ask for service catalog on token validation and will not
# set the X-Service-Catalog header. (boolean value)
#include_service_catalog = true
# Used to control the use and type of token binding. Can be set to: "disabled"
# to not check token binding. "permissive" (default) to validate binding
# information if the bind type is of a form known to the server and ignore it
# if not. "strict" like "permissive" but if the bind type is unknown the token
# will be rejected. "required" any form of token binding is needed to be
# allowed. Finally the name of a binding method that must be present in tokens.
# (string value)
#enforce_token_bind = permissive
# A choice of roles that must be present in a service token. Service tokens are
# allowed to request that an expired token can be used and so this check should
# tightly control that only actual services should be sending this token. Roles
# here are applied as an ANY check so any role in this list must be present.
# For backwards compatibility reasons this currently only affects the
# allow_expired check. (list value)
#service_token_roles = service
# For backwards compatibility reasons we must let valid service tokens pass
# that don't pass the service_token_roles check as valid. Setting this true
# will become the default in a future release and should be enabled if
# possible. (boolean value)
#service_token_roles_required = false
# The name or type of the service as it appears in the service catalog. This is
# used to validate tokens that have restricted access rules. (string value)
#service_type = <None>
# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
#auth_type = <None>
# Config Section from which to load plugin specific options (string value)
#auth_section = <None>
[kubernetes]
#
# From magnum.conf
#
# Explicitly specify the path to the file defined default Keystone auth policy
# for Kubernetes cluster when the Keystone auth is enabled. Vendors can put
# their specific default policy here (string value)
#keystone_auth_default_policy = /etc/magnum/keystone_auth_default_policy.json
# An URL of the manifest file will be installed after the Kubernetes cluster
# created. For exmaple, this could be a file including the vendor specific
# storage class. (string value)
#post_install_manifest_url =
# The default polling interval for Kubernetes cluster health. If this number is
# negative the periodic task will be disabled. (integer value)
#health_polling_interval = 60
[magnum_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
[neutron_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>
# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>
# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>
# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false
[nova_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
# Version of Nova API to use in novaclient. (string value)
#api_version = 2
# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>
# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>
# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>
# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false
[octavia_client]
#
# From magnum.conf
#
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#region_name = <None>
# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL
# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>
# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>
# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>
# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false
[oslo_concurrency]
#
# From oslo.concurrency
#
# Enables or disables inter-process locks. (boolean value)
#disable_process_locking = false
# Directory to use for lock files. For security, the specified directory
# should only be writable by the user running the processes that need locking.
# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
# a lock path must be set. (string value)
#lock_path = <None>
[oslo_messaging_amqp]
#
# From oslo.messaging
#
# Name for the AMQP container. must be globally unique. Defaults to a generated
# UUID (string value)
#container_name = <None>
# Timeout for inactive connections (in seconds) (integer value)
#idle_timeout = 0
# Debug: dump AMQP frames to stdout (boolean value)
#trace = false
# Attempt to connect via SSL. If no other ssl-related parameters are given, it
# will use the system's CA-bundle to verify the server's certificate. (boolean
# value)
#ssl = false
# CA certificate PEM file used to verify the server's certificate (string
# value)
#ssl_ca_file =
# Self-identifying certificate PEM file for client authentication (string
# value)
#ssl_cert_file =
# Private key PEM file used to sign ssl_cert_file certificate (optional)
# (string value)
#ssl_key_file =
# Password for decrypting ssl_key_file (if encrypted) (string value)
#ssl_key_password = <None>
# By default SSL checks that the name in the server's certificate matches the
# hostname in the transport_url. In some configurations it may be preferable to
# use the virtual hostname instead, for example if the server uses the Server
# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
# virtual host name instead of the DNS name. (boolean value)
#ssl_verify_vhost = false
# Space separated list of acceptable SASL mechanisms (string value)
#sasl_mechanisms =
# Path to directory that contains the SASL configuration (string value)
#sasl_config_dir =
# Name of configuration file (without .conf suffix) (string value)
#sasl_config_name =
# SASL realm to use if no realm present in username (string value)
#sasl_default_realm =
# Seconds to pause before attempting to re-connect. (integer value)
# Minimum value: 1
#connection_retry_interval = 1
# Increase the connection_retry_interval by this many seconds after each
# unsuccessful failover attempt. (integer value)
# Minimum value: 0
#connection_retry_backoff = 2
# Maximum limit for connection_retry_interval + connection_retry_backoff
# (integer value)
# Minimum value: 1
#connection_retry_interval_max = 30
# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
# recoverable error. (integer value)
# Minimum value: 1
#link_retry_delay = 10
# The maximum number of attempts to re-send a reply message which failed due to
# a recoverable error. (integer value)
# Minimum value: -1
#default_reply_retry = 0
# The deadline for an rpc reply message delivery. (integer value)
# Minimum value: 5
#default_reply_timeout = 30
# The deadline for an rpc cast or call message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_send_timeout = 30
# The deadline for a sent notification message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_notify_timeout = 30
# The duration to schedule a purge of idle sender links. Detach link after
# expiry. (integer value)
# Minimum value: 1
#default_sender_link_timeout = 600
# Indicates the addressing mode used by the driver.
# Permitted values:
# 'legacy' - use legacy non-routable addressing
# 'routable' - use routable addresses
# 'dynamic' - use legacy addresses if the message bus does not support routing
# otherwise use routable addressing (string value)
#addressing_mode = dynamic
# Enable virtual host support for those message buses that do not natively
# support virtual hosting (such as qpidd). When set to true the virtual host
# name will be added to all message bus addresses, effectively creating a
# private 'subnet' per virtual host. Set to False if the message bus supports
# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
# as the name of the virtual host. (boolean value)
#pseudo_vhost = true
# address prefix used when sending to a specific server (string value)
#server_request_prefix = exclusive
# address prefix used when broadcasting to all servers (string value)
#broadcast_prefix = broadcast
# address prefix when sending to any server in group (string value)
#group_request_prefix = unicast
# Address prefix for all generated RPC addresses (string value)
#rpc_address_prefix = openstack.org/om/rpc
# Address prefix for all generated Notification addresses (string value)
#notify_address_prefix = openstack.org/om/notify
# Appended to the address prefix when sending a fanout message. Used by the
# message bus to identify fanout messages. (string value)
#multicast_address = multicast
# Appended to the address prefix when sending to a particular RPC/Notification
# server. Used by the message bus to identify messages sent to a single
# destination. (string value)
#unicast_address = unicast
# Appended to the address prefix when sending to a group of consumers. Used by
# the message bus to identify messages that should be delivered in a round-
# robin fashion across consumers. (string value)
#anycast_address = anycast
# Exchange name used in notification addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_notification_exchange if set
# else control_exchange if set
# else 'notify' (string value)
#default_notification_exchange = <None>
# Exchange name used in RPC addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_rpc_exchange if set
# else control_exchange if set
# else 'rpc' (string value)
#default_rpc_exchange = <None>
# Window size for incoming RPC Reply messages. (integer value)
# Minimum value: 1
#reply_link_credit = 200
# Window size for incoming RPC Request messages (integer value)
# Minimum value: 1
#rpc_server_credit = 100
# Window size for incoming Notification messages (integer value)
# Minimum value: 1
#notify_server_credit = 100
# Send messages of this type pre-settled.
# Pre-settled messages will not receive acknowledgement
# from the peer. Note well: pre-settled messages may be
# silently discarded if the delivery fails.
# Permitted values:
# 'rpc-call' - send RPC Calls pre-settled
# 'rpc-reply'- send RPC Replies pre-settled
# 'rpc-cast' - Send RPC Casts pre-settled
# 'notify' - Send Notifications pre-settled
# (multi valued)
#pre_settled = rpc-cast
#pre_settled = rpc-reply
[oslo_messaging_kafka]
#
# From oslo.messaging
#
# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576
# Default timeout(s) for Kafka consumers (floating point value)
#kafka_consumer_timeout = 1.0
# DEPRECATED: Pool Size for Kafka Consumers (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#pool_size = 10
# DEPRECATED: The pool size limit for connections expiration policy (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_min_size = 2
# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_ttl = 1200
# Group id for Kafka consumer. Consumers in one group will coordinate message
# consumption (string value)
#consumer_group = oslo_messaging_consumer
# Upper bound on the delay for KafkaProducer batching in seconds (floating
# point value)
#producer_batch_timeout = 0.0
# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384
# The compression codec for all data generated by the producer. If not set,
# compression will not be used. Note that the allowed values of this depend on
# the kafka version (string value)
# Possible values:
# none - <No description provided>
# gzip - <No description provided>
# snappy - <No description provided>
# lz4 - <No description provided>
# zstd - <No description provided>
#compression_codec = none
# Enable asynchronous consumer commits (boolean value)
#enable_auto_commit = false
# The maximum number of records returned in a poll call (integer value)
#max_poll_records = 500
# Protocol used to communicate with brokers (string value)
# Possible values:
# PLAINTEXT - <No description provided>
# SASL_PLAINTEXT - <No description provided>
# SSL - <No description provided>
# SASL_SSL - <No description provided>
#security_protocol = PLAINTEXT
# Mechanism when security protocol is SASL (string value)
#sasl_mechanism = PLAIN
# CA certificate PEM file used to verify the server certificate (string value)
#ssl_cafile =
# Client certificate PEM file used for authentication. (string value)
#ssl_client_cert_file =
# Client key PEM file used for authentication. (string value)
#ssl_client_key_file =
# Client key password file used for authentication. (string value)
#ssl_client_key_password =
[oslo_messaging_notifications]
#
# From oslo.messaging
#
# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =
# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>
# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications
# The maximum number of attempts to re-send a notification message which failed
# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
# (integer value)
#retry = -1
[oslo_messaging_rabbit]
#
# From oslo.messaging
#
# Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be
# durable and this value will be ignored. (boolean value)
#amqp_durable_queues = false
# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false
# Connect over SSL. (boolean value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
#ssl = false
# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
#ssl_version =
# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
#ssl_key_file =
# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
#ssl_cert_file =
# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
#ssl_ca_file =
# Global toggle for enforcing the OpenSSL FIPS mode. This feature requires
# Python support. This is available in Python 3.9 in all environments and may
# have been backported to older Python versions on select environments. If the
# Python executable used does not support OpenSSL FIPS mode, an exception will
# be raised. (boolean value)
#ssl_enforce_fips_mode = false
# Run the health check heartbeat thread through a native python thread by
# default. If this option is equal to False then the health check heartbeat
# will inherit the execution model from the parent process. For example if the
# parent process has monkey patched the stdlib by using eventlet/greenlet then
# the heartbeat will be run through a green thread. This option should be set
# to True only for the wsgi services. (boolean value)
#heartbeat_in_pthread = false
# How long to wait (in seconds) before reconnecting in response to an AMQP
# consumer cancel notification. (floating point value)
# Minimum value: 0.0
# Maximum value: 4.5
#kombu_reconnect_delay = 1.0
# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may not be available in future versions. (string value)
#kombu_compression = <None>
# How long to wait a missing client before abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60
# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Possible values:
# round-robin - <No description provided>
# shuffle - <No description provided>
#kombu_failover_strategy = round-robin
# The RabbitMQ login method. (string value)
# Possible values:
# PLAIN - <No description provided>
# AMQPLAIN - <No description provided>
# EXTERNAL - <No description provided>
# RABBIT-CR-DEMO - <No description provided>
#rabbit_login_method = AMQPLAIN
# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1
# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
#rabbit_retry_backoff = 2
# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30
# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
#rabbit_ha_queues = false
# Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a
# modern queue type for RabbitMQ implementing a durable, replicated FIFO queue
# based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0.
# If set this option will conflict with the HA queues (``rabbit_ha_queues``)
# aka mirrored queues, in other words the HA queues should be disabled, quorum
# queues durable by default so the amqp_durable_queues opion is ignored when
# this option enabled. (boolean value)
#rabbit_quorum_queue = false
# Each time a message is redelivered to a consumer, a counter is incremented.
# Once the redelivery count exceeds the delivery limit the message gets dropped
# or dead-lettered (if a DLX exchange has been configured) Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
# (integer value)
#rabbit_quorum_delivery_limit = 0
# By default all messages are maintained in memory if a quorum queue grows in
# length it can put memory pressure on a cluster. This option can limit the
# number of messages in the quorum queue. Used only when rabbit_quorum_queue is
# enabled, Default 0 which means dont set a limit. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_quroum_max_memory_length
#rabbit_quorum_max_memory_length = 0
# By default all messages are maintained in memory if a quorum queue grows in
# length it can put memory pressure on a cluster. This option can limit the
# number of memory bytes used by the quorum queue. Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
# (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_quroum_max_memory_bytes
#rabbit_quorum_max_memory_bytes = 0
# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. Setting 0 as
# value will disable the x-expires. If doing so, make sure you have a rabbitmq
# policy to delete the queues or you deployment will create an infinite number
# of queue over time. (integer value)
# Minimum value: 0
#rabbit_transient_queues_ttl = 1800
# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0
# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disables heartbeat). (integer value)
#heartbeat_timeout_threshold = 60
# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 3
# DEPRECATED: (DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for
# direct send. The direct send is used as reply, so the MessageUndeliverable
# exception is raised in case the client queue does not
# exist.MessageUndeliverable exception will be used to loop for a timeout to
# lets a chance to sender to recover.This flag is deprecated and it will not be
# possible to deactivate this functionality anymore (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Mandatory flag no longer deactivable.
#direct_mandatory_flag = true
# Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and
# notify consumerswhen queue is down (boolean value)
#enable_cancel_on_failover = false
[oslo_policy]
#
# From oslo.policy
#
# This option controls whether or not to enforce scope when evaluating
# policies. If ``True``, the scope of the token used in the request is compared
# to the ``scope_types`` of the policy being enforced. If the scopes do not
# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
# will be logged informing operators that policies are being invoked with
# mismatching scope. (boolean value)
#enforce_scope = false
# This option controls whether or not to use old deprecated defaults when
# evaluating policies. If ``True``, the old deprecated defaults are not going
# to be evaluated. This means if any existing token is allowed for old defaults
# but is disallowed for new defaults, it will be disallowed. It is encouraged
# to enable this flag along with the ``enforce_scope`` flag so that you can get
# the benefits of new defaults and ``scope_type`` together. If ``False``, the
# deprecated policy check string is logically OR'd with the new policy check
# string, allowing for a graceful upgrade experience between releases with new
# policies, which is the default behavior. (boolean value)
#enforce_new_defaults = false
# The relative or absolute path of a file that maps roles to permissions for a
# given service. Relative paths must be specified in relation to the
# configuration file setting this option. (string value)
#policy_file = policy.json
# Default rule. Enforced when a requested rule is not found. (string value)
#policy_default_rule = default
# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched. Missing or empty directories are ignored. (multi
# valued)
#policy_dirs = policy.d
# Content Type to send and receive data for REST based policy check (string
# value)
# Possible values:
# application/x-www-form-urlencoded - <No description provided>
# application/json - <No description provided>
#remote_content_type = application/x-www-form-urlencoded
# server identity verification for REST based policy check (boolean value)
#remote_ssl_verify_server_crt = false
# Absolute path to ca cert file for REST based policy check (string value)
#remote_ssl_ca_crt_file = <None>
# Absolute path to client cert for REST based policy check (string value)
#remote_ssl_client_crt_file = <None>
# Absolute path client key file REST based policy check (string value)
#remote_ssl_client_key_file = <None>
[profiler]
#
# OSprofiler library allows to trace requests going through various OpenStack
# services and create the accumulated report of what time was spent on each
# request processing step.
#
# From magnum.conf
#
#
# Enable the profiling for all services on this node.
#
# Default value is False (fully disable the profiling feature).
#
# Possible values:
#
# * True: Enables the feature
# * False: Disables the feature. The profiling cannot be started via this
# project
# operations. If the profiling is triggered by another project, this project
# part will be empty.
# (boolean value)
# Deprecated group/name - [profiler]/profiler_enabled
#enabled = false
#
# Enable SQL requests profiling in services.
#
# Default value is False (SQL requests won't be traced).
#
# Possible values:
#
# * True: Enables SQL requests profiling. Each SQL query will be part of the
# trace and can the be analyzed by how much time was spent for that.
# * False: Disables SQL requests profiling. The spent time is only shown on a
# higher level of operations. Single SQL queries cannot be analyzed this way.
# (boolean value)
#trace_sqlalchemy = false
#
# Secret key(s) to use for encrypting context data for performance profiling.
#
# This string value should have the following format:
# <key1>[,<key2>,...<keyn>],
# where each key is some random string. A user who triggers the profiling via
# the REST API has to set one of these keys in the headers of the REST API call
# to include profiling results of this node for this particular project.
#
# Both "enabled" flag and "hmac_keys" config options should be set to enable
# profiling. Also, to generate correct profiling information across all
# services
# at least one key needs to be consistent between OpenStack projects. This
# ensures it can be used from client side to generate the trace, containing
# information from all possible resources.
# (string value)
#hmac_keys = SECRET_KEY
#
# Connection string for a notifier backend.
#
# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
#
# Examples of possible values:
#
# * ``messaging://`` - use oslo_messaging driver for sending spans.
# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
# spans.
# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
# spans.
# (string value)
#connection_string = messaging://
#
# Document type for notification indexing in elasticsearch.
# (string value)
#es_doc_type = notification
#
# This parameter is a time value parameter (for example: es_scroll_time=2m),
# indicating for how long the nodes that participate in the search will
# maintain
# relevant resources in order to continue and support it.
# (string value)
#es_scroll_time = 2m
#
# Elasticsearch splits large requests in batches. This parameter defines
# maximum size of each batch (for example: es_scroll_size=10000).
# (integer value)
#es_scroll_size = 10000
#
# Redissentinel provides a timeout option on the connections.
# This parameter defines that timeout (for example: socket_timeout=0.1).
# (floating point value)
#socket_timeout = 0.1
#
# Redissentinel uses a service name to identify a master redis service.
# This parameter defines the name (for example:
# ``sentinal_service_name=mymaster``).
# (string value)
#sentinel_service_name = mymaster
#
# Enable filter traces that contain error/exception to a separated place.
#
# Default value is set to False.
#
# Possible values:
#
# * True: Enable filter traces that contain error/exception.
# * False: Disable the filter.
# (boolean value)
#filter_error_trace = false
[quotas]
#
# From magnum.conf
#
# Max number of clusters allowed per project. Admin can override this default
# quota for a project by setting explicit limit in quotas DB table (using
# /quotas REST API endpoint). (integer value)
#max_clusters_per_project = 20
[trust]
#
# From magnum.conf
#
# This setting controls whether to assign a trust to the cluster user or not.
# You will need to set it to True for clusters with volume_driver=cinder or
# registry_enabled=true in the underlying cluster template to work. This is a
# potential security risk since the trust gives instances OpenStack API access
# to the cluster's project. Note that this setting does not affect per-cluster
# trusts assigned to the Magnum service user. (boolean value)
#cluster_user_trust = false
# Id of the domain to create trustee for clusters (string value)
#trustee_domain_id = <None>
# Name of the domain to create trustee for s (string value)
#trustee_domain_name = <None>
# Id of the admin with roles sufficient to manage users in the trustee_domain
# (string value)
#trustee_domain_admin_id = <None>
# Name of the admin with roles sufficient to manage users in the trustee_domain
# (string value)
#trustee_domain_admin_name = <None>
# Id of the domain admin user's domain. trustee_domain_id is used by default
# (string value)
#trustee_domain_admin_domain_id = <None>
# Name of the domain admin user's domain. trustee_domain_name is used by
# default (string value)
#trustee_domain_admin_domain_name = <None>
# Password of trustee_domain_admin (string value)
#trustee_domain_admin_password = <None>
# The roles which are delegated to the trustee by the trustor (list value)
#roles =
# Auth interface used by instances/trustee (string value)
#trustee_keystone_interface = public
# Region in Identity service catalog to use for communication with the
# OpenStack service. (string value)
#trustee_keystone_region_name = <None>
[x509]
#
# From magnum.conf
#
# Certificate can get the CA flag in x509 extensions. (boolean value)
#allow_ca = false
# List of allowed x509 extensions. Available values: "authorityKeyIdentifier",
# "subjectKeyIdentifier", "authorityInfoAccess", "basicConstraints",
# "cRLDistributionPoints", "certificatePolicies", "extendedKeyUsage",
# "OCSPNoCheck", "inhibitAnyPolicy", "keyUsage", "nameConstraints",
# "subjectAltName", "issuerAltName" (list value)
#allowed_extensions = keyUsage,extendedKeyUsage,subjectAltName,basicConstraints,subjectKeyIdentifier
# List of allowed x509 key usage. Available values: "Digital Signature", "Non
# Repudiation", "Key Encipherment", "Data Encipherment", "Key Agreement",
# "Certificate Sign", "CRL Sign", "Encipher Only", "Decipher Only" (list value)
#allowed_key_usage = Digital Signature,Key Encipherment,Non Repudiation
# Number of days for which a certificate is valid. (integer value)
#term_of_validity = 1825
# Size of generated private key. (integer value)
#rsa_key_size = 2048
