Libnetwork Remote Network Driver Design

Libnetwork Remote Network Driver Design

What is Kuryr

Kuryr implements a libnetwork remote network driver and maps its calls to OpenStack Neutron. It works as a translator between libnetwork’s Container Network Model (CNM) and Neutron’s networking model. Kuryr also acts as a libnetwork IPAM driver.

Goal

Through Kuryr any Neutron plugin can be used as libnetwork backend with no additional effort. Neutron APIs are vendor agnostic and thus all Neutron plugins will have the capability of providing the networking backend of Docker for a similar small plugging snippet as they have in nova.

Kuryr also takes care of binding one of a veth pair to a network interface on the host, e.g., Linux bridge, Open vSwitch datapath and so on.

Kuryr Workflow - Host Networking

Kuryr resides in each host that runs Docker containers and serves APIs required for the libnetwork remote network driver. It is planned to use the Adding tags to resources new Neutron feature by Kuryr, to map between Neutron resource Id’s and Docker Id’s (UUID’s)

  1. libnetwork discovers Kuryr via plugin discovery mechanism before the first request is made
    • During this process libnetwork makes a HTTP POST call on /Plugin.Activate and examines the driver type, which defaults to "NetworkDriver" and "IpamDriver"
    • libnetwork also calls the following two API endpoints
      1. /NetworkDriver.GetCapabilities to obtain the capability of Kuryr which defaults to "local"
      2. /IpamDriver.GetDefaultAddressSpcaces to get the default address spaces used for the IPAM
  2. libnetwork registers Kuryr as a remote driver
  3. A user makes requests against libnetwork with the network driver specifier for Kuryr
    • i.e., --driver=kuryr or -d kuryr and --ipam-driver=kuryr for the Docker CLI
  4. libnetwork makes API calls against Kuryr
  5. Kuryr receives the requests and calls Neutron APIs with Neutron client
  6. Kuryr receives the responses from Neutron and compose the responses for libnetwork
  7. Kuryr returns the responses to libnetwork
  8. libnetwork stores the returned information to its key/value datastore backend
    • the key/value datastore is abstracted by libkv

Libnetwork User Workflow (with Kuryr as remote network driver) - Host Networking

  1. A user creates a network foo with the subnet information:

    $ sudo docker network create --driver=kuryr --ipam-driver=kuryr \
      --subnet 10.0.0.0/16 --gateway 10.0.0.1 --ip-range 10.0.0.0/24 foo
    286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364
    

    This makes a HTTP POST call on /IpamDriver.RequestPool with the following JSON data:

    {
        "AddressSpace": "global_scope",
        "Pool": "10.0.0.0/16",
        "SubPool": "10.0.0.0/24",
        "Options": {},
        "V6": false
    }
    

    The value of SubPool comes from the value specified in --ip-range option in the command above and value of AddressSpace will be global_scope or local_scope depending on value of capability_scope configuration option. Kuryr creates a subnetpool, and then returns the following response:

    {
        "PoolID": "941f790073c3a2c70099ea527ee3a6205e037e84749f2c6e8a5287d9c62fd376",
        "Pool": "10.0.0.0/24",
    }
    

    If the --gateway was specified like the command above, another HTTP POST call against /IpamDriver.RequestAddress follows with the JSON data below:

    {
        "Address": "10.0.0.1",
        "PoolID": "941f790073c3a2c70099ea527ee3a6205e037e84749f2c6e8a5287d9c62fd376",
        "Options": {"RequestAddressType": "com.docker.network.gateway"},
    }
    

    As the IPAM driver Kuryr allocates a requested IP address and returns the following response:

    {
        "Address": "10.0.0.1/24",
        "Data": {}
    }
    

    Finally a HTTP POST call on /NetworkDriver.CreateNetwork with the following JSON data:

    {
        "NetworkID": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
        "IPv4Data": [{
            "Pool": "10.0.0.0/24",
            "Gateway": "10.0.0.1/24",
            "AddressSpace": ""
        }],
        "IPv6Data": [],
        "Options": {"com.docker.network.enable_ipv6", false, "com.docker.network.generic": {}}
    }
    

    The Kuryr remote network driver will then generate a Neutron API request to create subnet with pool cidr and an underlying Neutron network. When the Neutron subnet and network has been created, the Kuryr remote network driver will generate an empty success response to the docker daemon. Kuryr tags the Neutron network with the NetworkID from docker.

  2. A user launches a container against network foo:

    $ sudo docker run --net=foo -itd --name=container1 busybox
    78c0458ba00f836f609113dd369b5769527f55bb62b5680d03aa1329eb416703
    

    This makes a HTTP POST call on /IpamDriver.RequestAddress with the following JSON data:

    {
        "Address": "",
        "PoolID": "941f790073c3a2c70099ea527ee3a6205e037e84749f2c6e8a5287d9c62fd376",
        "Options": {},
    }
    

    The IPAM driver Kuryr sends a port creation request to neutron and returns the following response with neutron provided ip address:

    {
        "Address": "10.0.0.2/24",
        "Data": {}
    }
    

    Then another HTTP POST call on /NetworkDriver.CreateEndpoint with the following JSON data is made:

    {
        "NetworkID": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
        "Interface": {
            "AddressIPv6": "",
            "MacAddress": "",
            "Address": "10.0.0.2/24"
        },
        "Options": {
            "com.docker.network.endpoint.exposedports": [],
            "com.docker.network.portmap": []
        },
        "EndpointID": "edb23d36d77336d780fe25cdb5cf0411e5edd91b0777982b4b28ad125e28a4dd"
    }
    

    The Kuryr remote network driver then generates a Neutron API request to fetch port with the matching fields for interface in the request. Kuryr then updates this port’s name, tagging it with endpoint ID.

    Following steps are taken:

    1. On the endpoint creation Kuryr examines if there’s a Port with CIDR that corresponds to Address or AddressIPv6 requested.
    2. If there’s a Port, Kuryr tries to reuse it without creating a new Port. Otherwise it creates a new one with the given address.
    3. Kuryr tags the Neutron port with EndpointID.

    When the Neutron port has been updated, the Kuryr remote driver will generate a response to the docker daemon in following form: (https://github.com/docker/libnetwork/blob/master/docs/remote.md#create-endpoint):

    {
        "Interface": {"MacAddress": "08:22:e0:a8:7d:db"}
    }
    

    On receiving success response, libnetwork makes a HTTP POST call on /NetworkDriver.Join with the following JSON data:

    {
        "NetworkID": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
        "SandboxKey": "/var/run/docker/netns/052b9aa6e9cd",
        "Options": null,
        "EndpointID": "edb23d36d77336d780fe25cdb5cf0411e5edd91b0777982b4b28ad125e28a4dd"
    }
    

    Kuryr connects the container to the corresponding neutron network by doing the following steps:

    1. Generate a veth pair.
    2. Connect one end of the veth pair to the container (which is running in a namespace that was created by Docker).
    3. Perform a neutron-port-type-dependent VIF-binding to the corresponding Neutron port using the VIF binding layer and depending on the specific port type.

    After the VIF-binding is completed, the Kuryr remote network driver generates a response to the Docker daemon as specified in the libnetwork documentation for a join request. (https://github.com/docker/libnetwork/blob/master/docs/remote.md#join)

  3. A user requests information about the network:

    $ sudo docker network inspect foo
     [
         {
             "Name": "foo",
             "Id": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
             "Scope": "local",
             "Driver": "kuryr",
             "EnableIPv6": false,
             "IPAM": {
                 "Driver": "kuryr",
                 "Options": {},
                 "Config": [{
                     "Subnet": "10.0.0.0/16",
                     "IPRange": "10.0.0.0/24",
                     "Gateway": "10.0.0.1"
                 }]
             },
             "Internal": false,
             "Containers": {
                 "78c0458ba00f836f609113dd369b5769527f55bb62b5680d03aa1329eb416703": {
                     "endpoint": "edb23d36d77336d780fe25cdb5cf0411e5edd91b0777982b4b28ad125e28a4dd",
                     "mac_address": "02:42:c0:a8:7b:cb",
                     "ipv4_address": "10.0.0.2/24",
                     "ipv6_address": ""
                 }
             },
             "Options": {},
             "Labels": {}
         }
     ]
    
  4. A user connects one more container to the network:

    $ sudo docker network connect foo container2
     d7fcc280916a8b771d2375688b700b036519d92ba2989622627e641bdde6e646
    
    $ sudo docker network inspect foo
     [
         {
             "Name": "foo",
             "Id": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
             "Scope": "local",
             "Driver": "kuryr",
             "EnableIPv6": false,
             "IPAM": {
                 "Driver": "kuryr",
                 "Options": {},
                 "Config": [{
                     "Subnet": "10.0.0.0/16",
                     "IPRange": "10.0.0.0/24",
                     "Gateway": "10.0.0.1"
                 }]
             },
             "Internal": false,
             "Containers": {
                 "78c0458ba00f836f609113dd369b5769527f55bb62b5680d03aa1329eb416703": {
                     "endpoint": "edb23d36d77336d780fe25cdb5cf0411e5edd91b0777982b4b28ad125e28a4dd",
                     "mac_address": "02:42:c0:a8:7b:cb",
                     "ipv4_address": "10.0.0.2/24",
                     "ipv6_address": ""
                 },
                 "d7fcc280916a8b771d2375688b700b036519d92ba2989622627e641bdde6e646": {
                     "endpoint": "a55976bafaad19f2d455c4516fd3450d3c52d9996a98beb4696dc435a63417fc",
                     "mac_address": "02:42:c0:a8:7b:cc",
                     "ipv4_address": "10.0.0.3/24",
                     "ipv6_address": ""
                 }
             },
             "Options": {},
             "Labels": {}
         }
     ]
    
  5. A user disconnects a container from the network:

    $ CID=d7fcc280916a8b771d2375688b700b036519d92ba2989622627e641bdde6e646
    $ sudo docker network disconnect foo $CID
    

    This makes a HTTP POST call on /NetworkDriver.Leave with the following JSON data:

    {
        "NetworkID": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
        "EndpointID": "a55976bafaad19f2d455c4516fd3450d3c52d9996a98beb4696dc435a63417fc"
    }
    

    Kuryr remote network driver will remove the VIF binding between the container and the Neutron port, and generate an empty response to the Docker daemon.

    Then libnetwork makes a HTTP POST call on /NetworkDriver.DeleteEndpoint with the following JSON data:

    {
        "NetworkID": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364",
        "EndpointID": "a55976bafaad19f2d455c4516fd3450d3c52d9996a98beb4696dc435a63417fc"
    }
    

    Kuryr remote network driver generates a Neutron API request to delete the associated Neutron port, in case the relevant port subnet is empty, Kuryr also deletes the subnet object using Neutron API and generate an empty response to the Docker daemon:

    {}
    

    Finally libnetwork makes a HTTP POST call on /IpamDriver.ReleaseAddress with the following JSON data:

    {
        "Address": "10.0.0.3",
        "PoolID": "941f790073c3a2c70099ea527ee3a6205e037e84749f2c6e8a5287d9c62fd376"
    }
    

    Kuryr remote IPAM driver generates a Neutron API request to delete the associated Neutron port. As the IPAM driver Kuryr deallocates the IP address and returns the following response:

    {}
    
  6. A user deletes the network:

    $ sudo docker network rm foo
    

    This makes a HTTP POST call against /NetworkDriver.DeleteNetwork with the following JSON data:

    {
        "NetworkID": "286eddb51ebca09339cb17aaec05e48ffe60659ced6f3fc41b020b0eb506d364"
    }
    

    Kuryr remote network driver generates a Neutron API request to delete the corresponding Neutron network and subnets. When the Neutron network and subnets has been deleted, the Kuryr remote network driver generate an empty response to the docker daemon: {}

    Then another HTTP POST call on /IpamDriver.ReleasePool with the following JSON data is made:

    {
        "PoolID": "941f790073c3a2c70099ea527ee3a6205e037e84749f2c6e8a5287d9c62fd376"
    }
    

    Kuryr delete the corresponding subnetpool and returns the following response:

    {}
    

Mapping between the CNM and the Neutron’s Networking Model

Kuryr communicates with Neutron via Neutron client and bridges between libnetwork and Neutron by translating their networking models. The following table depicts the current mapping between libnetwork and Neutron models:

libnetwork Neutron
Network Network
Sandbox Subnet, Port and netns
Endpoint Port

libnetwork’s Sandbox and Endpoint can be mapped into Neutron’s Subnet and Port, however, Sandbox is invisible from users directly and Endpoint is only the visible and editable resource entity attachable to containers from users’ perspective. Sandbox manages information exposed by Endpoint behind the scene automatically.

Notes on implementing the libnetwork remote driver API in Kuryr

  1. DiscoverNew Notification: Neutron does not use the information related to discovery of new resources such as new nodes and therefore the implementation of this API method does nothing.
  2. DiscoverDelete Notification: Neutron does not use the information related to discovery of resources such as nodes being deleted and therefore the implementation of this API method does nothing.
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.