Overcloud Administration

Updating Packages

It is possible to update packages on the overcloud hosts.

Package Repositories

If using custom DNF package repositories on CentOS, it may be necessary to update these prior to running a package update. To do this, update the configuration in ${KAYOBE_CONFIG_PATH}/dnf.yml and run the following command:

(kayobe) $ kayobe overcloud host configure --tags dnf --kolla-tags none

Package Update

To update one or more packages:

(kayobe) $ kayobe overcloud host package update --packages <package1>,<package2>

To update all eligible packages, use *, escaping if necessary:

(kayobe) $ kayobe overcloud host package update --packages "*"

To only install updates that have been marked security related:

(kayobe) $ kayobe overcloud host package update --packages "*" --security

Note that these commands do not affect packages installed in containers, only those installed on the host.

Kernel Updates

If the kernel has been updated, you will probably want to reboot the hosts to boot into the new kernel. This can be done using a command such as the following:

(kayobe) $ kayobe overcloud host command run --command "shutdown -r" --become

It is normally best to apply this to control plane hosts in batches to avoid clustered services from losing quorum. This can be achieved using the --limit argument, and ensuring services are fully up after rebooting before proceeding with the next batch.

Running Commands

It is possible to run a command on the overcloud hosts:

(kayobe) $ kayobe overcloud host command run --command "<command>"

For example:

(kayobe) $ kayobe overcloud host command run --command "service docker restart"

To execute the command with root privileges, add the --become argument. Adding the --verbose argument allows the output of the command to be seen.

Reconfiguring Containerised Services

When configuration is changed, it is necessary to apply these changes across the system in an automated manner. To reconfigure the overcloud, first make any changes required to the configuration on the Ansible control host. Next, run the following command:

(kayobe) $ kayobe overcloud service reconfigure

In case not all services’ configuration have been modified, performance can be improved by specifying Ansible tags to limit the tasks run in kayobe and/or kolla-ansible’s playbooks. This may require knowledge of the inner workings of these tools but in general, kolla-ansible tags the play used to configure each service by the name of that service. For example: nova, neutron or ironic. Use -t or --tags to specify kayobe tags and -kt or --kolla-tags to specify kolla-ansible tags. For example:

(kayobe) $ kayobe overcloud service reconfigure --tags config --kolla-tags nova,ironic

Deploying Updated Container Images

A common task is to deploy updated container images, without configuration changes. This might be to roll out an updated container OS or to pick up some package updates. This should be faster than a full deployment or reconfiguration.

To deploy updated container images:

(kayobe) $ kayobe overcloud service deploy containers

Note that if there are configuration changes, these will not be applied using this command so if in doubt, use a normal kayobe overcloud service deploy.

In case not all services’ containers have been modified, performance can be improved by specifying Ansible tags to limit the tasks run in kayobe and/or kolla-ansible’s playbooks. This may require knowledge of the inner workings of these tools but in general, kolla-ansible tags the play used to configure each service by the name of that service. For example: nova, neutron or ironic. Use -t or --tags to specify kayobe tags and -kt or --kolla-tags to specify kolla-ansible tags. For example:

(kayobe) $ kayobe overcloud service deploy containers --kolla-tags nova,ironic

Upgrading Containerised Services

Containerised control plane services may be upgraded by replacing existing containers with new containers using updated images which have been pulled from a registry or built locally. If using an updated version of Kayobe or upgrading from one release of OpenStack to another, be sure to follow the kayobe upgrade guide. It may be necessary to upgrade one or more services within a release, for example to apply a patch or minor release.

To upgrade the containerised control plane services:

(kayobe) $ kayobe overcloud service upgrade

As for the reconfiguration command, it is possible to specify tags for Kayobe and/or kolla-ansible:

(kayobe) $ kayobe overcloud service upgrade --tags config --kolla-tags keystone

Running Prechecks

Sometimes it may be useful to run prechecks without deploying services:

(kayobe) $ kayobe overcloud service prechecks

As for other similar commands, it is possible to specify tags for Kayobe and/or kolla-ansible:

(kayobe) $ kayobe overcloud service upgrade --tags config --kolla-tags keystone

Stopping the Overcloud Services

Note

This step will stop all containers on the overcloud hosts.

To stop the overcloud services:

(kayobe) $ kayobe overcloud service stop --yes-i-really-really-mean-it

It should be noted that this state is persistent - containers will remain stopped after a reboot of the host on which they are running.

It is possible to limit the operation to particular hosts via --kolla-limit, or to particular services via --kolla-tags. It is also possible to avoid stopping the common containers via --kolla-skip-tags common. For example:

(kayobe) $ kayobe overcloud service stop –kolla-tags glance,nova –kolla-skip-tags common

Destroying the Overcloud Services

Note

This step will destroy all containers, container images, volumes and data on the overcloud hosts.

To destroy the overcloud services:

(kayobe) $ kayobe overcloud service destroy --yes-i-really-really-mean-it

Deprovisioning The Cloud

Note

This step will power down the overcloud hosts and delete their nodes’ instance state from the seed’s ironic service.

To deprovision the overcloud:

(kayobe) $ kayobe overcloud deprovision

Saving Overcloud Service Configuration

It is often useful to be able to save the configuration of the control plane services for inspection or comparison with another configuration set prior to a reconfiguration or upgrade. This command will gather and save the control plane configuration for all hosts to the Ansible control host:

(kayobe) $ kayobe overcloud service configuration save

The default location for the saved configuration is $PWD/overcloud-config, but this can be changed via the output-dir argument. To gather configuration from a directory other than the default /etc/kolla, use the node-config-dir argument.

Generating Overcloud Service Configuration

Prior to deploying, reconfiguring, or upgrading a control plane, it may be useful to generate the configuration that will be applied, without actually applying it to the running containers. The configuration should typically be generated in a directory other than the default configuration directory of /etc/kolla, to avoid overwriting the active configuration:

(kayobe) $ kayobe overcloud service configuration generate --node-config-dir /path/to/generated/config

The configuration will be generated remotely on the overcloud hosts in the specified directory, with one subdirectory per container. This command may be followed by kayobe overcloud service configuration save to gather the generated configuration to the Ansible control host.

Performing Database Backups

Database backups can be performed using the underlying support in Kolla Ansible.

In order to enable backups, enable Mariabackup in ${KAYOBE_CONFIG_PATH}/kolla.yml:

kolla_enable_mariabackup: true

To apply this change, use the kayobe overcloud service reconfigure command.

To perform a full backup, run the following command:

kayobe overcloud database backup

Or to perform an incremental backup, run the following command:

kayobe overcloud database backup --incremental

Further information on backing up and restoring the database is available in the Kolla Ansible documentation.

Performing Database Recovery

Recover a completely stopped MariaDB cluster using the underlying support in Kolla Ansible.

To perform recovery run the following command:

kayobe overcloud database recover

Or to perform recovery on specified host, run the following command:

kayobe overcloud database recover --force-recovery-host <host>

By default the underlying kolla-ansible will automatically determine which host to use, and this option should not be used.

Gathering Facts

The following command may be used to gather facts for all overcloud hosts, for both Kayobe and Kolla Ansible:

kayobe overcloud facts gather

This may be useful to populate a fact cache in advance of other operations.