iDRAC driver

iDRAC driver

Overview

iDRAC hardware is supported by the idrac hardware type. It is also supported by the standard ipmi hardware type, though with a smaller feature set.

Enabling

The idrac hardware type requires the python-dracclient library to be installed, for example:

sudo pip install 'python-dracclient>=1.5.0,<3.0.0'

To enable the idrac hardware type, add the following to your /etc/ironic/ironic.conf:

[DEFAULT]
enabled_hardware_types=idrac
enabled_management_interfaces=idrac
enabled_power_interfaces=idrac

To enable all optional features (inspection, RAID and vendor passthru), use the following configuration:

[DEFAULT]
enabled_hardware_types=idrac
enabled_inspect_interfaces=idrac
enabled_management_interfaces=idrac
enabled_power_interfaces=idrac
enabled_raid_interfaces=idrac
enabled_vendor_interfaces=idrac

Enrolling

The following command will enroll a bare metal node with the idrac hardware type:

openstack baremetal node create --driver idrac \
    --driver-info drac_address=http://drac.host \
    --driver-info drac_username=user \
    --driver-info drac_password=pa$$w0rd

Known Issues

Nodes go into maintenance mode

After some period of time, nodes managed by the idrac hardware type may go into maintenance mode in Ironic. This issue can be worked around by changing the Ironic power state poll interval to 70 seconds. See [conductor]sync_power_state_interval in /etc/ironic/ironic.conf.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.