CIMC driver¶

Install the ImcSdk module¶

1. Install it:

   $ pip install "ImcSdk>=0.7.2"
   

Tested Platforms¶

This driver works with UCS C-Series servers and has been tested with:

• UCS C240M3S

Configuring and Enabling the driver¶

1. Add cisco-ucs-standalone to enabled_hardware_types in /etc/ironic/ironic.conf. For example:

   enabled_hardware_types = ipmi,cisco-ucs-standalone
   

2. Restart the Ironic conductor service:

   For Ubuntu/Debian systems:

   $ sudo service ironic-conductor restart
   

   or for RHEL/CentOS/Fedora:

   $ sudo systemctl restart openstack-ironic-conductor
   

Registering CIMC Managed UCS node in Ironic¶

Nodes configured for CIMC driver should have the driver property set to cisco-ucs-standalone. The following configuration values are also required in driver_info:

• cimc_address: IP address or hostname for CIMC
• cimc_username: CIMC login user name
• cimc_password: CIMC login password for the above CIMC user.
• deploy_kernel: Identifier for the deployment kernel e.g. a Glance UUID
• deploy_ramdisk: Identifier for the deployment ramdisk e.g. a Glance UUID

The following sequence of commands can be used to enroll a UCS Standalone node.

• Create Node:

  openstack baremetal node create --driver cisco-ucs-standalone \
    --driver-info cimc_address=<CIMC hostname OR ip-address> \
    --driver-info cimc_username=<cimc_username> \
    --driver-info cimc_password=<cimc_password> \
    --driver-info deploy_kernel=<glance_uuid_of_deploy_kernel> \
    --driver-info deploy_ramdisk=<glance_uuid_of_deploy_ramdisk> \
    --property cpus=<number_of_cpus> \
    --property memory_mb=<memory_size_in_MB> \
    --property local_gb=<local_disk_size_in_GB> \
    --property cpu_arch=<cpu_arch>
  

  The above command ‘openstack baremetal node create’ will return UUID of the node, which is the value of $NODE in the following command.

• Associate port with the node created:

  openstack baremetal port create --node $NODE <MAC_address_of_Ucs_server's_NIC>
  

For more information about enrolling nodes see Enrollment in the install guide.