iRMC driver

Overview

The iRMC driver enables control FUJITSU PRIMERGY via ServerView Common Command Interface (SCCI). Support for FUJITSU PRIMERGY servers consists of the irmc hardware type and a few hardware interfaces specific for that hardware type.

Prerequisites

Hardware Type

The irmc hardware type is available for FUJITSU PRIMERGY servers. For information on how to enable the irmc hardware type, see Enabling hardware types.

Hardware interfaces

The irmc hardware type overrides the selection of the following hardware interfaces:

  • bios

    Supports irmc and no-bios. The default is irmc.

  • boot

    Supports irmc-virtual-media, irmc-pxe, and pxe. The default is irmc-virtual-media. The irmc-virtual-media boot interface enables the virtual media based deploy with IPA (Ironic Python Agent).

    Warning

    We deprecated the pxe boot interface when used with irmc hardware type. Support for this interface will be removed in the future. Instead, use irmc-pxe. irmc-pxe boot interface was introduced in Pike.

  • console

    Supports ipmitool-socat, ipmitool-shellinabox, and no-console. The default is ipmitool-socat.

  • inspect

    Supports irmc, inspector, and no-inspect. The default is irmc.

    Note

    Ironic Inspector needs to be present and configured to use inspector as the inspect interface.

  • management

    Supports only irmc.

  • power

    Supports irmc, which enables power control via ServerView Common Command Interface (SCCI), by default. Also supports ipmitool.

  • raid

    Supports irmc, no-raid and agent. The default is no-raid.

For other hardware interfaces, irmc hardware type supports the Bare Metal reference interfaces. For more details about the hardware interfaces and how to enable the desired ones, see Enabling hardware interfaces.

Here is a complete configuration example with most of the supported hardware interfaces enabled for irmc hardware type.

[DEFAULT]
enabled_hardware_types = irmc
enabled_bios_interfaces = irmc
enabled_boot_interfaces = irmc-virtual-media,irmc-pxe
enabled_console_interfaces = ipmitool-socat,ipmitool-shellinabox,no-console
enabled_deploy_interfaces = iscsi,direct
enabled_inspect_interfaces = irmc,inspector,no-inspect
enabled_management_interfaces = irmc
enabled_network_interfaces = flat,neutron
enabled_power_interfaces = irmc
enabled_raid_interfaces = no-raid,irmc
enabled_storage_interfaces = noop,cinder
enabled_vendor_interfaces = no-vendor,ipmitool

Here is a command example to enroll a node with irmc hardware type.

baremetal node create \
   --bios-interface irmc \
   --boot-interface irmc-pxe \
   --deploy-interface direct \
   --inspect-interface irmc  \
   --raid-interface irmc

Node configuration

  • Each node is configured for irmc hardware type by setting the following ironic node object’s properties:

    • driver_info/irmc_address property to be IP address or hostname of the iRMC.

    • driver_info/irmc_username property to be username for the iRMC with administrator privileges.

    • driver_info/irmc_password property to be password for irmc_username.

    • properties/capabilities property to be boot_mode:uefi if UEFI boot is required.

    • properties/capabilities property to be secure_boot:true if UEFI Secure Boot is required. Please refer to UEFI Secure Boot Support for more information.

  • The following properties are also required if irmc-virtual-media boot interface is used:

    • driver_info/irmc_deploy_iso property to be either deploy iso file name, Glance UUID, or Image Service URL.

    • instance info/irmc_boot_iso property to be either boot iso file name, Glance UUID, or Image Service URL. This is optional property when boot_option is set to netboot.

  • All of the nodes are configured by setting the following configuration options in the [irmc] section of /etc/ironic/ironic.conf:

    • port: Port to be used for iRMC operations; either 80 or 443. The default value is 443. Optional.

    • auth_method: Authentication method for iRMC operations; either basic or digest. The default value is basic. Optional.

    • client_timeout: Timeout (in seconds) for iRMC operations. The default value is 60. Optional.

    • sensor_method: Sensor data retrieval method; either ipmitool or scci. The default value is ipmitool. Optional.

  • The following options are required if irmc-virtual-media boot interface is enabled:

    • remote_image_share_root: Ironic conductor node’s NFS or CIFS root path. The default value is /remote_image_share_root.

    • remote_image_server: IP of remote image server.

    • remote_image_share_type: Share type of virtual media, either NFS or CIFS. The default is CIFS.

    • remote_image_share_name: share name of remote_image_server. The default value is share.

    • remote_image_user_name: User name of remote_image_server.

    • remote_image_user_password: Password of remote_image_user_name.

    • remote_image_user_domain: Domain name of remote_image_user_name.

  • The following options are required if irmc inspect interface is enabled:

    • snmp_version: SNMP protocol version; either v1, v2c or v3. The default value is v2c. Optional.

    • snmp_port: SNMP port. The default value is 161. Optional.

    • snmp_community: SNMP community required for versions v1 and v2c. The default value is public. Optional.

    • snmp_security: SNMP security name required for version v3. Optional.

  • Each node can be further configured by setting the following ironic node object’s properties which override the parameter values in [irmc] section of /etc/ironic/ironic.conf:

    • driver_info/irmc_port property overrides port.

    • driver_info/irmc_auth_method property overrides auth_method.

    • driver_info/irmc_client_timeout property overrides client_timeout.

    • driver_info/irmc_sensor_method property overrides sensor_method.

    • driver_info/irmc_snmp_version property overrides snmp_version.

    • driver_info/irmc_snmp_port property overrides snmp_port.

    • driver_info/irmc_snmp_community property overrides snmp_community.

    • driver_info/irmc_snmp_security property overrides snmp_security.

Optional functionalities for the irmc hardware type

UEFI Secure Boot Support

The hardware type irmc supports secure boot deploy, see UEFI secure boot mode for details.

Warning

Secure boot feature is not supported with pxe boot interface.

Node Cleaning Support

The irmc hardware type supports node cleaning. For more information on node cleaning, see Node cleaning.

Supported Automated Cleaning Operations

The automated cleaning operations supported are:

  • restore_irmc_bios_config: Restores BIOS settings on a baremetal node from backup data. If this clean step is enabled, the BIOS settings of a baremetal node will be backed up automatically before the deployment. By default, this clean step is disabled with priority 0. Set its priority to a positive integer to enable it. The recommended value is 10.

    Warning

    pxe boot interface, when used with irmc hardware type, does not support this clean step. If uses irmc hardware type, it is required to select irmc-pxe or irmc-virtual-media as the boot interface in order to make this clean step work.

Configuration options for the automated cleaning steps are listed under [irmc] section in ironic.conf

clean_priority_restore_irmc_bios_config = 0

For more information on node automated cleaning, see Automated cleaning

Boot from Remote Volume

The irmc hardware type supports the generic iPXE-based remote volume booting when using the following boot interfaces:

  • irmc-pxe

  • pxe

In addition, the irmc hardware type supports remote volume booting without iPXE. This is available when using the irmc-virtual-media boot interface. This feature configures a node to boot from a remote volume by using the API of iRMC. It supports iSCSI and FibreChannel.

Configuration

In addition to the configuration for generic drivers to remote volume boot, the iRMC driver requires the following configuration:

  • It is necessary to set physical port IDs to network ports and volume connectors. All cards including those not used for volume boot should be registered.

    The format of a physical port ID is: <Card Type><Slot No>-<Port No> where:

    • <Card Type>: could be LAN, FC or CNA

    • <Slot No>: 0 indicates onboard slot. Use 1 to 9 for add-on slots.

    • <Port No>: A port number starting from 1.

    These IDs are specified in a node’s driver_info[irmc_pci_physical_ids]. This value is a dictionary. The key is the UUID of a resource (Port or Volume Connector) and its value is the physical port ID. For example:

    {
      "1ecd14ee-c191-4007-8413-16bb5d5a73a2":"LAN0-1",
      "87f6c778-e60e-4df2-bdad-2605d53e6fc0":"CNA1-1"
    }
    

    It can be set with the following command:

    baremetal node set $NODE_UUID \
    --driver-info irmc_pci_physical_ids={} \
    --driver-info irmc_pci_physical_ids/$PORT_UUID=LAN0-1 \
    --driver-info irmc_pci_physical_ids/$VOLUME_CONNECTOR_UUID=CNA1-1
    
  • For iSCSI boot, volume connectors with both types iqn and ip are required. The configuration with DHCP is not supported yet.

  • For iSCSI, the size of the storage network is needed. This value should be specified in a node’s driver_info[irmc_storage_network_size]. It must be a positive integer < 32. For example, if the storage network is 10.2.0.0/22, use the following command:

    baremetal node set $NODE_UUID --driver-info irmc_storage_network_size=22
    

Supported hardware

The driver supports the PCI controllers, Fibrechannel Cards, Converged Network Adapters supported by Fujitsu ServerView Virtual-IO Manager.

Hardware Inspection Support

The irmc hardware type provides the iRMC-specific hardware inspection with irmc inspect interface.

Note

SNMP requires being enabled in ServerView® iRMC S4 Web Server(Network SettingsSNMP section).

Configuration

The Hardware Inspection Support in the iRMC driver requires the following configuration:

  • It is necessary to set ironic configuration with gpu_ids and fpga_ids options in [irmc] section.

    gpu_ids and fpga_ids are lists of <vendorID>/<deviceID> where:

    • <vendorID>: 4 hexadecimal digits starts with ‘0x’.

    • <deviceID>: 4 hexadecimal digits starts with ‘0x’.

    Here are sample values for gpu_ids and fpga_ids:

    gpu_ids = 0x1000/0x0079,0x2100/0x0080
    fpga_ids = 0x1000/0x005b,0x1100/0x0180
    
  • The python-scciclient package requires pyghmi version >= 1.0.22 and pysnmp version >= 4.2.3. They are used by the conductor service on the conductor. The latest version of pyghmi can be downloaded from here and pysnmp can be downloaded from here.

Supported properties

The inspection process will discover the following essential properties (properties required for scheduling deployment):

  • memory_mb: memory size

  • cpus: number of cpus

  • cpu_arch: cpu architecture

  • local_gb: disk size

Inspection can also discover the following extra capabilities for iRMC driver:

  • irmc_firmware_version: iRMC firmware version

  • rom_firmware_version: ROM firmware version

  • trusted_boot: The flag whether TPM(Trusted Platform Module) is supported by the server. The possible values are ‘True’ or ‘False’.

  • server_model: server model

  • pci_gpu_devices: number of gpu devices connected to the bare metal.

Inspection can also set/unset node’s traits with the following cpu type for iRMC driver:

  • CUSTOM_CPU_FPGA: The bare metal contains fpga cpu type.

Note

  • The disk size is returned only when eLCM License for FUJITSU PRIMERGY servers is activated. If the license is not activated, then Hardware Inspection will fail to get this value.

  • Before inspecting, if the server is power-off, it will be turned on automatically. System will wait for a few second before start inspecting. After inspection, power status will be restored to the previous state.

The operator can specify these capabilities in compute service flavor, for example:

openstack flavor set baremetal-flavor-name --property capabilities:irmc_firmware_version="iRMC S4-8.64F"

openstack flavor set baremetal-flavor-name --property capabilities:server_model="TX2540M1F5"

openstack flavor set baremetal-flavor-name --property capabilities:pci_gpu_devices="1"

See Capabilities discovery for more details and examples.

The operator can add a trait in compute service flavor, for example:

baremetal node add trait $NODE_UUID CUSTOM_CPU_FPGA

A valid trait must be no longer than 255 characters. Standard traits are defined in the os_traits library. A custom trait must start with the prefix CUSTOM_ and use the following characters: A-Z, 0-9 and _.

RAID configuration Support

The irmc hardware type provides the iRMC RAID configuration with irmc raid interface.

Note

  • RAID implementation for irmc hardware type is based on eLCM license and SDCard. Otherwise, SP(Service Platform) in lifecycle management must be available.

  • RAID implementation only supported for RAIDAdapter 0 in Fujitsu Servers.

Configuration

The RAID configuration Support in the iRMC drivers requires the following configuration:

  • It is necessary to set ironic configuration into Node with JSON file option:

    $ baremetal node set <node-uuid-or-name> \
      --target-raid-config <JSON file containing target RAID configuration>
    

    Here is some sample values for JSON file:

    {
        "logical_disks": [
            {
                "size_gb": 1000,
                "raid_level": "1"
        ]
    }
    

    or:

    {
        "logical_disks": [
            {
                "size_gb": 1000,
                "raid_level": "1",
                "controller": "FTS RAID Ctrl SAS 6G 1GB (D3116C) (0)",
                "physical_disks": [
                    "0",
                    "1"
                ]
            }
        ]
    }
    

Note

RAID 1+0 and 5+0 in iRMC driver does not support property physical_disks in target_raid_config during create raid configuration yet. See following example:

{
  "logical_disks":
    [
      {
        "size_gb": "MAX",
        "raid_level": "1+0"
      }
    ]
}

See RAID Configuration for more details and examples.

Supported properties

The RAID configuration using iRMC driver supports following parameters in JSON file:

  • size_gb: is mandatory properties in Ironic.

  • raid_level: is mandatory properties in Ironic. Currently, iRMC Server supports following RAID levels: 0, 1, 5, 6, 1+0 and 5+0.

  • controller: is name of the controller as read by the RAID interface.

  • physical_disks: are specific values for each raid array in LogicalDrive which operator want to set them along with raid_level.

The RAID configuration is supported as a manual cleaning step.

Note

  • iRMC server will power-on after create/delete raid configuration is applied, FGI (Foreground Initialize) will process raid configuration in iRMC server, thus the operation will completed upon power-on and power-off when created RAID on iRMC server.

See RAID Configuration for more details and examples.

BIOS configuration Support

The irmc hardware type provides the iRMC BIOS configuration with irmc bios interface.

Warning

irmc bios interface does not support factory_reset.

Configuration

The BIOS configuration in the iRMC driver supports the following settings:

  • boot_option_filter: Specifies from which drives can be booted. This supports following options: UefiAndLegacy, LegacyOnly, UefiOnly.

  • check_controllers_health_status_enabled: The UEFI FW checks the controller health status. This supports following options: true, false.

  • cpu_active_processor_cores: The number of active processor cores 1…n. Option 0 indicates that all available processor cores are active.

  • cpu_adjacent_cache_line_prefetch_enabled: The processor loads the requested cache line and the adjacent cache line. This supports following options: true, false.

  • cpu_vt_enabled: Supports the virtualization of platform hardware and several software environments, based on Virtual Machine Extensions to support the use of several software environments using virtual computers. This supports following options: true, false.

  • flash_write_enabled: The system BIOS can be written. Flash BIOS update is possible. This supports following options: true, false.

  • hyper_threading_enabled: Hyper-threading technology allows a single physical processor core to appear as several logical processors. This supports following options: true, false.

  • keep_void_boot_options_enabled: Boot Options will not be removed from “Boot Option Priority” list. This supports following options: true, false.

  • launch_csm_enabled: Specifies whether the Compatibility Support Module (CSM) is executed. This supports following options: true, false.

  • os_energy_performance_override_enabled: Prevents the OS from overruling any energy efficiency policy setting of the setup. This supports following options: true, false.

  • pci_aspm_support: Active State Power Management (ASPM) is used to power-manage the PCI Express links, thus consuming less power. This supports following options: Disabled, Auto, L0Limited, L1only, L0Force.

  • pci_above_4g_decoding_enabled: Specifies if memory resources above the 4GB address boundary can be assigned to PCI devices. This supports following options: true, false.

  • power_on_source: Specifies whether the switch on sources for the system are managed by the BIOS or the ACPI operating system. This supports following options: BiosControlled, AcpiControlled.

  • single_root_io_virtualization_support_enabled: Single Root IO Virtualization Support is active. This supports following options: true, false.

The BIOS configuration is supported as a manual cleaning step. See BIOS Configuration for more details and examples.

Supported platforms

This driver supports FUJITSU PRIMERGY BX S4 or RX S8 servers and above.

  • PRIMERGY BX920 S4

  • PRIMERGY BX924 S4

  • PRIMERGY RX300 S8

When irmc power interface is used, Soft Reboot (Graceful Reset) and Soft Power Off (Graceful Power Off) are only available if ServerView agents are installed. See iRMC S4 Manual for more details.

RAID configuration feature supports FUJITSU PRIMERGY servers with RAID-Ctrl-SAS-6G-1GB(D3116C) controller and above. For detail supported controller with OOB-RAID configuration, please see the whitepaper for iRMC RAID configuration.