The ironic.drivers.modules.ipmitool Module

IPMI power manager driver.

Uses the ‘ipmitool’ command (http://ipmitool.sourceforge.net/) to remotely manage hardware. This includes setting the boot device, getting a serial-over-LAN console, and controlling the power state of the machine.

NOTE THAT CERTAIN DISTROS MAY INSTALL openipmi BY DEFAULT, INSTEAD OF ipmitool, WHICH PROVIDES DIFFERENT COMMAND-LINE OPTIONS AND IS NOT SUPPORTED BY THIS DRIVER.

class ironic.drivers.modules.ipmitool.IPMIConsole

Bases: ironic.drivers.base.ConsoleInterface

A base ConsoleInterface that uses ipmitool.

get_properties()

validate(*args, **kwargs)

Validate the Node console info.

Parameters:task – a task from TaskManager. Raises:InvalidParameterValue Raises:MissingParameterValue when a required parameter is missing

class ironic.drivers.modules.ipmitool.IPMIManagement

Bases: ironic.drivers.base.ManagementInterface

get_boot_device(*args, **kwargs)

Get the current boot device for the task’s node.

Returns the current boot device of the node.

Parameters:task – a task from TaskManager. Raises:InvalidParameterValue if required IPMI parameters are missing. Raises:IPMIFailure on an error from ipmitool. Raises:MissingParameterValue if a required parameter is missing. Returns:a dictionary containing:

boot_device:the boot device, one of ironic.common.boot_devices or None if it is unknown. persistent:Whether the boot device will persist to all future boots or not, None if it is unknown.

get_properties()

get_sensors_data(*args, **kwargs)

Get sensors data.

Parameters:task – a TaskManager instance. Raises:FailedToGetSensorData when getting the sensor data fails. Raises:FailedToParseSensorData when parsing sensor data fails. Raises:InvalidParameterValue if required ipmi parameters are missing Raises:MissingParameterValue if a required parameter is missing. Returns:returns a dict of sensor data group by sensor type.

get_supported_boot_devices(task)

Get a list of the supported boot devices.

Parameters:task – a task from TaskManager. Returns:A list with the supported boot devices defined in ironic.common.boot_devices.

inject_nmi(*args, **kwargs)

Inject NMI, Non Maskable Interrupt.

Inject NMI (Non Maskable Interrupt) for a node immediately.

Parameters:task – A TaskManager instance containing the node to act on. Raises:IPMIFailure on an error from ipmitool. Returns:None

set_boot_device(*args, **kwargs)

Set the boot device for the task’s node.

Set the boot device to use on next reboot of the node.

Parameters:

• task – a task from TaskManager.
• device – the boot device, one of ironic.common.boot_devices.
• persistent – Boolean value. True if the boot device will persist to all future boots, False if not. Default: False.

Raises:

InvalidParameterValue if an invalid boot device is specified

Raises:

MissingParameterValue if required ipmi parameters are missing.

Raises:

IPMIFailure on an error from ipmitool.

validate(*args, **kwargs)

Check that ‘driver_info’ contains IPMI credentials.

Validates whether the ‘driver_info’ property of the supplied task’s node contains the required credentials information.

Parameters:task – a task from TaskManager. Raises:InvalidParameterValue if required IPMI parameters are missing. Raises:MissingParameterValue if a required parameter is missing.

class ironic.drivers.modules.ipmitool.IPMIPower

Bases: ironic.drivers.base.PowerInterface

get_power_state(*args, **kwargs)

Get the current power state of the task’s node.

Parameters:task – a TaskManager instance containing the node to act on. Returns:one of ironic.common.states POWER_OFF, POWER_ON or ERROR. Raises:InvalidParameterValue if required ipmi parameters are missing. Raises:MissingParameterValue if a required parameter is missing. Raises:IPMIFailure on an error from ipmitool (from _power_status call).

get_properties()

get_supported_power_states(task)

Get a list of the supported power states.

Parameters:task – A TaskManager instance containing the node to act on. currently not used. Returns:A list with the supported power states defined in ironic.common.states.

reboot(*args, **kwargs)

Cycles the power to the task’s node.

Parameters:

• task – a TaskManager instance containing the node to act on.
• timeout – timeout (in seconds) positive integer (> 0) for any power state. The timeout is counted once during power off and once during power on for reboots. None indicates that the default timeout will be used.

Raises:

MissingParameterValue if required ipmi parameters are missing.

Raises:

InvalidParameterValue if an invalid power state was specified.

Raises:

PowerStateFailure if the final state of the node is not POWER_ON or the intermediate state of the node is not POWER_OFF.

set_power_state(*args, **kwargs)

Turn the power on, off, soft reboot, or soft power off.

Parameters:

• task – a TaskManager instance containing the node to act on.
• power_state – desired power state. one of ironic.common.states, POWER_ON, POWER_OFF, SOFT_POWER_OFF, or SOFT_REBOOT.
• timeout – timeout (in seconds) positive integer (> 0) for any power state. The timeout is counted once during power off and once during power on for reboots. None indicates that the default timeout will be used.

Raises:

InvalidParameterValue if an invalid power state was specified.

Raises:

MissingParameterValue if required ipmi parameters are missing

Raises:

PowerStateFailure if the power couldn’t be set to pstate.

validate(*args, **kwargs)

Validate driver_info for ipmitool driver.

Check that node[‘driver_info’] contains IPMI credentials.

Parameters:task – a TaskManager instance containing the node to act on. Raises:InvalidParameterValue if required ipmi parameters are missing. Raises:MissingParameterValue if a required parameter is missing.

class ironic.drivers.modules.ipmitool.IPMIShellinaboxConsole

Bases: ironic.drivers.modules.ipmitool.IPMIConsole

A ConsoleInterface that uses ipmitool and shellinabox.

get_console(*args, **kwargs)

Get the type and connection information about the console.

start_console(*args, **kwargs)

Start a remote console for the node.

Parameters:task – a task from TaskManager Raises:InvalidParameterValue if required ipmi parameters are missing Raises:PasswordFileFailedToCreate if unable to create a file containing the password Raises:ConsoleError if the directory for the PID file cannot be created Raises:ConsoleSubprocessFailed when invoking the subprocess failed

stop_console(*args, **kwargs)

Stop the remote console session for the node.

Parameters:task – a task from TaskManager Raises:ConsoleError if unable to stop the console

class ironic.drivers.modules.ipmitool.IPMISocatConsole

Bases: ironic.drivers.modules.ipmitool.IPMIConsole

A ConsoleInterface that uses ipmitool and socat.

get_console(*args, **kwargs)

Get the type and connection information about the console.

Parameters:task – a task from TaskManager

start_console(*args, **kwargs)

Start a remote console for the node.

Parameters:task – a task from TaskManager Raises:InvalidParameterValue if required ipmi parameters are missing Raises:PasswordFileFailedToCreate if unable to create a file containing the password Raises:ConsoleError if the directory for the PID file cannot be created Raises:ConsoleSubprocessFailed when invoking the subprocess failed

stop_console(*args, **kwargs)

Stop the remote console session for the node.

Parameters:task – a task from TaskManager Raises:ConsoleError if unable to stop the console

class ironic.drivers.modules.ipmitool.VendorPassthru

Bases: ironic.drivers.base.VendorInterface

bmc_reset(*args, **kwargs)

Reset BMC with IPMI command ‘bmc reset (warm|cold)’.

Parameters:

• task – a TaskManager instance.
• http_method – the HTTP method used on the request.
• warm – boolean parameter to decide on warm or cold reset.

Raises:

IPMIFailure on an error from ipmitool.

Raises:

MissingParameterValue if a required parameter is missing.

Raises:

InvalidParameterValue when an invalid value is specified

get_properties()

send_raw(*args, **kwargs)

Send raw bytes to the BMC. Bytes should be a string of bytes.

Parameters:

• task – a TaskManager instance.
• http_method – the HTTP method used on the request.
• raw_bytes – a string of raw bytes to send, e.g. ‘0x00 0x01’

Raises:

IPMIFailure on an error from ipmitool.

Raises:

MissingParameterValue if a required parameter is missing.

Raises:

InvalidParameterValue when an invalid value is specified.

validate(*args, **kwargs)

Validate vendor-specific actions.

If invalid, raises an exception; otherwise returns None.

Valid methods:

• send_raw
• bmc_reset

Parameters:

• task – a task from TaskManager.
• method – method to be validated
• kwargs – info for action.

Raises:

InvalidParameterValue when an invalid parameter value is specified.

Raises:

MissingParameterValue if a required parameter is missing.