ironic-inspector.conf

ironic-inspector.conf

DEFAULT

listen_address
Type:string
Default:0.0.0.0

IP to listen on.

listen_port
Type:port number
Default:5050
Minimum Value:0
Maximum Value:65535

Port to listen on.

host
Type:string
Default:localhost

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Name of this node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. However, the node name must be valid within an AMQP key, and if using ZeroMQ, a valid hostname, FQDN, or IP address.

auth_strategy
Type:string
Default:keystone
Valid Values:keystone, noauth

Authentication method used on the ironic-inspector API. Either “noauth” or “keystone” are currently valid options. “noauth” will disable all authentication.

timeout
Type:integer
Default:3600
Maximum Value:315576000

Timeout after which introspection is considered failed, set to 0 to disable.

clean_up_period
Type:integer
Default:60

Amount of time in seconds, after which repeat clean up of timed out nodes and old nodes status information.

use_ssl
Type:boolean
Default:false

SSL Enabled/Disabled

ssl_cert_path
Type:string
Default:''

Path to SSL certificate

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:This option will be superseded by [ssl]cert_file.
ssl_key_path
Type:string
Default:''

Path to SSL key

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:This option will be superseded by [ssl]key_file.
max_concurrency
Type:integer
Default:1000
Minimum Value:2

The green thread pool size.

introspection_delay
Type:integer
Default:5

Delay (in seconds) between two introspections.

ipmi_address_fields
Type:list
Default:ilo_address,drac_host,drac_address,cimc_address

Ironic driver_info fields that are equivalent to ipmi_address.

rootwrap_config
Type:string
Default:/etc/ironic-inspector/rootwrap.conf

Path to the rootwrap configuration file to use for running commands as root

api_max_limit
Type:integer
Default:1000
Minimum Value:1

Limit the number of elements an API list-call returns

can_manage_boot
Type:boolean
Default:true

Whether the current installation of ironic-inspector can manage PXE booting of nodes. If set to False, the API will reject introspection requests with manage_boot missing or set to True.

backdoor_port
Type:string
Default:<None>

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket
Type:string
Default:<None>

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option.

log_options
Type:boolean
Default:true

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

graceful_shutdown_timeout
Type:integer
Default:60

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

api_paste_config
Type:string
Default:api-paste.ini

File name for the paste.deploy config for api service

wsgi_log_format
Type:string
Default:%(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

tcp_keepidle
Type:integer
Default:600

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

wsgi_default_pool_size
Type:integer
Default:100

Size of the pool of greenthreads used by wsgi

max_header_line
Type:integer
Default:16384

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

wsgi_keep_alive
Type:boolean
Default:true

If False, closes the client socket connection explicitly.

client_socket_timeout
Type:integer
Default:900

Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.

rpc_conn_pool_size
Type:integer
Default:30

Size of RPC connection pool.

Deprecated Variations
Group Name
DEFAULT rpc_conn_pool_size
conn_pool_min_size
Type:integer
Default:2

The pool size limit for connections expiration policy

conn_pool_ttl
Type:integer
Default:1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size
Type:integer
Default:64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations
Group Name
DEFAULT rpc_thread_pool_size
rpc_response_timeout
Type:integer
Default:60

Seconds to wait for a response from a call.

transport_url
Type:string
Default:rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange
Type:string
Default:openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

debug
Type:boolean
Default:false
Mutable:This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append
Type:string
Default:<None>
Mutable:This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations
Group Name
DEFAULT log-config
DEFAULT log_config
log_date_format
Type:string
Default:%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file
Type:string
Default:<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations
Group Name
DEFAULT logfile
log_dir
Type:string
Default:<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations
Group Name
DEFAULT logdir
watch_log_file
Type:boolean
Default:false

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog
Type:boolean
Default:false

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal
Type:boolean
Default:false

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility
Type:string
Default:LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json
Type:boolean
Default:false

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr
Type:boolean
Default:false

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog
Type:boolean
Default:false

Log output to Windows Event Log.

log_rotate_interval
Type:integer
Default:1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto “interval”.

log_rotate_interval_type
Type:string
Default:days
Valid Values:Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count
Type:integer
Default:30

Maximum number of rotated log files.

max_logfile_size_mb
Type:integer
Default:200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type
Type:string
Default:none
Valid Values:interval, size, none

Log rotation type.

Possible values

interval
Rotate logs at predefined time intervals.
size
Rotate logs once they reach a predefined size.
none
Do not rotate log files.
logging_context_format_string
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix
Type:string
Default:%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format
Type:string
Default:%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels
Type:list
Default:sqlalchemy=WARNING,iso8601=WARNING,requests=WARNING,urllib3.connectionpool=WARNING,keystonemiddleware=WARNING,swiftclient=WARNING,keystoneauth=WARNING,ironicclient=WARNING

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors
Type:boolean
Default:false

Enables or disables publication of error events.

instance_format
Type:string
Default:"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format
Type:string
Default:"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval
Type:integer
Default:0

Interval, number of seconds, of log rate limiting.

rate_limit_burst
Type:integer
Default:0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level
Type:string
Default:CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations
Type:boolean
Default:false

Enables or disables fatal status of deprecations.

capabilities

boot_mode
Type:boolean
Default:false

Whether to store the boot mode (BIOS or UEFI).

cpu_flags
Type:dict
Default:aes:cpu_aes,pdpe1gb:cpu_hugepages_1g,pse:cpu_hugepages,smx:cpu_txt,svm:cpu_vt,vmx:cpu_vt

Mapping between a CPU flag and a capability to set if this flag is present.

cors

allowed_origin
Type:list
Default:<None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials
Type:boolean
Default:true

Indicate that the actual request can include user credentials

expose_headers
Type:list
Default:''

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age
Type:integer
Default:3600

Maximum cache age of CORS preflight requests.

allow_methods
Type:list
Default:GET,POST,PUT,HEAD,PATCH,DELETE,OPTIONS

Indicate which methods can be used during the actual request.

allow_headers
Type:list
Default:X-Auth-Token,X-OpenStack-Ironic-Inspector-API-Minimum-Version,X-OpenStack-Ironic-Inspector-API-Maximum-Version,X-OpenStack-Ironic-Inspector-API-Version

Indicate which header field names may be used during the actual request.

database

sqlite_synchronous
Type:boolean
Default:true

If True, SQLite uses synchronous mode.

Deprecated Variations
Group Name
DEFAULT sqlite_synchronous
backend
Type:string
Default:sqlalchemy

The back end to use for the database.

Deprecated Variations
Group Name
DEFAULT db_backend
connection
Type:string
Default:<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations
Group Name
DEFAULT sql_connection
DATABASE sql_connection
sql connection
slave_connection
Type:string
Default:<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode
Type:string
Default:TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb
Type:boolean
Default:false

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time
Type:integer
Default:3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

Deprecated Variations
Group Name
DATABASE idle_timeout
database idle_timeout
DEFAULT sql_idle_timeout
DATABASE sql_idle_timeout
sql idle_timeout
min_pool_size
Type:integer
Default:1

Minimum number of SQL connections to keep open in a pool.

Deprecated Variations
Group Name
DEFAULT sql_min_pool_size
DATABASE sql_min_pool_size

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:The option to set the minimum pool size is not supported by sqlalchemy.
max_pool_size
Type:integer
Default:5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

Deprecated Variations
Group Name
DEFAULT sql_max_pool_size
DATABASE sql_max_pool_size
max_retries
Type:integer
Default:10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations
Group Name
DEFAULT sql_max_retries
DATABASE sql_max_retries
retry_interval
Type:integer
Default:10

Interval between retries of opening a SQL connection.

Deprecated Variations
Group Name
DEFAULT sql_retry_interval
DATABASE reconnect_interval
max_overflow
Type:integer
Default:50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations
Group Name
DEFAULT sql_max_overflow
DATABASE sqlalchemy_max_overflow
connection_debug
Type:integer
Default:0
Minimum Value:0
Maximum Value:100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations
Group Name
DEFAULT sql_connection_debug
connection_trace
Type:boolean
Default:false

Add Python stack traces to SQL as comment strings.

Deprecated Variations
Group Name
DEFAULT sql_connection_trace
pool_timeout
Type:integer
Default:<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations
Group Name
DATABASE sqlalchemy_pool_timeout
use_db_reconnect
Type:boolean
Default:false

Enable the experimental use of database reconnect on connection lost.

db_retry_interval
Type:integer
Default:1

Seconds between retries of a database transaction.

db_inc_retry_interval
Type:boolean
Default:true

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval
Type:integer
Default:10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries
Type:integer
Default:20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters
Type:string
Default:''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

discovery

enroll_node_driver
Type:string
Default:fake-hardware

The name of the Ironic driver used by the enroll hook when creating a new node in Ironic.

dnsmasq_pxe_filter

dhcp_hostsdir
Type:string
Default:/var/lib/ironic-inspector/dhcp-hostsdir

The MAC address cache directory, exposed to dnsmasq.This directory is expected to be in exclusive control of the driver.

purge_dhcp_hostsdir
Type:boolean
Default:true

Purge the hostsdir upon driver initialization. Setting to false should only be performed when the deployment of inspector is such that there are multiple processes executing inside of the same host and namespace. In this case, the Operator is responsible for setting up a custom cleaning facility.

dnsmasq_start_command
Type:string
Default:''

A (shell) command line to start the dnsmasq service upon filter initialization. Default: don’t start.

dnsmasq_stop_command
Type:string
Default:''

A (shell) command line to stop the dnsmasq service upon inspector (error) exit. Default: don’t stop.

iptables

dnsmasq_interface
Type:string
Default:br-ctlplane

Interface on which dnsmasq listens, the default is for VM’s.

firewall_chain
Type:string
Default:ironic-inspector

iptables chain name to use.

ethoib_interfaces
Type:list
Default:''

List of Etherent Over InfiniBand interfaces on the Inspector host which are used for physical access to the DHCP network. Multiple interfaces would be attached to a bond or bridge specified in dnsmasq_interface. The MACs of the InfiniBand nodes which are not in desired state are going to be blacklisted based on the list of neighbor MACs on these interfaces.

ip_version
Type:string
Default:4
Valid Values:4, 6

The IP version that will be used for iptables filter. Defaults to 4.

Possible values

4
IPv4
6
IPv6

ironic

auth_url
Type:unknown type
Default:<None>

Authentication URL

auth_strategy
Type:string
Default:keystone
Valid Values:keystone, noauth

Method to use for authentication: noauth or keystone.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [ironic]/auth_type, for noauth case set [ironic]/auth_type to none and specify ironic API URL via [ironic]/endpoint_override option.
auth_type
Type:unknown type
Default:<None>

Authentication type to load

Deprecated Variations
Group Name
ironic auth_plugin
cafile
Type:string
Default:<None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile
Type:string
Default:<None>

PEM encoded client certificate cert file

collect_timing
Type:boolean
Default:false

Collect per-API call timing information.

default_domain_id
Type:unknown type
Default:<None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name
Type:unknown type
Default:<None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

domain_id
Type:unknown type
Default:<None>

Domain ID to scope to

domain_name
Type:unknown type
Default:<None>

Domain name to scope to

endpoint_override
Type:string
Default:<None>

Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.

insecure
Type:boolean
Default:false

Verify HTTPS connections.

ironic_url
Type:string
Default:http://localhost:6385/

Ironic API URL, used to set Ironic API URL when auth_strategy option is noauth or auth_type is “none” to work with standalone Ironic without keystone.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [ironic]/endpoint_override option to set a specific ironic API url.
keyfile
Type:string
Default:<None>

PEM encoded client certificate key file

max_version
Type:string
Default:<None>

The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.

max_retries
Type:integer
Default:30

Maximum number of retries in case of conflict error (HTTP 409).

min_version
Type:string
Default:<None>

The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.

os_endpoint_type
Type:string
Default:internalURL

Ironic endpoint type.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [ironic]/valid_interfaces option to specify endpoint interfaces.
os_region
Type:string
Default:<None>

Keystone region used to get Ironic endpoints.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [ironic]/region_name option instead to configure region.
os_service_type
Type:string
Default:baremetal

Ironic service type.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [ironic]/service_type option to set a specific type.
password
Type:unknown type
Default:<None>

User’s password

project_domain_id
Type:unknown type
Default:<None>

Domain ID containing project

project_domain_name
Type:unknown type
Default:<None>

Domain name containing project

project_id
Type:unknown type
Default:<None>

Project ID to scope to

Deprecated Variations
Group Name
ironic tenant-id
ironic tenant_id
project_name
Type:unknown type
Default:<None>

Project name to scope to

Deprecated Variations
Group Name
ironic tenant-name
ironic tenant_name
region_name
Type:string
Default:<None>

The default region_name for endpoint URL discovery.

retry_interval
Type:integer
Default:2

Interval between retries in case of conflict error (HTTP 409).

service_name
Type:string
Default:<None>

The default service_name for endpoint URL discovery.

service_type
Type:string
Default:baremetal

The default service_type for endpoint URL discovery.

split_loggers
Type:boolean
Default:false

Log requests to multiple loggers.

system_scope
Type:unknown type
Default:<None>

Scope for system operations

tenant_id
Type:unknown type
Default:<None>

Tenant ID

tenant_name
Type:unknown type
Default:<None>

Tenant Name

timeout
Type:integer
Default:<None>

Timeout value for http requests

trust_id
Type:unknown type
Default:<None>

Trust ID

user_domain_id
Type:unknown type
Default:<None>

User’s domain id

user_domain_name
Type:unknown type
Default:<None>

User’s domain name

user_id
Type:unknown type
Default:<None>

User id

username
Type:unknown type
Default:<None>

Username

Deprecated Variations
Group Name
ironic user-name
ironic user_name
valid_interfaces
Type:list
Default:internal,public

List of interfaces, in order of preference, for endpoint URL.

version
Type:string
Default:<None>

Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version

keystone_authtoken

www_authenticate_uri
Type:string
Default:<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations
Group Name
keystone_authtoken auth_uri
auth_uri
Type:string
Default:<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason:The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
auth_version
Type:string
Default:<None>

API version of the admin Identity API endpoint.

delay_auth_decision
Type:boolean
Default:false

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout
Type:integer
Default:<None>

Request timeout value for communicating with Identity API server.

http_request_max_retries
Type:integer
Default:3

How many times are we trying to reconnect when communicating with Identity API Server.

cache
Type:string
Default:<None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile
Type:string
Default:<None>

Required if identity server requires client certificate

keyfile
Type:string
Default:<None>

Required if identity server requires client certificate

cafile
Type:string
Default:<None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure
Type:boolean
Default:false

Verify HTTPS connections.

region_name
Type:string
Default:<None>

The region in which the identity server can be found.

signing_dir
Type:string
Default:<None>

Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
memcached_servers
Type:list
Default:<None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations
Group Name
keystone_authtoken memcache_servers
token_cache_time
Type:integer
Default:300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

memcache_security_strategy
Type:string
Default:None
Valid Values:None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key
Type:string
Default:<None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry
Type:integer
Default:300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize
Type:integer
Default:10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout
Type:integer
Default:3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout
Type:integer
Default:60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout
Type:integer
Default:10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool
Type:boolean
Default:false

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

include_service_catalog
Type:boolean
Default:true

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind
Type:string
Default:permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

hash_algorithms
Type:list
Default:md5

Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
service_token_roles
Type:list
Default:service

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required
Type:boolean
Default:false

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

auth_type
Type:unknown type
Default:<None>

Authentication type to load

Deprecated Variations
Group Name
keystone_authtoken auth_plugin
auth_section
Type:unknown type
Default:<None>

Config Section from which to load plugin specific options

oslo_messaging_amqp

container_name
Type:string
Default:<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations
Group Name
amqp1 container_name
idle_timeout
Type:integer
Default:0

Timeout for inactive connections (in seconds)

Deprecated Variations
Group Name
amqp1 idle_timeout
trace
Type:boolean
Default:false

Debug: dump AMQP frames to stdout

Deprecated Variations
Group Name
amqp1 trace
ssl
Type:boolean
Default:false

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file
Type:string
Default:''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations
Group Name
amqp1 ssl_ca_file
ssl_cert_file
Type:string
Default:''

Self-identifying certificate PEM file for client authentication

Deprecated Variations
Group Name
amqp1 ssl_cert_file
ssl_key_file
Type:string
Default:''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations
Group Name
amqp1 ssl_key_file
ssl_key_password
Type:string
Default:<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations
Group Name
amqp1 ssl_key_password
ssl_verify_vhost
Type:boolean
Default:false

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms
Type:string
Default:''

Space separated list of acceptable SASL mechanisms

Deprecated Variations
Group Name
amqp1 sasl_mechanisms
sasl_config_dir
Type:string
Default:''

Path to directory that contains the SASL configuration

Deprecated Variations
Group Name
amqp1 sasl_config_dir
sasl_config_name
Type:string
Default:''

Name of configuration file (without .conf suffix)

Deprecated Variations
Group Name
amqp1 sasl_config_name
sasl_default_realm
Type:string
Default:''

SASL realm to use if no realm present in username

connection_retry_interval
Type:integer
Default:1
Minimum Value:1

Seconds to pause before attempting to re-connect.

connection_retry_backoff
Type:integer
Default:2
Minimum Value:0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max
Type:integer
Default:30
Minimum Value:1

Maximum limit for connection_retry_interval + connection_retry_backoff

Type:integer
Default:10
Minimum Value:1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry
Type:integer
Default:0
Minimum Value:-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for an rpc reply message delivery.

default_send_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

Type:integer
Default:600
Minimum Value:1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode
Type:string
Default:dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost
Type:boolean
Default:true

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix
Type:string
Default:exclusive

address prefix used when sending to a specific server

Deprecated Variations
Group Name
amqp1 server_request_prefix
broadcast_prefix
Type:string
Default:broadcast

address prefix used when broadcasting to all servers

Deprecated Variations
Group Name
amqp1 broadcast_prefix
group_request_prefix
Type:string
Default:unicast

address prefix when sending to any server in group

Deprecated Variations
Group Name
amqp1 group_request_prefix
rpc_address_prefix
Type:string
Default:openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix
Type:string
Default:openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address
Type:string
Default:multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address
Type:string
Default:unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address
Type:string
Default:anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange
Type:string
Default:<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange
Type:string
Default:<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

Type:integer
Default:200
Minimum Value:1

Window size for incoming RPC Reply messages.

rpc_server_credit
Type:integer
Default:100
Minimum Value:1

Window size for incoming RPC Request messages

notify_server_credit
Type:integer
Default:100
Minimum Value:1

Window size for incoming Notification messages

pre_settled
Type:multi-valued
Default:rpc-cast
Default:rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka

kafka_max_fetch_bytes
Type:integer
Default:1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout
Type:floating point
Default:1.0

Default timeout(s) for Kafka consumers

pool_size
Type:integer
Default:10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Driver no longer uses connection pool.
conn_pool_min_size
Type:integer
Default:2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Driver no longer uses connection pool.
conn_pool_ttl
Type:integer
Default:1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Driver no longer uses connection pool.
consumer_group
Type:string
Default:oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout
Type:floating point
Default:0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size
Type:integer
Default:16384

Size of batch for the producer async send

enable_auto_commit
Type:boolean
Default:false

Enable asynchronous consumer commits

max_poll_records
Type:integer
Default:500

The maximum number of records returned in a poll call

security_protocol
Type:string
Default:PLAINTEXT
Valid Values:PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism
Type:string
Default:PLAIN

Mechanism when security protocol is SASL

ssl_cafile
Type:string
Default:''

CA certificate PEM file used to verify the server certificate

oslo_messaging_notifications

driver
Type:multi-valued
Default:''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations
Group Name
DEFAULT notification_driver
transport_url
Type:string
Default:<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations
Group Name
DEFAULT notification_transport_url
topics
Type:list
Default:notifications

AMQP topic used for OpenStack notifications.

Deprecated Variations
Group Name
rpc_notifier2 topics
DEFAULT notification_topics
retry
Type:integer
Default:-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit

amqp_durable_queues
Type:boolean
Default:false

Use durable queues in AMQP.

amqp_auto_delete
Type:boolean
Default:false

Auto-delete queues in AMQP.

Deprecated Variations
Group Name
DEFAULT amqp_auto_delete
ssl
Type:boolean
Default:false

Connect over SSL.

Deprecated Variations
Group Name
oslo_messaging_rabbit rabbit_use_ssl
ssl_version
Type:string
Default:''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_version
ssl_key_file
Type:string
Default:''

SSL key file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_keyfile
ssl_cert_file
Type:string
Default:''

SSL cert file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_certfile
ssl_ca_file
Type:string
Default:''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_ca_certs
kombu_reconnect_delay
Type:floating point
Default:1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations
Group Name
DEFAULT kombu_reconnect_delay
kombu_compression
Type:string
Default:<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout
Type:integer
Default:60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_reconnect_timeout
kombu_failover_strategy
Type:string
Default:round-robin
Valid Values:round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method
Type:string
Default:AMQPLAIN
Valid Values:PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations
Group Name
DEFAULT rabbit_login_method
rabbit_retry_interval
Type:integer
Default:1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff
Type:integer
Default:2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations
Group Name
DEFAULT rabbit_retry_backoff
rabbit_interval_max
Type:integer
Default:30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues
Type:boolean
Default:false

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations
Group Name
DEFAULT rabbit_ha_queues
rabbit_transient_queues_ttl
Type:integer
Default:1800
Minimum Value:1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count
Type:integer
Default:0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold
Type:integer
Default:60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

heartbeat_rate
Type:integer
Default:2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

oslo_policy

enforce_scope
Type:boolean
Default:false

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

policy_file
Type:string
Default:policy.json

The file that defines policies.

Deprecated Variations
Group Name
DEFAULT policy_file
policy_default_rule
Type:string
Default:default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations
Group Name
DEFAULT policy_default_rule
policy_dirs
Type:multi-valued
Default:policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations
Group Name
DEFAULT policy_dirs
remote_content_type
Type:string
Default:application/x-www-form-urlencoded
Valid Values:application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt
Type:boolean
Default:false

server identity verification for REST based policy check

remote_ssl_ca_crt_file
Type:string
Default:<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file
Type:string
Default:<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file
Type:string
Default:<None>

Absolute path client key file REST based policy check

pci_devices

alias
Type:multi-valued
Default:''

An alias for PCI device identified by ‘vendor_id’ and ‘product_id’ fields. Format: {“vendor_id”: “1234”, “product_id”: “5678”, “name”: “pci_dev1”}

processing

add_ports
Type:string
Default:pxe
Valid Values:all, active, pxe, disabled

Which MAC addresses to add as ports during introspection. Possible values: all (all MAC addresses), active (MAC addresses of NIC with IP addresses), pxe (only MAC address of NIC node PXE booted from, falls back to “active” if PXE MAC is not supplied by the ramdisk).

keep_ports
Type:string
Default:all
Valid Values:all, present, added

Which ports (already present on a node) to keep after introspection. Possible values: all (do not delete anything), present (keep ports which MACs were present in introspection data), added (keep only MACs that we added during introspection).

overwrite_existing
Type:boolean
Default:true

Whether to overwrite existing values in node database. Disable this option to make introspection a non-destructive operation.

default_processing_hooks
Type:string
Default:ramdisk_error,root_disk_selection,scheduler,validate_interfaces,capabilities,pci_devices

Comma-separated list of default hooks for processing pipeline. Hook ‘scheduler’ updates the node with the minimum properties required by the Nova scheduler. Hook ‘validate_interfaces’ ensures that valid NIC data was provided by the ramdisk. Do not exclude these two unless you really know what you’re doing.

processing_hooks
Type:string
Default:$default_processing_hooks

Comma-separated list of enabled hooks for processing pipeline. The default for this is $default_processing_hooks, hooks can be added before or after the defaults like this: “prehook,$default_processing_hooks,posthook”.

ramdisk_logs_dir
Type:string
Default:<None>

If set, logs from ramdisk will be stored in this directory.

always_store_ramdisk_logs
Type:boolean
Default:false

Whether to store ramdisk logs even if it did not return an error message (dependent upon “ramdisk_logs_dir” option being set).

node_not_found_hook
Type:string
Default:<None>

The name of the hook to run when inspector receives inspection information from a node it isn’t already aware of. This hook is ignored by default.

store_data
Type:string
Default:none

The storage backend for storing introspection data. Possible values are: ‘none’, ‘database’ and ‘swift’. If set to ‘none’, introspection data will not be stored.

store_data_location
Type:string
Default:<None>

Name of the key to store the location of stored data in the extra column of the Ironic database.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:The introspection data could be retrieved from inspector API, there is no need to keep an extra link in ironic.
disk_partitioning_spacing
Type:boolean
Default:true

Whether to leave 1 GiB of disk size untouched for partitioning. Only has effect when used with the IPA as a ramdisk, for older ramdisk local_gb is calculated on the ramdisk side.

ramdisk_logs_filename_format
Type:string
Default:{uuid}_{dt:%Y%m%d-%H%M%S.%f}.tar.gz

File name template for storing ramdisk logs. The following replacements can be used: {uuid} - node UUID or “unknown”, {bmc} - node BMC address or “unknown”, {dt} - current UTC date and time, {mac} - PXE booting MAC or “unknown”.

power_off
Type:boolean
Default:true

Whether to power off a node after introspection.

pxe_filter

driver
Type:string
Default:iptables

PXE boot filter driver to use, possible filters are: “iptables”, “dnsmasq” and “noop”. Set “noop ” to disable the firewall filtering.

sync_period
Type:integer
Default:15
Minimum Value:0

Amount of time in seconds, after which repeat periodic update of the filter.

ssl

ca_file
Type:string
Default:<None>

CA certificate file to use to verify connecting clients.

Deprecated Variations
Group Name
DEFAULT ssl_ca_file
cert_file
Type:string
Default:<None>

Certificate file to use when starting the server securely.

Deprecated Variations
Group Name
DEFAULT ssl_cert_file
key_file
Type:string
Default:<None>

Private key file to use when starting the server securely.

Deprecated Variations
Group Name
DEFAULT ssl_key_file
version
Type:string
Default:<None>

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

ciphers
Type:string
Default:<None>

Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format.

swift

auth_url
Type:unknown type
Default:<None>

Authentication URL

auth_type
Type:unknown type
Default:<None>

Authentication type to load

Deprecated Variations
Group Name
swift auth_plugin
cafile
Type:string
Default:<None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile
Type:string
Default:<None>

PEM encoded client certificate cert file

collect_timing
Type:boolean
Default:false

Collect per-API call timing information.

container
Type:string
Default:ironic-inspector

Default Swift container to use when creating objects.

default_domain_id
Type:unknown type
Default:<None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name
Type:unknown type
Default:<None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

delete_after
Type:integer
Default:0

Number of seconds that the Swift object will last before being deleted. (set to 0 to never delete the object).

domain_id
Type:unknown type
Default:<None>

Domain ID to scope to

domain_name
Type:unknown type
Default:<None>

Domain name to scope to

endpoint_override
Type:string
Default:<None>

Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.

insecure
Type:boolean
Default:false

Verify HTTPS connections.

keyfile
Type:string
Default:<None>

PEM encoded client certificate key file

max_version
Type:string
Default:<None>

The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.

max_retries
Type:integer
Default:2

Maximum number of times to retry a Swift request, before failing.

min_version
Type:string
Default:<None>

The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.

os_endpoint_type
Type:string
Default:internalURL

Swift endpoint type.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [swift]/valid_interfaces option to specify endpoint interfaces.
os_region
Type:string
Default:<None>

Keystone region to get endpoint for.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [swift]/region_name option to configure region.
os_service_type
Type:string
Default:object-store

Swift service type.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Use [swift]/service_type option to set specific service type
password
Type:unknown type
Default:<None>

User’s password

project_domain_id
Type:unknown type
Default:<None>

Domain ID containing project

project_domain_name
Type:unknown type
Default:<None>

Domain name containing project

project_id
Type:unknown type
Default:<None>

Project ID to scope to

Deprecated Variations
Group Name
swift tenant-id
swift tenant_id
project_name
Type:unknown type
Default:<None>

Project name to scope to

Deprecated Variations
Group Name
swift tenant-name
swift tenant_name
region_name
Type:string
Default:<None>

The default region_name for endpoint URL discovery.

service_name
Type:string
Default:<None>

The default service_name for endpoint URL discovery.

service_type
Type:string
Default:object-store

The default service_type for endpoint URL discovery.

split_loggers
Type:boolean
Default:false

Log requests to multiple loggers.

system_scope
Type:unknown type
Default:<None>

Scope for system operations

tenant_id
Type:unknown type
Default:<None>

Tenant ID

tenant_name
Type:unknown type
Default:<None>

Tenant Name

timeout
Type:integer
Default:<None>

Timeout value for http requests

trust_id
Type:unknown type
Default:<None>

Trust ID

user_domain_id
Type:unknown type
Default:<None>

User’s domain id

user_domain_name
Type:unknown type
Default:<None>

User’s domain name

user_id
Type:unknown type
Default:<None>

User id

username
Type:unknown type
Default:<None>

Username

Deprecated Variations
Group Name
swift user-name
swift user_name
valid_interfaces
Type:list
Default:internal,public

List of interfaces, in order of preference, for endpoint URL.

version
Type:string
Default:<None>

Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.