The cinder.volume.drivers.dell_emc.vmax.fast Module

class VMAXFast(prtcl)

Bases: object

FAST Class for SMI-S based EMC volume drivers.

This FAST class is for EMC volume drivers based on SMI-S. It supports VMAX arrays.

add_storage_group_and_verify_tier_policy_assoc(conn, controllerConfigService, storageGroupInstanceName, storageGroupName, fastPolicyName, extraSpecs)

Adds a storage group to a tier policy and verifies success.

Add a storage group to a tier policy rule and verify that it was successful by getting the association.

Parameters:
  • conn – the connection to the ecom server
  • controllerConfigService – the controller config service
  • storageGroupInstanceName – the storage group instance name
  • storageGroupName – the storage group name (String)
  • fastPolicyName – the fast policy name (String)
  • extraSpecs – additional info
Returns:

assocTierPolicyInstanceName

add_storage_group_to_tier_policy_rule(conn, tierPolicyServiceInstanceName, storageGroupInstanceName, tierPolicyRuleInstanceName, storageGroupName, fastPolicyName, extraSpecs)

Add the storage group to the tier policy rule.

Parameters:
  • conn – the connection information to the ecom server
  • tierPolicyServiceInstanceName – tier policy service
  • storageGroupInstanceName – storage group instance name
  • tierPolicyRuleInstanceName – tier policy instance name
  • storageGroupName – the storage group name (String)
  • fastPolicyName – the fast policy name (String)
  • extraSpecs – additional info
Returns:

int – return code

Raises:

VolumeBackendAPIException

add_volume_to_default_storage_group_for_fast_policy(conn, controllerConfigService, volumeInstance, volumeName, fastPolicyName, extraSpecs)

Add a volume to the default storage group for FAST policy.

The storage group must pre-exist. Once added to the storage group, check the association to make sure it has been successfully added.

Parameters:
  • conn – the ecom connection
  • controllerConfigService – the controller configuration service
  • volumeInstance – the volume instance
  • volumeName – the volume name (String)
  • fastPolicyName – the fast policy name (String)
  • extraSpecs – additional info
Returns:

assocStorageGroupInstanceName - the storage group associated with the volume

delete_storage_group_from_tier_policy_rule(conn, tierPolicyServiceInstanceName, storageGroupInstanceName, tierPolicyRuleInstanceName, extraSpecs)

Disassociate the storage group from its tier policy rule.

Parameters:
  • conn – connection the ecom server
  • tierPolicyServiceInstanceName – instance name of the tier policy service
  • storageGroupInstanceName – instance name of the storage group
  • tierPolicyRuleInstanceName – instance name of the tier policy associated with the storage group
  • extraSpecs – additional information
format_default_sg_string(fastPolicyName)

Format the default storage group name

Parameters:fastPolicyName – the fast policy name
Returns:defaultSgName
get_and_verify_default_storage_group(conn, controllerConfigService, volumeInstanceName, volumeName, fastPolicyName)

Retrieves and verifies the default storage group for a volume.

Given the volumeInstanceName get any associated storage group and check that it is the default storage group. The default storage group should have been already created. If not found error is logged.

Parameters:
  • conn – the connection to the ecom server
  • controllerConfigService – the controller config service
  • volumeInstanceName – the volume instance name
  • volumeName – the volume name (String)
  • fastPolicyName – the fast policy name (String)
Returns:

foundDefaultStorageGroupInstanceName, defaultSgName

get_associated_policy_from_storage_group(conn, storageGroupInstanceName)

Get the tier policy instance name for a storage group instance name.

Parameters:
  • conn – the connection information to the ecom server
  • storageGroupInstanceName – storage group instance name
Returns:

foundTierPolicyInstanceName - instance name of the tier policy object

get_associated_pools_from_tier(conn, storageTierInstanceName)

Given the storage tier instance name get the storage pools.

Parameters:
  • conn – the connection information to the ecom server
  • storageTierInstanceName – the storage tier instance name
Returns:

list – a list of storage tier instance names

get_associated_tier_from_tier_policy(conn, tierPolicyRuleInstanceName)

Given the tierPolicyInstanceName get the associated tiers.

Parameters:
  • conn – the connection information to the ecom server
  • tierPolicyRuleInstanceName – the tier policy rule instance name
Returns:

list – a list of storage tier instance names

get_associated_tier_policy_from_storage_group(conn, storageGroupInstanceName)

Given the tier policy instance name get the storage groups.

Parameters:
  • conn – the connection information to the ecom server
  • storageGroupInstanceName – the storage group instance name
Returns:

list – the list of tier policy instance names

get_capacities_associated_to_policy(conn, arrayName, policyName)

Gets the total and un-used capacities for all pools in a policy.

Given the name of the policy, get the total capacity and un-used capacity in GB of all the storage pools associated with the policy.

Parameters:
  • conn – the ecom connection
  • arrayName – the array
  • policyName – the name of policy rule, a string value
Returns:

int – total capacity in GB of all pools associated with the policy

Returns:

int – real physical capacity in GB of all pools available to be used

Returns:

int – (Provisioned capacity-EMCSubscribedCapacity) in GB is the capacity that has been provisioned

Returns:

int – the maximum oversubscription ration

get_or_create_default_storage_group(conn, controllerConfigService, fastPolicyName, volumeInstance, extraSpecs)

Create or get a default storage group for FAST policy.

Parameters:
  • conn – the ecom connection
  • controllerConfigService – the controller configuration service
  • fastPolicyName – the fast policy name (String)
  • volumeInstance – the volume instance
  • extraSpecs – additional info
Returns:

defaultStorageGroupInstanceName - the default storage group instance name

get_policy_default_storage_group(conn, controllerConfigService, policyName)

Returns the default storage group for a tier policy.

Given the tier policy instance name get the associated default storage group.

Parameters:
  • conn – the connection information to the ecom server
  • controllerConfigService – ControllerConfigurationService instance name
  • policyName – string value
Returns:

storageGroupInstanceName - instance name of the default storage group

get_pool_associated_to_policy(conn, fastPolicyName, arraySN, storageConfigService, poolInstanceName)

Given a FAST policy check that the pool is linked to the policy.

If it’s associated return the pool instance, if not return None. First check if FAST is enabled on the array.

Parameters:
  • conn – the ecom connection
  • fastPolicyName – the fast policy name (String)
  • arraySN – the array serial number (String)
  • storageConfigService – the storage Config Service
  • poolInstanceName – the pool instance we want to check for association with the fast storage tier
Returns:

foundPoolInstanceName

get_tier_policy_by_name(conn, arrayName, policyName)

Given the name of the policy, get the TierPolicyRule instance name.

Parameters:
  • conn – the ecom connection
  • arrayName – the array
  • policyName – string – the name of policy rule
Returns:

tier policy instance name. None if not found

is_tiering_policy_enabled(conn, tierPolicyServiceInstanceName)

Checks to see if tiering policy is supported.

We will only check if there is a fast policy specified in the config file.

Parameters:
  • conn – the connection information to the ecom server
  • tierPolicyServiceInstanceName – the tier policy service instance name
Returns:

boolean – foundIsSupportsTieringPolicies

is_tiering_policy_enabled_on_storage_system(conn, storageSystemInstanceName)

Checks if tiering policy in enabled on a storage system.

True if FAST policy enabled on the given storage system; False otherwise.

Parameters:
  • conn – the ecom connection
  • storageSystemInstanceName – a storage system instance name
Returns:

boolean – isTieringPolicySupported

is_volume_in_default_SG(conn, volumeInstanceName)

Check if the volume is already part of the default storage group.

Parameters:
  • conn – the ecom connection
  • volumeInstanceName – the volume instance
Returns:

boolean – True if the volume is already in default storage group. False otherwise