.. Copyright 2012 New Dream Network, LLC (DreamHost) Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. ======================= Configuration Options ======================= For the list and description of configuration options that can be set for Ceilometer in order to set up the services please see the `Telemetry section `_ in the OpenStack Manuals Configuration Reference. Sample Configuration file ========================= The sample configuration file for Ceilometer, named etc/ceilometer/ceilometer.conf.sample, was removed from version control after the Icehouse release. For more details, please read the file etc/ceilometer/README-ceilometer.conf.txt. You can generate this sample configuration file by running ``tox -e genconfig``. .. _Pipeline-Configuration: Pipelines ========= Pipelines describe a coupling between sources of samples and the corresponding sinks for transformation and publication of the samples. A source is a producer of samples, in effect a set of pollsters and/or notification handlers emitting samples for a set of matching meters. See :doc:`plugins` for details on how to write and plug in your plugins. Each source configuration encapsulates meter name matching, polling interval determination, optional resource enumeration or discovery, and mapping to one or more sinks for publication. A sink on the other hand is a consumer of samples, providing logic for the transformation and publication of samples emitted from related sources. Each sink configuration is concerned `only` with the transformation rules and publication conduits for samples. In effect, a sink describes a chain of handlers. The chain starts with zero or more transformers and ends with one or more publishers. The first transformer in the chain is passed samples from the corresponding source, takes some action such as deriving rate of change, performing unit conversion, or aggregating, before passing the modified sample to the next step. The chains end with one or more publishers. This component makes it possible to persist the data into storage through the message bus or to send it to one or more external consumers. One chain can contain multiple publishers, see the :ref:`multi-publisher` section. Pipeline configuration ---------------------- Pipeline configuration by default, is stored in a separate configuration file, called pipeline.yaml, next to the ceilometer.conf file. The pipeline configuration file can be set in the *pipeline_cfg_file* parameter in ceilometer.conf. Multiple chains can be defined in one configuration file. The chain definition looks like the following:: --- sources: - name: 'source name' interval: 'how often should the samples be injected into the pipeline' meters: - 'meter filter' resources: - 'list of resource URLs' discovery: - 'list of discoverers' sinks - 'sink name' sinks: - name: 'sink name' transformers: 'definition of transformers' publishers: - 'list of publishers' The *name* parameter of a source is unrelated to anything else; nothing references a source by name, and a source's name does not have to match anything. The *interval* parameter in the sources section should be defined in seconds. It determines the cadence of sample injection into the pipeline, where samples are produced under the direct control of an agent, i.e. via a polling cycle as opposed to incoming notifications. There are several ways to define the list of meters for a pipeline source. The list of valid meters can be found in the :ref:`measurements` section. There is a possibility to define all the meters, or just included or excluded meters, with which a source should operate: * To include all meters, use the '*' wildcard symbol. * To define the list of meters, use either of the following: * To define the list of included meters, use the 'meter_name' syntax * To define the list of excluded meters, use the '!meter_name' syntax * For meters, which identify a complex Sample field, use the wildcard symbol to select all, e.g. for "disk.read.bytes", use "disk.\*" The above definition methods can be used in the following combinations: * Only the wildcard symbol * The list of included meters * The list of excluded meters * Wildcard symbol with the list of excluded meters .. note:: At least one of the above variations should be included in the meters section. Included and excluded meters cannot co-exist in the same pipeline. Wildcard and included meters cannot co-exist in the same pipeline definition section. A given polling plugin is invoked according to each source section whose *meters* parameter matches the plugin's meter name. That is, the matching source sections are combined by union, not intersection, of the prescribed time series. The optional *resources* section of a pipeline source allows a list of static resource URLs to be configured. An amalgamated list of all statically configured resources for a set of pipeline sources with a common interval is passed to individual pollsters matching those pipelines. The optional *discovery* section of a pipeline source contains the list of discoverers. These discoverers can be used to dynamically discover the resources to be polled by the pollsters defined in this pipeline. The name of the discoverers should be the same as the related names of plugins in setup.cfg. If *resources* or *discovery* section is not set, the default value would be an empty list. If both *resources* and *discovery* are set, the final resources passed to the pollsters will be the combination of the dynamic resources returned by the discoverers and the static resources defined in the *resources* section. If there are some duplications between the resources returned by the discoverers and those defined in the *resources* section, the duplication will be removed before passing those resources to the pollsters. There are three ways a pollster can get a list of resources to poll, as the following in descending order of precedence: 1. From the per-pipeline configured discovery and/or static resources. 2. From the per-pollster default discovery. 3. From the per-agent default discovery. The *transformers* section of a pipeline sink provides the possibility to add a list of transformer definitions. The names of the transformers should be the same as the names of the related extensions in setup.cfg. For a more detailed description, please see the `transformers`_ section of the Administrator Guide of Ceilometer. .. _transformers: http://docs.openstack.org/admin-guide/telemetry-data-collection.html#transformers The *publishers* section contains the list of publishers, where the samples data should be sent after the possible transformations. The names of the publishers should be the same as the related names of the plugins in setup.cfg. The default configuration can be found in `pipeline.yaml`_. .. _pipeline.yaml: https://git.openstack.org/cgit/openstack/ceilometer/tree/etc/ceilometer/pipeline.yaml Pipeline Processing ------------------- On large workloads, multiple notification agents can be deployed to handle the flood of incoming messages from monitored services. If transformations are enabled in the pipeline, the notification agents must be coordinated to ensure related messages are routed to the same agent. To enable coordination, set the ``workload_partitioning`` value in ``notification`` section. To distribute messages across agents, ``pipeline_processing_queues`` option should be set. This value defines how many pipeline queues to create which will then be distributed to the active notification agents. It is recommended that the number of processing queues, at the very least, match the number of agents. .. note:: Increasing the number of processing queues will improve the distribution of messages across the agents. .. warning:: Decreasing the number of processing queues may result in lost data as any previously created queues may no longer be assigned to active agents. It is only recommended that you **increase** processing queues. Publishers ++++++++++ For more information about publishers see the `publishers`_ section of the Administrator Guide of Ceilometer. .. _publishers: http://docs.openstack.org/admin-guide/telemetry-data-retrieval.html#publishers